Used machines Germany - Innovac GmbH

Drying Chamber

Matair EF 50 E

Germany

2004

used

on request

INNO29112

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

more

Mandrel Bending Machine

Transfluid DB2060BK

Germany

2017

used

on request

INNO29111

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

more

Screw Conveyor

Rh

Germany

unknown

used

on request

INNO29110

A stainless steel screw conveyor is available. Shaft diameter: 115mm, spiral outer diameter: 350mm, pitch: 180mm, total length: 4200mm. On-site inspection is possible.

more

Part Washing Machine

Perkute Clean-o-mat RC 82

Germany

2002

used

on request

INNO29106

Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible.

more

Adhesive Application Machine

H & H (hardo) TH 1300-V60 PU BV

Germany

2018

used

on request

INNO29105

Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

more

Glueing Machine

Barberan MEN-H-1600

Germany

2017

used

on request

INNO29103

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

more

Cut-Off Saw

Berg & Schmid VKS 370 HA

Germany

2005

used

on request

INNO29096

Cutting range 90°: round material: 120mm, square material: 100mm/100mm, flat material: 180mm/100mm, cutting range 45° left: Round material: 120mm, square material: 100mm, flat material: 130mm/100mm, cutting range 60° left: Round material: 110mm, square material: 90mm/90mm, flat material: 90mm/100mm, cutting range 45° right: round material: 105mm, square material: 100mm/100mm, flat material: 130mm/100mm, motor power: 2.2kW, saw blade type: HSS 370, saw blade thickness: 3mm, saw blade width: 40mm, working height: 925mm, machine dimensions X/Y/Z: approx. 850mm/1100mm/2100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

more

Notching System

Peddinghaus Ocean Liberator/SACM-1250/A

Germany

2019

used

on request

INNO29095

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

more

Profile Projector

Mitutoyo/nikon PJ321F/V-12

Germany

unknown

used

on request

INNO29093

Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.

more

Table Trolley

Germany

unknown

used

on request

INNO29092

A total of 37 table trolleys are available. On-site viewing is possible.

more

Boxmaker

Solarco BMC 17 DCP

Germany

2008

used

on request

INNO29089

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

more

Lathe

Boehringer M 670 K

Germany

1970

used

on request

INNO29087

Rotation diameter over bed/plane slide: 690mm/415mm, center height: 335mm, spindle bore: 128mm, drive power: 22kW, speed: 1400rpm. Documentation available. On-site inspection is possible.

more

Screen Printing Machine

Kammann K15R (4.15.09)

Germany

1998

used

on request

INNO29086

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

more

Placement System

I-pulse (yamaha) M20

Germany

2012

used

on request

INNO29080

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

more

High-Bay Warehouse

Stopa

Germany

2005

used

on request

INNO29079

A Stopa heavy-duty high-bay racking system for panel storage is available. Total loading capacity: 51t, storage units: 17, max. storage unit load: 3t, max. panel dimensions X/Y: 1525mm/4050mm. Documentation available. On-site inspection is possible.

more

Servo Motor

Siemens Simotics M-1 PH8

Germany

unknown

used

on request

INNO29077

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

more

High-Bay Warehouse

Beewen Quickstore 7.1

Germany

2009

used

on request

INNO29073

A Beewen high-bay warehouse is available. The automation function is currently not available, but can be integrated after consultation with the manufacturer. Maximum product dimensions X/Y/Z: 600mm/400mm/325mm, max. stored goods weight: 30kg, system dimensions X/Y/Z: approx. 4500mm/5000mm/6000mm. Documentation available. On-site inspection is possible.

more

Servo Motor

Siemens Simotics M-1 PH8

Germany

unknown

used

on request

INNO29072

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

more

CNC Punch Laser Machine

Trumpf Trumatic 600L

Germany

1995

used

on request

INNO29071

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

more

Press Brake

Hämmerle AP 200x2600

Germany

1990

used

on request

INNO29070

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

more