Używane maszyny z Niemiec - Strona 8

Prasa krawędziowa CNC

Prima Power EP-0520 / EP-BRAKE

Niemcy

2012

używany

na żądanie

INNO32593

Operating voltage: 3×400V, frequency: 50Hz. Machine is fully functional. Inspection possible by arrangement.

więcej

Okleiniarka

Homag KAL211 Edition 2262

Niemcy

2012

używany

na żądanie

INNO32592

Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement.

więcej

Frezarka portalowa

Belotti MDL 12036

Niemcy

2007

używany

na żądanie

INNO32591

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

więcej

Rozdrabniacz

Lindner Jupiter 3200

Niemcy

2010

używany

na żądanie

INNO32590

A shredder with control cabinet, three spare motors and discharge conveyor is available: 1) Lindner Jupiter 3200 shredder, dimensions: 6500x2500x3200mm, weight: 36t, operating hours: 58545h, with hopper, operator panel and hydraulic power unit. 2) Control cabinet for Jupiter 3200, dimensions: 3000x2000x600mm, weight: 980kg, with frequency converter, water cooling units and recooling unit. 3) Spare motor ABB M3BP 315LKA 6, power: 160kW, speed: 994rpm, IE3, dimensions: 1200x800x600mm, weight: 1.41t, is unused. 4) 2x spare motor Schorch 315L IMB3, power: 160kW, speed: 988rpm, dimensions: 1200x800x600mm, weight: 1.3t. 5) Inclined conveyor FC H101 1200/9200, dimensions: 9200x1500x1800mm, weight: 1.7t. The machine was regularly serviced by the manufacturer. During annual rotor maintenance, the rotor was fully hardfaced. The track was retensioned every three months. New motors with energy efficiency class IE3 were installed in 2021. The foreign object flap was replaced in 2024. Two couplings were replaced in 2024. The machine is operational. An on-site inspection is possible. The machine is not connected to the power supply.

więcej

Wytłaczarka dwuślimakowa

Coperion/ Werner & Pfleiderer ZSK 58 Mc

Niemcy

1999

używany

na żądanie

INNO32589

A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible.

więcej

Prasa dwukolumnowa hydrauliczna

Müller ZEO 100-10.3.1

Niemcy

1987

używany

na żądanie

INNO32588

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

więcej

Suwnica pomostowa

Abus

Niemcy

1998

używany

na żądanie

INNO32587

Load capacity: 3200kg. Inspection possible by appointment.

więcej

Automat do polerowania krawędzi

C.m.g. Macchine Flotter 57/33

Niemcy

2015

używany

na żądanie

INNO32586

End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment.

więcej

Szpulownica

Ssm PW3-W

Niemcy

2013

używany

na żądanie

INNO32585

Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment.

więcej

Sprężarka śrubowa

Kaeser SK 26

Niemcy

2005

używany

na żądanie

INNO32584

A complete compressed air system is available, consisting of a screw compressor, refrigerated compressed air dryer, Kaeser FF-138D filter housing, E-F-138 filter and compressed air tank, 1) Kaeser SK 26 SIGMA screw compressor, rated power: 15kW, length: 750mm, width: 905mm, height: 1245mm, weight: 320kg, 2) Kaeser TE 121 refrigerated compressed air dryer, refrigerant: R134a, max. refrigerant operating pressure: 18bar, max. air operating pressure: 16bar, length: 1060mm, width: 1520mm, height: 1513mm, 3) Kaeser FF-138D filter housing, with E-F-138 filter, 4) OKS compressed air tank, tank capacity: 2,000l, operating pressure: 0-11bar, test pressure (PT): 16bar, operating temperature: -10 to +50°C, with CE marking CE 0044, an on-site inspection is possible.

więcej

Tokarka centralna

Fritz Kern Kg D560

Niemcy

nieznany

używany

na żądanie

INNO32583

Swing diameter over bed: 560mm, swing diameter over cross slide: 320mm, spindle speed: 900rpm, machine has surface rust, not operational, an on-site inspection is possible, not connected to power.

więcej

Szlifierka powierzchniowa

Aba FF 600

Niemcy

1959

używany

na żądanie

INNO32582

Operating voltage: 380V, connected load: 3.05kW, weight: 1.1t, an on-site inspection is possible.

więcej

Tokarka

Colchester Chipmaster

Niemcy

nieznany

używany

na żądanie

INNO32581

Including accessories. Inspection possible by prior arrangement.

więcej

Maszyna do owijania folią termokurczliwą

Vacuumpump A.üp.a TU120_200i

Niemcy

2011

używany

na żądanie

INNO32580

Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment.

więcej

Szlifierki do wałków

Ribon RUR 500

Niemcy

1973

używany

na żądanie

INNO32579

Rated voltage: 380V AC, rated power: 2.4kW, rated current: 12A, components: grinding wheelhead, workpiece headstock, internal grinding attachment, machine bed, longitudinal slide, coolant system, collection tray, pneumatic system, swiveling grinding head, grinding wheel guard, metal protective covers. An on-site inspection is possible.

więcej

Szlifierka powierzchniowa

Elb SWBE 08 NPC-K

Niemcy

1988

używany

na żądanie

INNO32578

Operating voltage: 3x 380V, frequency: 50Hz, rated current: 40A, fuse protection: 50A, control voltage: 220V, DC voltage: 215/323V, an on-site inspection is possible.

więcej

Uniwersalna frezarko-wiertarka CNC

Maho MH 800

Niemcy

1997

używany

na żądanie

INNO32577

Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.

więcej

Uniwersalna frezarka CNC do produkcji i narzędziowni

Berthold Hermle Gmbh UWF 851

Niemcy

1989

używany

na żądanie

INNO32576

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

więcej

Uniwersalna frezarka CNC do produkcji i narzędziowni

Berthold Hermle Gmbh UWF 1001

Niemcy

1989

używany

na żądanie

INNO32575

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

więcej

Półautomatyczna linia do klejenia i prasowania

Pro Tec 20006

Niemcy

2020

używany

na żądanie

INNO32574

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible.

więcej