▷ Used textile machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Textile machinery

Cutting machines 10 Dyeing equipment 1 Ironing machines 3 Knitting machines 5 Other machinery 19 Periphery machines 8 Printing machinery 3 Punching machines 2 Sewing-machines 13 Stentering frames 5 Weaving machines 1

Innovac used-machines

Textile machinery [1 - 20 of 70]

Air and Fiber Management System

Trützschler/protec FBK 536/2400

Germany

1998

used

on request

INNO29463

A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.

Textile Printer

Dtg Viper 2

Germany

unknown

used

on request

INNO29445

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

Pillow Filling Machine

Nowo VAC/PA-1200/RKT-MINI

Germany

1995

used

on request

INNO29442

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

Sewing Machine

Brother/adler/mauser/brother LS2/K767/MA335/KE403

Germany

2017

used

on request

INNO29419

A total of 5 sewing machines from various manufacturers are available. 1) Brother LS2-B837. 2) Adler K767 990001. 3) Mauser MA335-G-6/01-BLN. 4) Brother KE-430 FX-05, year of manufacture: 2017, needle: 135x172 Nm110. 5) Dürkopp Adler. On-site inspection is possible.

Sole Punching Machine

Samco TH-35

Germany

1992

used

on request

INNO29375

A Samco/USM cart beam punching machine for the production of shoe soles is available. Pressing force: 35t, table dimensions X/Y: 660mm/2260mm, punching head dimensions X/Y: approx. 635mm/660mm, operating pressure: approx. 300bar, machine weight: approx. 2500kg. Including roller holder, unwinding table and tools. Documentation available. On-site inspection is possible.

Winding Machine

Sahm 260 E

Germany

1995

used

on request

INNO29349

A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.

Stenter Frame

Brückner

Germany

1986

used

on request

INNO29144

A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.

Winding Machine

Sahm 400E

Germany

1999

used

on request

INNO29135

A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.

Rolling Machine

Polymaster

Germany

2009

used

on request

INNO29076

A total of two fabric foaming machines (rolling machines) are available for the textile industry, used in the quality inspection of materials/products. 1) Fabric foaming machine for packaging from 30m, max. reel weight: 1000kg, year of manufacture: 2009. 2) Rolling machine, year of manufacture: 2009, film width: 3300mm, reel diameter: 1000mm, max. reel weight: 1000kg. Including additional film packaging. Documentation available. On-site inspection is possible. Individual sale possible.

Stenter Frame

Muzzi RAMEUSE SIGMA H

Germany

2003

used

on request

INNO29029

Drying type: direct heating with natural gas, working width: 700-1800m, working speed: 3-60m/min, number of drying fields: 5, drying zone length: 15, temperature range: 50-210°C, max. firing heat output: 5x 230kW, processes: appretieren, connected load: 130kW, total length: approx. 25,000mm. Heating control defective (frequency converter), edge cut is not included. On-site inspection is possible.

Textile Laser Cutting Machine

Sei Laser Mercury 2030 Conveyor 3

Germany

2023

used

on request

INNO29012

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available.

Needle Loom

Dilo OD 2-25/CBF-25

Germany

1986

used

on request

INNO28919

A Dilo needling machine including a finger feeder modernized in 2020 is available. 1) Needling machine Dilo OD 2-25, year of manufacture: 1986, working width: 2500mm, needle density: 12000 needles/m, needle boards: double board from above, stroke frequency: 1200rpm, needle bar stroke: 60mm. 2) Finger feeder Dilo CBF-25, year of manufacture: 1989, modernized/rebuilt: 2020, documentation available. On-site inspection is possible.

Textile Printer

Durst/klieverik Rhotex 320/GTC81-3400

Germany

2012

used

on request

INNO28918

A Durst textile printer including Klieverik calender is available. 1) Large format textile printing machine Durst Rhotex 320 for sublimation prints, year of construction: 2012, print type: inkjet, max. print width: 3200mm, max. media thickness: 2mm, resolution: 600dpi, print speed: 65m²/h, colors: CMYK. Machine dimensions X/Y/Z: approx. 6800mm/1700mm/2000mm, weight: approx. 4500kg, printed area: approx. 385000m². Including dye sublimation and workstation. Two print heads must be replaced. 2) Transfer calender Klieverik GTC81-3400, year of construction: 2009, working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Including low-voltage winder, year of construction: 2019, documentation available. On-site inspection is possible. Only package sale possible.

CNC Cutter

Kuris ZAT III CNC

Germany

unknown

used

on request

INNO28855

A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible.

Laser Cutting Machine

Cadcam FB 2000

Germany

unknown

used

on request

INNO28830

A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.

Cutting Table

Asco PS 50

Germany

2010

used

on request

INNO28770

Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. On-site inspection is possible.

3-Needle Hemming Machine

Juki MF7913

Germany

unknown

used

on request

INNO28742

A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.

Direct Printer

Kornit Breeze 921

Germany

2013

used

on request

INNO28367

A DTG (Direct-to-Garment) Kornit printer is available. Printing method: Direct printing on textiles, printhead type: piezoelectric Spectra printheads, number of printheads: 6, nozzles per printhead: 256, colors: CMYK + white, max. print resolution: 1200dpi, print area X/Y: 350mm/450mm. Materials: cotton, polyester, cotton-polyester blends, lycra, viscose, silk, leather, denim, linen, wool, etc. Printing capacity: Light textiles A4: 40/h, Dark textiles A4: 25/h. Machine dimensions X/Y/Z: approx. 1150mm/1500mm/700mm, weight: approx. 200kg. The print heads of the machine must be cleaned. An on-site inspection is possible.

Sectional Warping Machine

Textima DS 42/30

Germany

1986

used

on request

INNO27521

There are 6 warping machines and 1 warp knitting machine available. 1) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1170, warping speed: 500m/min. 2) Warping machine Textima DS 42/30, year of construction: 1986, positions: 672, warping speed: 500m/min. 3) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. 4) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1344, warping speed: 500m/min. 5) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 700, warping speed: 500m/min. 6) Textima DS 42/30 warping machine, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. All warping machines were equipped with yarn monitoring devices, lint monitors or camera monitoring (CAM-SCAN and Protecha) and KFD brakes. 7) Warp knitting machine Textima Liba Excentra type 94, can be inspected on site.

Fusing Machine

Meyer RPS L-400/RPS L-600

Germany

2015

used

on request

INNO28130

Two Meyer fusing machines are available for the textile industry. 1) Fusing machine Meyer RPS L-400, year of manufacture: 2015, fusing width: 400mm, connected load: 3.3kW, belt speed range: 1m-9m/min, max. pressing pressure: 50N/cm², max. temperature: 200°C, machine dimensions X/Y/Z: approx. 1700mm/900mm/450mm, weight: approx. 150kg. 2) Fusing machine Meyer RPS-L, year of manufacture: 2002, fusing width: 600mm, max. temperature: 200°C, belt speed range: 1m-9m/min, connected load: 5kW, max. pressing pressure: 35N/cm², machine dimensions X/Y/Z: approx. 1700mm/1100mm/450mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.