Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1721 - 1740 of 2573]

Maszyna do cięcia laserowego

Bystronic ByVention 2,2kW

Niemcy

2008

używany

na żądanie

INNO27025

Laser type: CO2, laser power: 2.2kW, working range X/Y/Z: 1500mm/3000mm/100mm, max. material thickness: aluminum: 8mm, mild steel: 10mm, stainless steel: 6mm, max. workpiece weight: 890kg. Positioning speed X/Y: 100m/min, simultaneous positioning speed: 140m/min, total energy consumption: 37kW, max. sheet weight: 70kg/m². Dimensions X/Y/Z: 6000mm/6400mm/2150mm, weight: approx. 13500kg.

Linia hartownicza do profili

Elotherm Elomat V/M/180/3

Niemcy

nieznany

używany

na żądanie

INNO27020

A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils.

Centrum obróbcze CNC

Hommel Unverzagt UVA 725 Plus

Niemcy

2010

używany

na żądanie

INNO27008

Travel X/Y/Z: 725mm/460mm/460mm, speed: 10000rpm, tool holder: SK40, tool magazine: 24 places, max. tool diameter/length: 100mm/300mm, max. tool weight: 7kg, tool change time: 2s, table dimensions X/Y: 760mm/420mm, max. table load: 400kg. Dimensions X/Y/Z: approx. 2200mm/2100mm/2300mm, weight: approx. 3600kg, control: Heidenhain TNC 620. Defects: Compact inverter with integrated controller and PLC, door switch, both work area lamps, X-axis ball screw and roller bearings. Including chip conveyor. Documentation available. On-site inspection is possible.

Maszyna do lutowania na fali

Seho 2340-LRT

Niemcy

2005

używany

na żądanie

INNO27015

The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible.

Wózek wysokiego składowania

Still ESM 10 NiHo-Mast

Niemcy

2015

używany

na żądanie

INNO27001

Lifting mast: NiHo mast/duplex, lifting height: 3520mm, mast height extended/retracted: 2178mm, 4063mm, free lift: 1633mm, fork tine dimensions X/Y/Z: 1150mm/80mm/612mm. Nominal load capacity: 1000kg, load center: 600mm, battery capacity: approx. 440Ah, battery weight: 385kg. Dimensions X/Y/Z (without tines): approx. 1250mm/800mm/2200mm, unladen weight: approx. 1700kg. Documentation available.

Prasa hydrauliczna

Wanzke HVZ 160/S

Niemcy

1998

używany

na żądanie

INNO26995

Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.

Maszyna do owijania pakietów

Sema

Niemcy

2006

używany

na żądanie

INNO26990

A Sema wrap-around packer for Tetra Rex soft packs is available. Output: single pack: 6000/h, 6-pack tray: 1000/h & 3.6s/tray, 10-pack tray: 600/h & 6s/tray. Documentation available. On-site inspection is possible.

Maszyna do pęcherzyków powietrza

Fromm AP502

Niemcy

2010

używany

na żądanie

INNO26999

Film width: 420mm, max. film roll diameter: 280mm, connected load: 2kVA, length: 1600mm, width: 767mm, height: 1292mm, weight: 228kg.

System spieniania PUR

Hennecke HK135

Niemcy

2005

używany

na żądanie

INNO26994

A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible.

Pakowarka do butelek

Sema Setzpackanlage

Niemcy

2018

używany

na żądanie

INNO26991

A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6/12, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection is possible.

Drukarka atramentowa ciągła

Linx 4900

Niemcy

2007

używany

na żądanie

INNO26980

Maximum print speed: 375m/min, print heights min/max: 2mm/7.62mm, number of print lines: 1-3 lines, print materials: almost all surfaces, ink system: sealed print head system. Documentation available.

Waga wielogłowicowa

Mbp C2 SERIES

Niemcy

2021

używany

na żądanie

INNO24903

Operational hours counter: ca. 50h, with documentation and conveyor, without spare parts.

Maszyna do mielenia mięsa

Mado MEW 620

Niemcy

nieznany

używany

na żądanie

INNO26977

Filling opening diameter: 98mm, material: stainless steel, max. output: 1400kg/h, perforated disk: 3mm, dimensions X/Y/Z: approx. 1000mm/850mm/1400mm, weight: approx. 300 kg.

Linia okleinująca

Ima Combima

Niemcy

1996

używany

na żądanie

INNO26973

An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available.

Maszyna do makaronu

Bralyx Big Plus 10.0 MK

Niemcy

2015

używany

na żądanie

INNO26976

A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available.

Oczyszczalnia ścieków

Agw Chargenbehandlung

Niemcy

2004

używany

na żądanie

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

Wózek wysokiego składowania

Jungenheinrich EJC Z14

Niemcy

2009

używany

na żądanie

INNO26971

Fork dimensions X/Y/Z: approx. 1140mm/185mm/50mm, max. lifting height: approx. 4090mm, fork spacing: approx. 190mm, max. load capacity: 1400kg, drive: electric, weight: approx. 1100kg, battery weight: approx. 240kg, dimensions X/Y/Z: approx. 2000mm/840mm/1820mm. Defective battery.

Centrum obróbcze z oknem kątowym

Weinig Unicontrol 10

Niemcy

1998

używany

na żądanie

INNO26960

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

System mieszania

Grieser

Niemcy

2018

używany

na żądanie

INNO26963

A vacuum butterfly mixer with container is available. Mixer: lifting height: 650mm, butterfly agitator inserts: 3, butterfly speed: 72-720rpm, scraper arm speed: 17rpm, control: Siemens Sinatic HMI, dimensions X/Y/Z: approx. 1360mm/2650mm/2450mm, weight: approx. 2400kg. Tank: mixing chamber volume: 100l, mixing chamber pressure: 0bar-1bar, heating/cooling chamber volume: 13l, heating/cooling chamber pressure: 3bar, tank jacket operating temperature min./max.: 15°C/150°C, max. bearing and seal operating temperature: 130°C.

Kabina do malowania proszkowego

Gema StandardClassic

Niemcy

2015

używany

na żądanie

INNO26948

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.