Używane maszyny z Niemiec - Strona 6

Moduł zasilania wodą kotłową

Loos FTC 3

Niemcy

2009

używany

na żądanie

INNO32633

Total volume: 3,000l, max. allowable pressure: 0.5bar, test pressure: 2bar, max. temperature: 110°C, including flash tank, cooler and two boiler feedwater pumps, operated with demineralized water. An on-site inspection is possible.

więcej

Giętarka trójwalcowa

Roundo Ab PS 360

Niemcy

nieznany

używany

na żądanie

INNO32632

Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement.

więcej

Maszyna do cięcia plazmowego CNC

Saf OXYTOME 40

Niemcy

nieznany

używany

na żądanie

INNO32631

Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement.

więcej

Giętarka trójwalcowa

Roundo Ab PSS 550

Niemcy

nieznany

używany

na żądanie

INNO32630

Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement.

więcej

Tokarka centralna

Saro SNA 710x3000

Niemcy

1982

używany

na żądanie

INNO32629

Offered for sale is a conventional center lathe with lead screw and feed rod. Distance between centers: 3000mm. Swing over bed: 710mm. Center height: 342mm. Spindle speed range: 8-1250rpm. Number of spindle speed steps: 23. Longitudinal feed: 0.056-10mm/rev. Cross feed: 0.028-5mm/rev. Metric thread pitches: 1-176mm. Max. workpiece weight between centers: 2500kg. Max. workpiece weight between centers with steady rest: 3000kg. Tailstock quill travel: 300mm. Equipped with digital readout, three-jaw chuck, four-way tool post and tailstock. Weight: approx. 5400kg. Overall dimensions X/Y/Z: approx. 5325mm/1510mm/1510mm. Inspection possible by arrangement.

więcej

Wentylator

Wmb Ventilatoren Gmbh RVM3 U 355 MB2-11GR360 Ex Zone 2

Niemcy

2011

używany

na żądanie

INNO32628

Three identical fans are available, volume flow rate: 2.22m³/s, conveyed medium temperature (reference): 20°C, max. conveyed medium temperature: 80°C, reference density at 20°C: 1.2kg/m³, total pressure rise: 3591Pa, static pressure rise: 3289Pa, fan speed: 2960rpm, fan absorbed power: 9.69kW, rated motor power: 11kW, motor speed: 3000rpm, rated motor current: 20.50A, motor voltage: 400/690V, power factor (cos φ): 0.87. An on-site inspection is possible, but only when de-energized.

więcej

Tokarka centralna

Ponar-wrocław TUR 630 M

Niemcy

1986

używany

na żądanie

INNO32627

Offered for sale: Conventional center lathe with lead screw and feed rod. Distance between centers: 1500mm. Swing over bed: 630mm. Spindle speed range: 18-1800rpm. Number of spindle speeds: 21. Spindle bore: 90mm. Bed width: 433mm. Longitudinal feed: 0.08-3.26mm/rev. Cross feed: 0.04-1.63mm/rev. Equipped with digital readout, lathe chuck, four-way tool post and tailstock. Weight: approx. 3300kg. Overall dimensions X/Y/Z: approx. 3400mm/1420mm/1645mm. Inspection possible by arrangement.

więcej

Regał przepływowy

Galler Omega

Niemcy

nieznany

używany

na żądanie

INNO32626

Offered for sale is a pallet flow racking system with four storage levels, consisting of two rack blocks. Pallet load for Euro pallets: 200-850kg incl. pallet. Technical data: Max. load height incl. pallet: 1620mm. Number of storage levels: 4. Incline of the flow lanes: 4%. Width: 7500mm. Rack depth per block: 16290mm. Outer upright height: 7451mm. Equipped with pallet flow lanes, wheel stop rails and rack impact protection. Inspection possible by arrangement.

więcej

Myjka do butelek

Klinger Flaschenwaschsysteme Business Class 14/1/453

Niemcy

nieznany

używany

na żądanie

INNO32625

Offered for sale is an industrial bottle washing machine with a multi-stage cleaning system. Rated capacity: 2000bottles/h. Bottle volume: 0.2-1.0liters. Bottle diameter: 58-88mm. Bottle height: 140-330mm. Total bottle rows: 61. Bottles in the machine: 770 units. Cycle time: 19.3846sec. Total transit time: 19.71min. Caustic contact time: 11.95min. Max. water consumption: 1.0m³/h. Equipped with bottle infeed and discharge, weak caustic bath, multi-stage spray systems for caustic solution, hot, warm and fresh water, and label discharge. Empty weight: approx. 6500kg. Overall dimensions X/Y/Z: approx. 5050mm/3139mm/2450mm. Height including spindles: 2600mm. Inspection possible by arrangement.

więcej

Sprężarka śrubowa

Atlas Copco GA11+ FF

Niemcy

2017

używany

na żądanie

INNO32624

Offered for sale is a rotary screw compressor with an integrated refrigerant dryer. Volume flow rate: 1.82m³/min, operating pressure: 9.75bar. Controller: Atlas Copco Elektronikon Graphic with display. Equipped with an integrated refrigerant dryer (FF version) and emergency stop switch. Inspection possible by arrangement.

więcej

Termostat cyrkulacyjny chłodzący

Peter Huber Kältemaschinenbau Polystat K6 / CC2

Niemcy

nieznany

używany

na żądanie

INNO32623

Offered for sale are 2 refrigerated heating circulators with digital temperature control. Unit 1: Temperature range: -25 to +150°C. Refrigeration system operation: up to max. +80°C. Unit 2: Temperature range: -25 to +200°C, refrigerant charge: 0.07kg. Maximum pressure: 17bar. Control system: Digital CC2 temperature controller with display and control buttons. Equipped with a stainless steel bath, circulation and cooling unit, and connecting lines. Inspection possible by arrangement.

więcej

System oczyszczania wody ultraczystej

Millipore Milli-Q Academic

Niemcy

nieznany

używany

na żądanie

INNO32622

Offered for sale is a laboratory ultrapure water system with digital controls. Control system: Digital control panel with LCD display and function keys. Equipped with a handheld water dispenser, flexible coiled hose and side-mounted filter cartridge. Inspection possible by arrangement.

więcej

Suszarka do żeli laboratoryjnych

Scie-plas GD4534

Niemcy

nieznany

używany

na żądanie

INNO32621

Offered for sale is a laboratory gel dryer with digital temperature control. Maximum power consumption: 800W. Digital temperature controller with °C display. Equipped with a heated drying surface, separate timers for the heating element and vacuum pump, and an indicator light for the heating element. Inspection possible by arrangement.

więcej

System oczyszczania wody ultraczystej

Thermo Scientific GenPure Standard with xCAD

Niemcy

2012

używany

na żądanie

INNO32620

Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement.

więcej

Nośnik form

Kannegiesser MLFT 8,5x12,5/8

Niemcy

nieznany

używany

na żądanie

INNO32619

Offered for sale is a hydraulic mold carrier for mounting and operating molds in polyurethane processing. Equipment: Hydraulic actuation, upper and lower mold mounting platens, column guidance. Inspection possible by arrangement.

więcej

Autoklaw do barwienia

Icymsa ATU 3000

Niemcy

nieznany

używany

na żądanie

INNO32618

Capacity: 2800l, vessel diameter: 1350mm. Documentation available. Inspection possible by prior arrangement.

więcej

Suszarka UV

Lc UV4000

Niemcy

nieznany

używany

na żądanie

INNO32617

Pass-through width: 320mm, max. conveyor speed:20m/min, UV lamp power: 4kW, generator power: 5kW. machine dimensions X/Y/Z: approx. 2650mm/800mm/1750mm, weight: approx. 350kg.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei 800-5700 MC

Niemcy

1999

używany

na żądanie

INNO32616

Clamping force: 8,000kN, operating voltage: 400V, mains frequency: 50Hz, power supply: three-phase AC, 3 phases, total rated current: 400A, max. motor current: 205A, upstream fuse protection: 2x200A, an on-site inspection is possible.

więcej

Drukarka Inkjet

Linx 8910

Niemcy

2018

używany

na żądanie

INNO32615

Two identical inkjet printers are available, printhead: Mk11 Midi, nozzle size: 62µm, supported print lines: 1, 2 or 3, character height: 1.8-20mm, max. printing speed for 1 line, 5-pixel character height: 6.25m/s (0.47mm dot spacing), 1 line, 7-pixel character height: 4.89m/s (0.55mm dot spacing), 2 lines, 7-pixel character height: 2.09m/s (0.37mm dot spacing), 3 lines, 7-pixel character height: 1.01m/s (0.37mm dot spacing), max. characters per second: 2,222, recommended printhead distance from product: 12mm, printhead distance for carton coding: 35mm, printhead length: 223mm, printhead diameter: 42mm, housing material: stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating temperature with Linx 1240 ink: 0-50°C, max. relative humidity: 90%, power supply: 100-230V AC, rated power: 150W, upper length: 440mm, lower length: 400mm, width: 355mm, height: 503mm, weight including fluids and printhead: 24kg, an on-site inspection is possible.

więcej

System pakowania i paletyzacji

Votech VLR-400-N

Niemcy

2024

używany

na żądanie

INNO32614

Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible.

więcej