Maszyna do skręcania przędzy pierścieniowej

Galan TW-250/2

Niemcy

1998

używany

na żądanie

INNO32404

Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible.

więcej

Maszyna do skręcania przędzy pierścieniowej

Galan MULTI 1XS

Niemcy

2003

używany

na żądanie

INNO32402

Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible.

więcej

Maszyny do szycia

Dürkopp/adler 220-76 / 767-FA-373 / K767

Niemcy

1999

używany

na żądanie

INNO32399

A package of five Dürkopp/Adler industrial sewing machines is offered. 1) Dürkopp industrial sewing machine. 2) Adler 220-76 long-arm industrial sewing machine. 3) Dürkopp industrial sewing machine. 4) Dürkopp Adler 767-FA-373-RAP industrial sewing machine, type: 0767 990015, year of manufacture: 1999. 5) Dürkopp Adler K767 industrial sewing machine. Inspection possible by prior arrangement.

więcej

Pozioma maszyna do plecenia

Steeger K80/16-72

Niemcy

1990

używany

na żądanie

INNO32393

Number of carriers: 16, an on-site inspection is possible.

więcej

Pozioma maszyna do plecenia

Steeger HS 120/32 Z

Niemcy

2002

używany

na żądanie

INNO32392

Number of carriers: 32, an on-site inspection is possible.

więcej

Pozioma maszyna do plecenia

Steeger HS 80/80-KOLL

Niemcy

2009

używany

na żądanie

INNO32391

Number of carriers: 80, an on-site inspection is possible.

więcej

Maszyna do strzyżenia

F. M. Hämmerle

Niemcy

nieznany

używany

na żądanie

INNO32386

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

więcej

Maszyna do układania tkanin

Badets A & Fils Sarl DERTAN-B

Niemcy

2017

używany

na żądanie

INNO32330

Working width: 2500mm, an on-site inspection is possible, not under power.

więcej

Maszyna wiążąca

Kettma Hamburg 100 KA

Niemcy

1968

używany

na żądanie

INNO32319

Four identical Kettma Hamburg 100 KA linking machines, one KMF 105 linking machine, Series 5, and spare parts are available, an on-site inspection is possible.

więcej

Pakiet maszyn do szycia

Pfaff 1183/563/134/463

Niemcy

nieznany

używany

na żądanie

INNO32240

Seven Pfaff industrial sewing machines are available. 1) 2 × Pfaff 1183 industrial sewing machines, one with drive and one without drive, stitch type: lockstitch 301, needle system: DBx1/134R, needle size: 60Nm-90Nm, max. stitch length: 4.5mm, max. sewing speed: 5500stitches/min, needle bar stroke: 32mm/36mm, presser foot clearance: 9mm-13mm, working space X/Y: 260mm/125mm, sewing head dimensions X/Y/Z: approx. 550mm/180mm/300mm, sewing head weight: approx. 30kg. 2) Pfaff 563 industrial sewing machine with drive, stitch type: lockstitch 301, max. sewing speed: 5500stitches/min, max. stitch length: 3.5mm/4.5mm, needle system: 134, needle size: 60Nm-100Nm, needle bar stroke: 33mm, balance wheel diameter: 65mm. 3) Pfaff 134 industrial sewing machine without drive, single-needle flatbed version with horizontal rotary hook, needle system: 134, working space X/Y: 295mm/140mm, max. sewing speed: approx. 3150stitches/min, forward and reverse sewing possible. 4) 3 × Pfaff 463 industrial sewing machines. In total, five machines with drive and two machines without drive are available. An on-site inspection is possible.

więcej

Maszyna do formowania tylnej części

Sabal 3224.CF.OPT.19.21

Niemcy

2012

używany

na żądanie

INNO32223

A Sabal backpart moulding machine for shaping shoe counters and heel areas is offered. Hot activation stations: 2, cold pressing stations: 2, quick-change device for pads and lasts, pincer pull device: adjustable with millimetric precision, pincer pull at activation and pressing stations, valve monitoring, mechanical stops at the pressing stations, switchable heated pressing station for processing Lefa counters, flanging function. Weight: approx. 600kg, machine dimensions X/Y/Z: approx. 1760mm/800mm/1750mm. Documentation available. An on-site inspection is possible.

więcej

Pakiet maszyn do przyszywania/mocowania guzików

Juki/herbert Meyer MB-373/RPS-L 600

Niemcy

1999

używany

na żądanie

INNO32203

Two Juki button sewing machines and one Herbert Meyer fusing machine are available. 1) 2x Juki MB-373 button sewing machines, stitch type: single-thread chainstitch, max. sewing speed: 1500stitches/min, number of stitches: 8/16/32, crosswise feed: 2.5mm-6.5mm, lengthwise feed: 0mm/2.5mm-6.5mm, button size range: 10mm-28mm, needle bar stroke: 48.6mm. 2) Herbert Meyer RPS-L 600 fusing machine, year of manufacture: 1999, fusing width: 600mm, max. belt speed range: 9m/min, max. pressing pressure: 3.5bar. Oil level and needles should be checked. On-site inspection is possible.

więcej

Krosno chwytakowe

Somet Thema 11

Niemcy

1987

używany

na żądanie

INNO32188

Working width: 2100mm, weft insertion system: flexible rapier, max. weft colors: 8, max. machine speed: approx. 320rpm, max. weft insertion rate: approx. 650m/min, dobby: Stäubli type 2600, max. dobby capacity: 20, max. warp beam diameter: approx. 800mm. Machine dimensions X/Y/Z: approx. 3950mm/1950mm/1850mm, machine weight: approx. 3200kg. Inspection possible by arrangement.

więcej

Pakiet maszyn do obróbki tekstyliów i cięcia

Atom / Trotec / Dürkopp Adler / Juki FlashCut 222 / Rayjet 50 / 867-190020-M / DDL-9000B-SS

Niemcy

2020

używany

na żądanie

INNO32161

A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment.

więcej

Maszyna do podklejania i nawijania tkanin

Demsan T2/B-22

Niemcy

2017

używany

na żądanie

INNO32130

Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement.

więcej

Maszyna do plecenia

Herzog QU 2-1-12-16-200

Niemcy

2023

używany

na żądanie

INNO32075

A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible.

więcej

Maszyna do odpakowania beli

Temafa BÖ-KSP 0347

Niemcy

1992

używany

na żądanie

INNO32032

Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible.

więcej

Automat do pikowania

Stutznäcker SNA 2000

Niemcy

1993

używany

na żądanie

INNO32030

6 Stutznäcker single-needle lockstitch sewing automats are offered. Outside frame size X/Y: 1900mm/2600mm, max. stitch rate: 2600stitches/min, sewing type: lockstitch, sewing head/gantry: Mammut Class 750, linear unit X-axis: Hauser HLE 150 (installation position right), Y-axis traverse: ball screws/linear guide rails, control system: Hauser Comtac 2000. Equipment: Electronically synchronized separate drive for needle and hook, pneumatic presser foot lift, upper thread monitor, frame coding for safety monitoring, coated table plates as frame supports within the travel area, various frames, spare hooks, electrical cabinet on the right, operator panel on the right-hand side table and left-hand side table with pneumatically lowerable table top (max. 200mm) and surrounding support for the frame. Four sewing automats were retrofitted in 2007, two sewing automats in 2006. Dimensions X/Y: approx. 5000mm/7000mm, weight: approx. 2000kg. The machines are available from April 2027. Inspection possible by appointment.

więcej

Stół do prasowania

Veit Varioset

Niemcy

2013

używany

na żądanie

INNO31838

Various Veit ironing tables including Reverberi steam generators are available. 1) 7x Veit Varioset flat ironing table, ironing surface: 1300mm/650mm, height adjustment range: 830mm-990mm, weight: approx. 120kg. 2) 5x Veit pointed ironing table, ironing surface: 1100mm/380mm, weight: approx. 120kg. 3) 3x Reverberi GAK5DP steam generator, year of manufacture: 2013, version: Duplex, heating capacity: 5kW, operating pressure: 3bar. In addition, two steam generators and one flat ironing table are included as defective units. Documentation available. An on-site inspection is possible. Sale only as one complete package.

więcej

Maszyna do igłowania

Dilo OD-II HVL 55 / OUG-II S50 / OD-II 55

Niemcy

2000

używany

na żądanie

INNO31776

3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment.

więcej

Wszystkie oferty / Maszyny włókiennicze