Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [881 - 900 of 2529]

Punching Line

Helmerding KDH 100

Germany

1997

used

on request

INNO28380

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Coating Line

Wmv TA700

Germany

1996

used

on request

INNO28379

A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible.

CNC Composite Machining Center

Flow

Germany

2010

used

on request

INNO28378

A complete CNC composite machining center (CMC) for the plastics industry is available. Axes: 13, number of spindles: 1, channel 1: X(U)/Y1/Z1/C1/B1/A1, channel 2: X(U)/Y2/Z2/C2/B2/W21, channel 3: X(U)/W21. Spindle type: S2, temperature sensors: built-in, travel X/Y1/Z1: 15000mm/4550mm/1500mm, C1: +/-270°, B1: +/-180°, rotary axis turning capacity: 45°/s, rapid traverse X/Y/Z: 10m/min, feed X/U: 25m/min, feed Y/Z: 15m/min, feed (manual): 5m/min, control: Siemens 840D. Including 7x flow water jet pumps, Ebbco metalworking filter system and flow abrasive management system. Documentation available. On-site inspection is possible. The entire system is intended as a spare parts carrier.

Evaporator

Bitzer KE-151

Germany

2001

used

on request

INNO28377

A semi-hermetic condenser unit including compressor and two ceiling evaporators is available. 1) Condenser Bitzer KE-151, year of construction: 2001, leak test: 2023, refrigerant: R134A, cooling capacity: 16kW, suction diameter: 54mm, pressure diameter: 28mm, liquid receiver: F302H, volume: 30l, max. operating temperature: 120°C, max. operating pressure: 26bar. 2) Two ceiling evaporators Günther DHN051C/27, max. operating overpressure: 28bar, max. operating temperature: 100°C, volume: 29l, rated output: 18.9kW, area: 102m², air volume flow: 1124m³/h, throw distance: 2x14m, extraction capacity: 7.2kW. Fan type: VT0139, fan diameter: 500mm, speed: 1380rpm. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/450mm. Documentation available. On-site inspection is possible. Individual sale possible.

CNC Laser Cutting Machine

Trumpf Trumatic L 3030 2000W

Germany

2006

used

on request

INNO28376

A Trumpf CNC laser cutting machine is available. Laser power: 2000W (2kW), travel X/Y/Z: 3000mm/1500mm/115mm, max. sheet thickness mild steel/stainless steel/aluminum: 12mm/6mm/5mm, laser type: TLF 2000TM, connected load: 63kVA. Rapid traverse X/Y: 60m/min, simultaneous rapid traverse X+Y: 85m/min. Machine dimensions X/Y/Z: approx. 10000mm/5300mm/2000mm, weight: approx. 11500kg, laser on: 90834h, beam on: 33269h. Documentation available. On-site inspection is possible.

Vertical Bag Forming, Filling and Sealing Machine

Rovema MVP 220

Germany

1985

used

on request

INNO28375

Two Rovema vertical form fill and seal machines are available. The two machines were converted by Burtscher. Packaging capacity: approx. 1200/min, film width 1/2: 470mm/260mm, film length: 340mm/230mm, bag volume: 2000g/500g with the above-mentioned widths and lengths. Machine dimensions X/Y/Z: approx. 2000mm/1800mm/3200mm. The machines show signs of use and defects in the bag sealing. On-site inspection is possible.

CNC 4 Axis Machining Center

Maka PM210X

Germany

2005

used

on request

INNO28374

A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible.

Banding Machine

Meurer FILMline CMB 600

Germany

2015

used

on request

INNO28373

A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible.

Tall Form Dryers

Spx Flow Anhydro/APV Type II K

Germany

1988

used

on request

INNO28372

A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.

Vacuum-Double-Planetary Mixing Unit

Herbst HRV-S 120 DP

Germany

2019

used

on request

INNO28370

Voltage: 400V, max. container capacity: 80kg, recommended container weight: 50kg-60kg, weight: approx. 400kg. Including vacuum pump and agitator. On-site inspection is possible.

Automatic Pick and Place System

Ishida IPS FLEX SINGLE LANE

Germany

2015

used

on request

INNO28368

Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible.

Direct Printer

Kornit Breeze 921

Germany

2013

used

on request

INNO28367

A DTG (Direct-to-Garment) Kornit printer is available. Printing method: Direct printing on textiles, printhead type: piezoelectric Spectra printheads, number of printheads: 6, nozzles per printhead: 256, colors: CMYK + white, max. print resolution: 1200dpi, print area X/Y: 350mm/450mm. Materials: cotton, polyester, cotton-polyester blends, lycra, viscose, silk, leather, denim, linen, wool, etc. Printing capacity: Light textiles A4: 40/h, Dark textiles A4: 25/h. Machine dimensions X/Y/Z: approx. 1150mm/1500mm/700mm, weight: approx. 200kg. The print heads of the machine must be cleaned. An on-site inspection is possible.

Sectional Warping Machine

Textima DS 42/30

Germany

1986

used

on request

INNO27521

There are 6 warping machines and 1 warp knitting machine available. 1) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1170, warping speed: 500m/min. 2) Warping machine Textima DS 42/30, year of construction: 1986, positions: 672, warping speed: 500m/min. 3) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. 4) Warping machine Textima DS 42/30, year of construction: 1986, positions: 1344, warping speed: 500m/min. 5) Warping machine Textima DS 42/30, year of manufacture: 1986, positions: 700, warping speed: 500m/min. 6) Textima DS 42/30 warping machine, year of manufacture: 1986, positions: 1216, warping speed: 500m/min. All warping machines were equipped with yarn monitoring devices, lint monitors or camera monitoring (CAM-SCAN and Protecha) and KFD brakes. 7) Warp knitting machine Textima Liba Excentra type 94, can be inspected on site.

Concrete Mixer

Pemat PMPR 750

Germany

2000

used

on request

INNO28366

A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.

CNC Milling Machine

Dmg Mori Ultrasonic 20 linear SAUER

Germany

2006

used

on request

INNO28364

A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible.

Welding Cell

Fanuc/wig ARC Mate 100iBe/WIG 300A

Germany

2006

used

on request

INNO28363

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

Injection Moulding Machine

Arburg 420 S 800-350

Germany

1998

used

on request

INNO28362

Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible.

CNC Welding Machine

Hürner WhiteLine CNC ECO 2.0 160

Germany

2018

used

on request

INNO28359

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

Double Sanding Stand

Germany

unknown

used

on request

INNO28358

A sanding block with two sanding wheels is available. Grinding wheel diameter: 450mm/60mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1200mm. On-site inspection is possible.

Universal Milling Machine

Deckel FP4A

Germany

unknown

used

on request

INNO28356

Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, spindle mount: SK40, speed: 2500rpm, feed: 630mm/min, rapid traverse: 1.3m/min, machine dimensions X/Y/Z: approx. 2300mm/1800mm/1800mm, weight: approx. 1750kg. Including numerous accessories such as new Allmatic HD 100 vice, 16x clamping tools, 3-jaw chuck, edge finder etc. Documentation available. On-site inspection is possible.