▷ Używane inne maszyny z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inne maszyny

Ceramika, kamienie i ziemia 5 Maszyny specjalne 9 Maszyny szklane 25 Technika miejska 2 Technologia próżniowa 3 Zarządzanie odpadami, recykling 21

Innovac maszyny-uzywane

Inne maszyny [1 - 20 of 65]

Pralka do szkła

Lisec VHW-20/6

Niemcy

2008

używany

na żądanie

INNO30489

A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement.

Urządzenie do czyszczenia płytek drukowanych

Mbtech NC25

Niemcy

2018

używany

na żądanie

INNO30488

Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement.

Prasa PET

Strautmann BP 900

Niemcy

2008

używany

na żądanie

INNO30474

A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.

System regranulacji

Erema INTAREMA 1310 TVEplus RegrindPro

Niemcy

2022

używany

na żądanie

INNO30451

Recycling system with regranulation line, conveyor belt, roller infeed, granulate dosing unit, twin-screw stuffing unit and bagging station, 1) Regranulation line, components: Piovan feeding, backflush filter, extraction system, process-water tank, hot-die-face granulation, granulate dewatering screen, water pump station, granulate scale, granulate centrifugal dryer, granulate conveying system, filling station, swivel side wall for PCU hood. Throughput capacity MDPE, LDPE: 650-725kg/h, PCU drive: 132kW, weight: 12,680kg, extraction system air capacity: max. 3000m³/h, weight: 174kg, process-water tank filling volume: approx. 860l, backflush filter screen diameter: 215mm, number of screen packs: 4, hot-die-face granulation number of knives: 4, knife head speed: 1420/min, granulate dewatering screen dimensions: 1900x700mm, oversize separation: less than 20mm, trough volume: 470l, granulate centrifugal dryer drive power: 7.5kW, granulate conveying system air capacity: max. 1900m³/h, length (without BigBag station): approx. 11,642mm, width: approx. 8000mm, 2) Conveyor belt with hopper, level sensor and double-layer metal detector, weight: approx. 950kg, belt dimensions: 7000x1100mm, with cleats, metal detector coil aperture: 1300x400mm, detection: all metals, measuring accuracy: Fe= M6 nut, V2A= M10 nut, technology: digital, alarm: visual and acoustic, 3) Roller infeed, infeed cross-section: 450x150mm, drive power: 1x 1.5kW, max. infeed speed: 20m/min, 4) Granulate dosing unit, operating principle: gravimetric, bulk density: 0.6kg/dm³, dosing range: 4-40kg/h, 5) Twin-screw stuffing unit, bulk density: 0.6kg/dm³, throughput capacity: max. 100kg/h, screw diameter: 40mm, 6) Bagging station, frame: for 2 BigBags, diverter: pneumatic, with level sensor, operating hours reading: 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible.

Rozdrabniacz

Vecoplan VIZ 1300 S

Niemcy

2022

używany

na żądanie

INNO30449

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW, 3) Lifting-tilting device, with safety guard and safety light curtain, lifting capacity: approx. 500kg, tilting angle: 150°, discharge height: approx. 3390mm, container length/depth: 857mm, container width at discharge edge: 1060mm, container height: 916.5mm, container clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight with product: 500kg, container volume: 0.5m³, lifting and discharge speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A, transport chain: 2 pcs., safety chains/chain break protection: yes, chain breaking force per strand: 70,000N, operating hours reading: approx. 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible.

Instalacja do przesiewania

Gkm KTS 2000/4

Niemcy

2019

używany

na żądanie

INNO30334

A GKM tumbling screen machine including a bolt screen changer with backflush function is available. Screen area: 2.6m², diameter: 1900mm, grain size: 1µm-20µm, screening capacity: 1kg-50000kg/h, bulk density range: 20-10000g/l, separation range: 20µm-20 mm, screen decks: 4, speed: 180rpm, height: approx. 1750mm, weight: approx. 1500kg. Documentation available. On-site viewing is possible.

Rozdrabniacz

Lindner Micromat Plus 2500

Niemcy

nieznany

używany

na żądanie

INNO30258

A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible.

Pozostałe zapasy

Siemens S7-1500/S7-300

Niemcy

nieznany

używany

na żądanie

INNO30121

A high-cube industrial container including two control cabinets, a twin-shaft shredder, and various conveying and transport systems is available as a package offer. 1) Industrial container with double-side opening and base frame. Contents: screw press discharge unit, hopper, vacuum drum, vacuum pump Atlas Copco DZS 300V, condensation unit, and various auxiliary electric motors. 2) Control cabinet with Siemens Simatic S7-1500 control system, control panel: Siemens KTP 700. 3) Control cabinet with Siemens Simatic S7-300 control system. 4) Industrial twin-shaft shredder, rotor shafts: 2, motor/gearbox: Brevini/Dana. 5) Conveying and transport system with an attached feeding unit. The container, its contents, and all listed units are part of a package offer. An on-site inspection is possible.

Robot czyszczący

Cleanfix RA 660 Navi

Niemcy

nieznany

używany

na żądanie

INNO30009

Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.

Dwustronna szlifierka i polerka

Bottero 222L

Niemcy

2018

używany

na żądanie

INNO29999

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

Dwustronna szlifierka do szkła i myjka

Scheppach/ Abb/ Kuka/ 2500 C4/0E

Niemcy

2012

używany

na żądanie

INNO29905

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible.

Stół montażowy

Bott Gmbh IGUS TC14 006 553

Niemcy

2016

używany

na żądanie

INNO29904

Twelve identical assembly tables are available. Length: 2020mm, width: 82mm, height: 240mm. No defects known, one of the tables has a newer worktop, without documentation. An on-site inspection is possible.

Szlifierka

Carl Zeiss OVS 250

Niemcy

1990

używany

na żądanie

INNO29726

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

Piec do szkła

Uniglass UGTPLUS 1548-1-R

Niemcy

2010

używany

na żądanie

INNO29685

A single-chamber glass tempering furnace (pre-stressing system) Uniglass for the toughening process of safety glass is available. Heating capacity: 690kW, motor power: 870kW, total power: 1570kW, minimum diagonal dimension: 290mm, glass thickness range: 2.85mm–15mm, max. glass dimensions X/Y: 4800mm/1500mm. The ceramic rollers are in poor condition. Documentation available. An on-site inspection is possible. Expected to be available from November 2025.

Szafka do badania oświetlenia

Torgauer Maschinenbau 45.124

Niemcy

2002

używany

na żądanie

INNO29684

A vertical glass storage cabinet TMB with integrated lighting for inspecting glass sheets is available. Load capacity: 2000kg, machine dimensions X/Y/Z: approx. 6550mm/1250mm/3600mm, weight: approx. 1750kg. The lighting may need to be checked and possibly replaced. An on-site inspection is possible.

Zamiatarka

Satac/haaga

Niemcy

nieznany

używany

na żądanie

INNO29680

Two manually operated sweepers, one Satac and one Haaga, are available. An on-site inspection is possible.

Urządzenie do piaskowania szkła

Mhg Glasmaster 1500 Automatic

Niemcy

1999

używany

na żądanie

INNO29606

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Instalacja regeneracyjna

Erema

Niemcy

1988

używany

na żądanie

INNO29589

A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible.

Maszyna do cięcia szkła CNC

Bottero BCM

Niemcy

1992

używany

na żądanie

INNO29196

A CNC glass cutting table Bottero including A-frames is available. 1) CNC cutting table Bottero BCM, year of manufacture: 1992. 2) A-frame for glass, length: 5200mm, width: 1200mm, height: 3200mm, support surface: 350mm. Documentation available. On-site inspection is possible.

Maszyna CNC do obróbki szkła

Mdi MP500-CE

Niemcy

2009

używany

na żądanie

INNO29151

A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible.