Innovac GmbH Used machines from Germany
Innovac used-machines Other machines [1 - 20 of 61]
CNC-machining-center-Maka-Systems-DC-3 used
CNC machining center
Maka Systems DC 3
Germany
2016
used
on request
INNO32848
Offered is a 3-axis CNC machining center for dry machining of granite or ceramics. Equipment: acoustic enclosure, extraction system with cartridge filtration, tool magazine. Inspection possible by arrangement.
Bale-Press-Macfab-LH300 used
Bale Press
Macfab LH300
Germany
2021
used
on request
INNO32834
Offered is one of two identical hydraulic vertical balers for paper and cardboard. Year of manufacture 2021, machine 1 with 17.8 operating hours. Inspection possible by arrangement.
Hydraulic-Briquette-Press-Nestro-NBV-55 used
Hydraulic Briquette Press
Nestro NBV 55
Germany
unknown
used
on request
INNO32812
Throughput capacity: approx. 50-75kg/h, motor power: 5.5kW, on-site inspection is possible.
Concrete-Block-Making-Machine-Omag-S22-140-90 used
Concrete Block Making Machine
Omag S22 140-90
Germany
2001
used
on request
INNO32766
Offered is a concrete block making machine with servo-driven vibration. Control: S7, retrofitted in 2016 according to documentation, additional hydraulic unit for the tamper head, digital position measurement for the mould and tamper head, main mix filling box, documented upgrades: 2016: conversion to servo-driven vibration and S7 control, 2017: digital position measurement for the mould and tamper head plus new main mix filling box, 2020: additional hydraulic unit for the tamper head. Inspection possible by arrangement.
Shredder-Lindner-Jupiter-3200 used
Shredder
Lindner Jupiter 3200
Germany
2010
used
on request
INNO32590
A shredder with control cabinet, three spare motors and discharge conveyor is available: 1) Lindner Jupiter 3200 shredder, dimensions: 6500x2500x3200mm, weight: 36t, operating hours: 58545h, with hopper, operator panel and hydraulic power unit. 2) Control cabinet for Jupiter 3200, dimensions: 3000x2000x600mm, weight: 980kg, with frequency converter, water cooling units and recooling unit. 3) Spare motor ABB M3BP 315LKA 6, power: 160kW, speed: 994rpm, IE3, dimensions: 1200x800x600mm, weight: 1.41t, is unused. 4) 2x spare motor Schorch 315L IMB3, power: 160kW, speed: 988rpm, dimensions: 1200x800x600mm, weight: 1.3t. 5) Inclined conveyor FC H101 1200/9200, dimensions: 9200x1500x1800mm, weight: 1.7t. The machine was regularly serviced by the manufacturer. During annual rotor maintenance, the rotor was fully hardfaced. The track was retensioned every three months. New motors with energy efficiency class IE3 were installed in 2021. The foreign object flap was replaced in 2024. Two couplings were replaced in 2024. The machine is operational. An on-site inspection is possible. The machine is not connected to the power supply.
Natural-Gas-Filling-Station-Schwelm-Anlagentechnik used
Natural Gas Filling Station
Schwelm Anlagentechnik
Germany
2016
used
on request
INNO32527
Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation.
Pyrolysis-Plant-Pyreg-P500 used
Pyrolysis Plant
Pyreg P500
Germany
2020
used
on request
INNO32447
Design: modular containerized system, process: continuous pyrolysis/thermochemical carbonization, reactors: 2, feedstocks: wood/landscape maintenance material/biomass, thermal output: approx. 150kW, biochar production: approx. 300t/year, operating mode: autothermal, flue gas recirculation: available, burner: FLOX, discharge: water-cooled and airtight, degree of automation: fully automatic, control: Siemens S7-300, operator panel: Siemens TP1200 Comfort, automatic mode operating hours: approx. 7069h. Process container dimensions X/Y/Z: approx. 9000mm/3000mm/2800mm, process container weight: approx. 14t, flue gas treatment container dimensions X/Y/Z: approx. 3000mm/3000mm/2800mm, flue gas treatment container weight: approx. 4t. Including Bruns walking floor container with approx. 30m³ dosing hopper, inclined screw conveyor, bagging station and conveying spirals. A drying system for wood chips is optionally available. Documentation available. An on-site inspection is possible.
Contour-Wire-Saw-Baumunk-KSSF-2000-UNIKONTUR used
Contour Wire Saw
Baumunk KSSF 2000 UNIKONTUR
Germany
2000
used
on request
INNO32409
A Baumunk contour wire saw in need of repair is offered. Drive power: 5.5kW, control: Bosch OSA. The machine has been idle for about one year. Contour sawing was still working well when last used. The mounting for the grinding rollers is defective. Inspection by appointment possible.
Roller-Furnace-Studio-1-ST1-FRM-9-1200-1250° used
Roller Furnace
Studio 1 ST1 FRM 9/1200/1250°
Germany
1997
used
on request
INNO32314
Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.
Horizontal-Baling-Press-Hsm-AK-10-900 used
Horizontal Baling Press
Hsm AK 10/900
Germany
1987
used
on request
INNO32303
Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.
Bale-Press-Hsm-155.2-VL used
Bale Press
Hsm 155.2 VL
Germany
2001
used
on request
INNO32062
Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.
Glass-Cutting-System-Hegla-VSG-A-46-MT used
Glass Cutting System
Hegla VSG-A 46 MT
Germany
2002
used
on request
INNO31843
A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.
Bale-Press-Mac-Fab-MF-LH300 used
Bale Press
Mac Fab MF LH300
Germany
2020
used
on request
INNO31698
A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible.
Glass-Furnace-Efco-Furnaces-2400-x-4200-Glass-Temp used
Glass Furnace
Efco Furnaces 2400 x 4200 Glass Temp
Germany
1997
used
on request
INNO31677
A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible.
Glass-Cutting-System-Lisec-ESL-60-30RS used
Glass Cutting System
Lisec ESL-60/30RS
Germany
1998
used
on request
INNO31247
A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.
Vacuum-Angle-Valve-Leybold-BAV-DN800-ISO-F-EP-VA used
Vacuum Angle Valve
Leybold BAV DN800 ISO-F EP VA
Germany
unknown
used
on request
INNO31055
Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.
Shredder-Burghardt-PS-Starter used
Shredder
Burghardt PS Starter
Germany
2021
used
on request
INNO30995
A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.
Dewatering-Machine-Hiller-DCH76-402 used
Dewatering Machine
Hiller DCH76-402
Germany
2010
used
on request
INNO30966
A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.
Sand-Blasting-Machine-S.a.g.-T3-T4 used
Sand Blasting Machine
S.a.g. T3/T4
Germany
2005
used
on request
INNO30958
Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.
Shredder-Erdwich-M600-1-600 used
Shredder
Erdwich M600/1-600
Germany
2021
used
on request
INNO30878
A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.