Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1761 - 1780 of 2573]

Komora suszenia ciągłego

Finnrose/dustcontrol Fodo-3-1/DC/DT 5000/1300

Niemcy

1993

używany

na żądanie

INNO26878

There are 2 Finnrose/Dustcontrol drying channels available. 1) Finnrose A/S Fodo-3-1, year of manufacture: 1993. 2)Dustcontrol DC/DT 5000/1300, year of manufacture: 1984. Air capacity supply air/exhaust air: 1200/1200m³/h, power requirement supply air: 7.5kN ex, heating medium: 120-100°C, heat quantity: 66.2kW. Solvent vapor quantity/D max.: 140l/min, solvent quantity/C max. 480g/min. On-site inspection is possible.

Hydrauliczna wiertnica gąsienicowa

Klemm KR 802

Niemcy

2001

używany

na żądanie

INNO26876

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.

Rozdrabniacz

Zeno ZTLL 1400x1600

Niemcy

2010

używany

na żądanie

INNO26873

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

Wymiennik ciepła ze skrobakiem powierzchni

Gerstenberg Schröder FK01/120-1400

Niemcy

1989

używany

na żądanie

INNO26864

Max. Operating pressure: 20 bar, max. temperature range: 120°C.

Maszyna do układania palet

Weimer UPHS

Niemcy

1996

używany

na żądanie

INNO26862

A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible.

Sprężarka i osuszacz chłodniczy

Gea Grasso OS3

Niemcy

2007

używany

na żądanie

INNO26863

Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.

Kompletna linia do produkcji mozzarelli

Dima

Niemcy

2020

używany

na żądanie

INNO26852

A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets.

Sprężarka śrubowa

Atlas Copco GX5FF EP

Niemcy

2019

używany

na żądanie

INNO26851

There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available.

Piec retortowy

Xerion XRetort

Niemcy

2015

używany

na żądanie

INNO26848

There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible.

Przenośnik rolkowy

Niemcy

2016

używany

na żądanie

INNO26847

There are 2 pallet roller tracks available with separation and brake rollers at the end of the track. Format: pallets 1200mm/800mm, length: 4000mm, width: 1000mm.

Roboty

Kuka/abb KR/IRB

Niemcy

2014

używany

na żądanie

INNO26842

There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel.

Bonder do grubego drutu

Hesse Bondjet 939

Niemcy

2012

używany

na żądanie

INNO26845

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

Obsługa robotów

Arburg Multilift H m. B-Achse

Niemcy

2019

używany

na żądanie

INNO26826

Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available.

Maszyna do piaskowania

Peenmatic 1800 SDK

Niemcy

2000

używany

na żądanie

INNO26817

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

Wiertarko-frezarka

Hille/raboma/shw UE 21/SKM/BG 80

Niemcy

1959

używany

na żądanie

INNO26815

There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible.

Sprężarka śrubowa

Kaeser SK19

Niemcy

1997

używany

na żądanie

INNO26819

Power: 11kW, Voltage: 230/460Volt, 3-Phase, max. Operating Pressure: 10bar, Flow Rate: 1.5m³/min, max. Flow Rate: 1.92m³/min (68 CFM), Flow Rate at Max. Pressure: 1.27 m³/min (45CFM). Dimensions (Length/Width/Height): 812,8mm/762mm/1041,4mm

Nawijarka foliowa

Cyklop GL110/11

Niemcy

nieznany

używany

na żądanie

INNO26808

Diameter of the winding plate: 1500mm, height of the machine: 2500mm. Documentation available.

Ploter

Hp Designjet T520 ePrinter

Niemcy

2014

używany

na żądanie

INNO26809

Number of print cartridges: 4 (cyan, magenta, yellow, black), ink types: Dye-based (C, M, Y) and pigment-based (K), print quality max: 2400 x 1200 optimized dpi, minimum line width: 0.07mm, line precision: ±0.1%, max optical density (black): 8 L* min/2.10D. Documentation available.

Profilometr

Keyence VR-5200

Niemcy

2019

używany

na żądanie

INNO26798

Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.

Piła tarczowa

Eisele VMS-III-S

Niemcy

1991

używany

na żądanie

INNO26791

Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm.