Maszyny Uzywane Niemcy - Innovac GmbH

Maszyna do cięcia z laserem

Trumpf TRUMATIC L4030

Niemcy

1999

używany

na żądanie

INNO31500

Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.

więcej

Laser płytowy

Trumpf trudisk 6002

Niemcy

2007

używany

na żądanie

INNO31499

Offered is a high-performance solid-state disk laser. Laser power: 6000W, beam quality: 8mm mrad, wavelength: 1030nm, laser diode rated power: 29kW, control: TRUMPF LaserControl S. Equipped with internal heat exchanger, Grundfos pressure pump CRI10, integrated safety circuit, 2-phase fiber optic connection box. Weight: approx. 2000kg, overall dimensions X/Y/Z: approx. 1750mm/850mm/1370mm. Inspection possible by arrangement.

więcej

Współrzędnościowa maszyna pomiarowa

Carl Zeiss WMM 850

Niemcy

1986

używany

na żądanie

INNO31498

Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement.

więcej

Poziome centrum obróbcze

Toyoda Mitsui FA630S

Niemcy

2008

używany

na żądanie

INNO31497

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

więcej

Poziome centrum obróbcze

Toyoda Mitsui FH550SX

Niemcy

2005

używany

na żądanie

INNO31496

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.

więcej

Instalacja do cięcia laserowego rur

Blm Group LT 8

Niemcy

2011

używany

na żądanie

INNO31495

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

więcej

5-Osiowa szlifierka do narzędzi CNC

Walter Ag Helitronic Power

Niemcy

1995

używany

na żądanie

INNO31494

Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible.

więcej

Tokarka jednowrzecionowa automatyczna

Index B60

Niemcy

nieznany

używany

na żądanie

INNO31493

A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.

więcej

Instalacja do testowania filtrów

Lorenz FMP 04

Niemcy

2021

używany

na żądanie

INNO31492

An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example.

więcej

Tokarka CNC

Index GE65

Niemcy

1994

używany

na żądanie

INNO31491

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

więcej

Frezarka uniwersalna

Index SV4

Niemcy

nieznany

używany

na żądanie

INNO31490

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

więcej

Termoformierka

Gabler M92L

Niemcy

2007

używany

na żądanie

INNO25234

Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.

więcej

Gilotyna szybkotnąca

Baumann Perfecta 115

Niemcy

2022

używany

na żądanie

INNO31489

There is a Baumann Perfecta 115 high-speed cutter with Baumann Perfecta BSB 3L jogger, Schneider SENATOR unloader and Schneider SENATOR pile hoist available. 1) Baumann Perfecta 115 high-speed cutter, working height: 900mm, cutting width: 1150mm, insertion depth: 1150mm, max. layer height: 165mm, residual cut: 20mm, residual cut without cover plate: 77mm, weight: 3.2t, year of manufacture: 2022, 2) Baumann Perfecta BSB 3L jogger, load capacity: 1500N, connected load: 2.5kVA, year of manufacture: 2022, 3) Schneider SENATOR unloader, load capacity: 1t, lifting height: 900mm, year of manufacture: 1990, 4) Schneider SENATOR pile hoist, year of manufacture: 2022. An on-site inspection is possible.

więcej

Tokarka CNC

Traub TND 400

Niemcy

1995

używany

na żądanie

INNO31488

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

więcej

Frezarka pionowa

Bernhard Steinel SV 4g

Niemcy

1969

używany

na żądanie

INNO31487

Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement.

więcej

Maszyna do formowania wtryskowego

Sumitomo Demag EL-EXIS S 300/720-1450

Niemcy

2009

używany

na żądanie

INNO31486

Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible.

więcej

Frezarka pozioma

Fritz Werner HF 1.6

Niemcy

1977

używany

na żądanie

INNO31485

Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement.

więcej

Maszyna do formowania wtryskowego

Sumitomo Demag EL EXIS S 200/560-840

Niemcy

2009

używany

na żądanie

INNO31484

Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available.

więcej

Rozdrabniacz surowców wtórnych

Vecoplan VAZ 2000 M F-T

Niemcy

2007

używany

na żądanie

INNO24262

The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment.

więcej

Jednowrzecionowe automaty tokarskie sterowane krzywką

Index C 29

Niemcy

nieznany

używany

na żądanie

INNO31483

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

więcej