Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [161 - 180 of 3094]

Automatyczna giętarka do drutu CNC

Numalliance Macsoft FX10

Niemcy

2005

używany

na żądanie

INNO32245

A Numalliance CNC wire bending machine for the production of 2D and 3D wire-formed parts is offered. Axes: 7, wire diameter range: 3mm-10mm, control: CNC. Weight: approx. 4100kg, dimensions X/Y/Z: approx. 7900mm/3700mm/2000mm. Documentation available. The machine has been shut down since 2025. An on-site inspection is possible.

Planetarny silnik odśrodkowy

Dreher FT4 20/VT

Niemcy

1993

używany

na żądanie

INNO32244

Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible.

Prasa hydrauliczna

Smg VZP 100-1000/850

Niemcy

1959

używany

na żądanie

INNO32243

The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible.

Urządzenie do spawania kątowego

Tbs Pack WSG-4555

Niemcy

2011

używany

na żądanie

INNO32242

Welding frame dimensions: 450x550mm, applicable films: POF/ PP/ PE/ PVC, max. film thickness: 50μm, weight: approx. 150kg, with Nero shrink tunnel system TBS PACK STA-3528 and documentation. On-site inspection is possible.

Prasa ekscentryczna

Eth3

Niemcy

nieznany

używany

na żądanie

INNO32241

Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible.

Pakiet maszyn do szycia

Pfaff 1183/563/134/463

Niemcy

nieznany

używany

na żądanie

INNO32240

Seven Pfaff industrial sewing machines are available. 1) 2 × Pfaff 1183 industrial sewing machines, one with drive and one without drive, stitch type: lockstitch 301, needle system: DBx1/134R, needle size: 60Nm-90Nm, max. stitch length: 4.5mm, max. sewing speed: 5500stitches/min, needle bar stroke: 32mm/36mm, presser foot clearance: 9mm-13mm, working space X/Y: 260mm/125mm, sewing head dimensions X/Y/Z: approx. 550mm/180mm/300mm, sewing head weight: approx. 30kg. 2) Pfaff 563 industrial sewing machine with drive, stitch type: lockstitch 301, max. sewing speed: 5500stitches/min, max. stitch length: 3.5mm/4.5mm, needle system: 134, needle size: 60Nm-100Nm, needle bar stroke: 33mm, balance wheel diameter: 65mm. 3) Pfaff 134 industrial sewing machine without drive, single-needle flatbed version with horizontal rotary hook, needle system: 134, working space X/Y: 295mm/140mm, max. sewing speed: approx. 3150stitches/min, forward and reverse sewing possible. 4) 3 × Pfaff 463 industrial sewing machines. In total, five machines with drive and two machines without drive are available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Battenfeld TM 4500/3300

Niemcy

2004

używany

na żądanie

INNO32239

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

Tokarka cykliczna CNC

Pinacho Smart Turn 6/225

Niemcy

2008

używany

na żądanie

INNO32238

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Roboty

Nachi MZ12

Niemcy

2020

używany

na żądanie

INNO32237

Axes: 6, payload: approx. 12kg, reach: approx. 1454mm. The robot has already been professionally dismantled and is currently in storage. On-site inspection is possible.

Linia do obróbki wiórowej

Linck V30 / DVN 55 / V25 / VPP 34 / VS 66

Niemcy

nieznany

używany

na żądanie

INNO32236

A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible.

System spieniania PUR

Sunstar Engineering FOAMPLY T 1K Schaumanlage

Niemcy

2021

używany

na żądanie

INNO32235

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

Parownik sufitowy

Güntner DHN 051C/27

Niemcy

nieznany

używany

na żądanie

INNO32234

Two identical ceiling evaporators are available, max. operating pressure: 28bar, max. operating temperature: 100°C, capacity: 29l, rated capacity at t=8°C: 18.9kW, rated capacity at t=7°C: 15.3kW, surface area: 101.9m², air flow rate: 11,240m³/h, air throw: 2x14m, inlet connection: 22mm, outlet connection: 54mm, defrost capacity (electric): 7,200W, length: 2,480mm, width: 1,565mm, height: 450mm, fan type: VT0139, fan diameter: 500mm, fan speed: 1,380/min, power per fan: 500W, current per fan: 1.05A, sound level: 78dB(A), number of fans: 2. An on-site inspection is possible, the units are not connected to power.

Frezarka uniwersalna CNC

Hermle U 1000 S

Niemcy

2000

używany

na żądanie

INNO32233

X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible.

Maszyna do polerowania CNC

Loh SPS 50 SL

Niemcy

2002

używany

na żądanie

INNO32232

Working range: 5mm-50mm, max. tool spindle speed: 25000rpm, geometries: spheres/aspheres, operating modes: manual/automatic, collision avoidance and precision via integrated center thickness measurement, control: CNC. Machine dimensions X/Y/Z: approx. 700mm/1350mm/1950mm, weight: approx. 850kg. Documentation available. Inspection possible by arrangement.

Piec do lutowania reflow

Ersa Hotflow 3/20

Niemcy

2012

używany

na żądanie

INNO32230

Two identical reflow soldering ovens with different years of manufacture (2008/2012) are offered. Working width: 45mm-516mm, clear passage height top/bottom: 35mm/37mm, max. conveyor speed: 2m/min, drive: pin chain conveyor, heated/cooled process zone: 3725mm/1115mm, heating cassettes: 20, control: PLC. Machine dimensions X/Y/Z: approx. 6265mm/1201mm/1375mm, weight: approx. 1900kg. Inspection possible by arrangement.

Podnośnik roboczy z przyczepą

Genie TZ-34/20

Niemcy

2011

używany

na żądanie

INNO32229

An articulated aerial work platform in need of repair is offered. Working height: 12200mm, platform height: 10300mm, horizontal outreach: 5590mm, platform capacity: 200kg, platform for 2 persons, transport length: approx. 5000mm, transport width: approx. 1470mm, transport height: approx. 2010mm, permissible gross weight: 1454kg. A hydraulic valve is defective, a replacement part is available but has not yet been installed, therefore the outriggers are currently secured with straps. An on-site inspection is possible.

Maszyna etykietująca

Altech ALbelt

Niemcy

2018

używany

na żądanie

INNO32227

An automatic Altech labeling machine for labeling bags/pouches is offered. Conveyor belt width: 200mm, conveyor belt length: 1500mm, conveyor belt height: 1000mm +/-50mm, max. label width: 100mm, labeling: from above, max. dispensing speed: 30m/min, max. label roll diameter: 300mm, positioning accuracy: +/-1mm. Equipped with a stepper motor-driven label applicator, optical product detection, adjustable side guides, customized pressure rollers, counter and continuously variable conveyor speed with digital frequency inverter. Documentation available. An on-site inspection is possible.

Urządzenie do pomiaru fal

Ibb Technology PREMION M 318-1408-1200

Niemcy

2018

używany

na żądanie

INNO32226

A manual shaft measuring device for measuring shafts and rotationally symmetrical workpieces and for determining various form, position, length and diameter parameters is offered. Measuring length: 1200mm, max. workpiece diameter: 200mm, max. workpiece weight: 50kg, measuring method: manual, software: PREMION measuring software, operating system: Windows 11. Equipment: PC with monitors, keyboard and mouse, manual length and diameter module, centering tips and additional measuring accessories, PC replaced and equipped with Windows 11. Weight: 250kg. An on-site inspection is possible.

Maszyna do pakowania w folię

Pfankuch VP6503

Niemcy

2002

używany

na żądanie

INNO32225

An automatic Pfankuch collating and OPP film wrapping machine for flat products is offered. Max. film roll width: 600mm, max. film roll diameter: 250mm, film core diameter: 76mm, film thickness range: 15µm-40µm, max. production output: 100packs/min, product-dependent, top film material: polypropylene OPP/COEX/Cast, bottom film: polypropylene OPP/COEX. Dimensions: approx. 6000mm/1000mm. Documentation available. Inspection possible by arrangement.

Uniwersalny system do wędzenia i gotowania

Bastra Bastramat Smoke 150

Niemcy

1984

używany

na żądanie

INNO32224

Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible.