Maszyny Uzywane Niemcy - Innovac GmbH

Maszyna CNC do erodowania drutu

Matra-fanuc TAPE-CUT-W1

Niemcy

nieznany

używany

na żądanie

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

więcej

Maszyna do owijania taśmą

Sander M.j. Maillis TZ/4

Niemcy

2003

używany

na żądanie

INNO27937

Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.

więcej

Szlifierka powierzchniowa

Ziersch Gmbh ZT 820

Niemcy

2008

używany

na żądanie

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

więcej

Maszyna do puszek

Eray Auto Lid UTM 10.B

Niemcy

2010

używany

na żądanie

INNO27922

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

więcej

Prasa hydrauliczna

Lauffer RPT 68

Niemcy

1987

używany

na żądanie

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

więcej

Nożyce gilotynowe

Georg Eckart

Niemcy

1990

używany

na żądanie

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Heller MCH 250

Niemcy

2006

używany

na żądanie

INNO27911

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025.

więcej

Etykieciarka

E-packaging Saturno

Niemcy

2020

używany

na żądanie

INNO27910

A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible.

więcej

Kipp- und Sortieranlage

Skako/ventzki 50D/NEE 511-111-S

Niemcy

2013

używany

na żądanie

INNO27909

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

więcej

Waporyzator na sucho

Pp-tec 3000M

Niemcy

2023

używany

na żądanie

INNO27907

Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.

więcej

Zbiornik gazu płynnego

Kadatec

Niemcy

2022

używany

na żądanie

INNO27906

Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.

więcej

Maszyna do gięcia żelaza

Mep Macchine Elettroniche Piegatrici System N

Niemcy

1997

używany

na żądanie

INNO27902

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

więcej

System cięcia płomieniowego

Esab SUPRAREX SXE-P (D)

Niemcy

1999

używany

na żądanie

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.

więcej

Frezarka stołowa

Casadei FM5C

Niemcy

1994

używany

na żądanie

INNO27889

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

więcej

Pilarka tarczowa

Avola GAMA 75R

Niemcy

2001

używany

na żądanie

INNO27888

Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible.

więcej

Precyzyjna piła tarczowa

Maka KS 3000

Niemcy

2000

używany

na żądanie

INNO27887

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

więcej

Elektryczny wózek widłowy wysokiego składowania

Jungheinrich ETV 10

Niemcy

1993

używany

na żądanie

INNO27886

Max. load capacity: 1t, specific body: cross seat, battery voltage: 24V/460Ah, lift height: 4550mm, overall height: 2190mm, mast type: triplex, attachment: sideshift, fork length: 1200mm, operating hours: 2753h. Converted to electric power steering, including external battery charger, on-site inspection is possible.

więcej

Marker laserowy CO2

Domino D 320i

Niemcy

2020

używany

na żądanie

INNO27882

Suitable for marking cans, speed: 1500 characters/s, line speed: 400m/min, operating system: Windows CE, marking field: 58x58-452x572mm, throughput: 150 pieces/min, wavelength: 10.6µm, can diameter: 99/127/153mm, can height: 123-216mm, length: 776mm, width: 140mm, height: 140mm, weight: 22kg. The device is still in its original packaging, with documentation, an on-site inspection is possible.

więcej

Drukarka atramentowa do małych znaków

Rea Jet REA-JET CIJ SC2.0

Niemcy

nieznany

używany

na żądanie

INNO27873

Suitable for foils, laminates, plastics, metals, cardboard, glass, vertical resolution: 48 pixels, connected load: 100VA, weight: 20kg, on-site inspection is possible.

więcej

Spawarka

Heberle/hbs/lorch/mig O Mat/castolin+eutectic cd System 2010/SEW 200N/MIG O MAT WIGSTAR 250i

Niemcy

nieznany

używany

na żądanie

INNO27872

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

więcej