Maszyny Uzywane Niemcy - Innovac GmbH

Spawarka ramowa

Mla M 12

Niemcy

2006

używany

na żądanie

INNO27761

Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.

więcej

Dmuchawa

Claudius Peters GMB15.11

Niemcy

1980

używany

na żądanie

INNO27760

Two identical Claudius Peters industrial blowers are available. Power: 97.2kW, speed: 1680rpm, flow rate: 58.2m³/min, pressure: 1bar, secondary pressure: 0.8bar, pressure difference: 800mbar. On-site inspection is possible.

więcej

Wieża chłodnicza

Karlsruhe (gohl-ktk) K 18-28-3

Niemcy

2002

używany

na żądanie

INNO27759

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

więcej

Ciągarnia drutu

Koch KHZ 6300

Niemcy

1992

używany

na żądanie

INNO27758

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible.

więcej

System spawania dźwigarów kratowych

Evg TSD 7-25

Niemcy

1992

używany

na żądanie

INNO27757

Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.

więcej

System spawania dźwigarów kratowych

Evg TSD 7-25

Niemcy

1993

używany

na żądanie

INNO27756

Carrier type: KT8, carrier height: 90mm-250mm, upper belt diameter: 5mm-12mm, upper belt surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower belt diameter: 4mm-10mm, lower belt surface: smooth/ribbed, max. carrier length: 14000mm, cutting grid: 100/200mm, run-off plate: 5. Stacker SVH included. Documentation available. On-site inspection is possible.

więcej

System spawania dźwigarów kratowych

Filzmoser GH300/70

Niemcy

1994

używany

na żądanie

INNO27755

Beam type: KT8, beam height: 60mm-300mm, upper beam diameter: 5mm-12mm, upper beam surface: smooth/ribbed, diagonal diameter: 4mm-7mm, diagonal surface: smooth, lower beam diameter: 5mm-12mm, lower beam surface: smooth/ribbed, max. beam length: 14600mm, cutting grid: 100/200mm. Documentation available. On-site inspection is possible.

więcej

System spawania dźwigarów kratowych

Filzmoser GH73/ST

Niemcy

1994

używany

na żądanie

INNO27754

Beam type: KTS, beam height: 80mm-300mm, upper beam diameter: 5mm, upper beam surface: smooth/ribbed, diagonal diameter: 7mm, diagonal surface: smooth, lower beam diameter: 5mm, lower beam surface: smooth/ribbed, max. beam length: 14000mm, cutting grid: 200mm. Documentation available. On-site inspection is possible.

więcej

Rozdrabniacz

Rapid 8045-KU

Niemcy

1994

używany

na żądanie

INNO27751

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

więcej

Cela spawalnicza robota

Reis TYPRV20-16-RSVI

Niemcy

2015

używany

na żądanie

INNO27746

Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei KM 250-1400 C1

Niemcy

2002

używany

na żądanie

INNO27744

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

więcej

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

więcej

Szlifierka do powierzchni CNC

Stöckel FNX 850 Z NC-T

Niemcy

2020

używany

na żądanie

INNO27736

A CNC profile and surface grinding machine Stöckel is available. Travel X/Y/Z: 850mm/680mm/475mm, guide X/Y/Z: sliding guide/linear guide/linear guide, table dimensions X/Y: 800mm/500mm, table feed: 30m/min, drive X/Y/Z: Toothed belt/ball screw/ball screw, feed: Y/Z: 2000mm/min, fine adjustment X/Y/Z: from 0.001mm, speed: 4000rpm, spindle taper: 60mm, spindle power: 11kW, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2300mm, weight: approx. 4300kg, operating hours: 16156h, control: NC-T. Documentation available. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Michael Deckel S20 Turbo

Niemcy

2011

używany

na żądanie

INNO27729

Travel X/Y/Z: 340mm/240mm/240mm, max. workpiece diameter: 250mm, max. workpiece length: 500mm, speed: 3000rpm, spindle power: 7kW, machine dimensions X/Y/Z: approx. 1800mm/2000mm/2200mm, weight: approx. 2200kg, control: PMAC. Including 6-fold grinding wheel changer, chain loader S20 E for 41 workpieces and filter system Indusa ELN 1000 NS, year of manufacture: 2022. Documentation available. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Schütte WU 305

Niemcy

2005

używany

na żądanie

INNO27728

Axes: 5, sanding length: 330mm, max. workpiece diameter: 235mm, travel X/Y/Z: 400mm/250mm/250mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/1900mm, weight: approx. 2800kg, control: Siemens Sinumerik 840D, operating hours: approx. 22000h. Documentation available. An on-site inspection is possible.

więcej

Zakład destylacji

Stilmas FA 1000 HR/SA

Niemcy

2002

używany

na żądanie

INNO27722

A Stilmas distillation plant for the production of water for injection (WFI) is available. Production capacity 25°C/85°C: 500l/h / 1000l/h, max. temperature: 144°C. Documentation available. On-site inspection is possible.

więcej

Generator czystej pary

Stilmas PSG 1500 DTS

Niemcy

2002

używany

na żądanie

INNO27721

Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Shw UFZ 6L

Niemcy

1990

używany

na żądanie

INNO27719

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

więcej

Generator trójfazowy z silnikiem Diesla

Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230

Niemcy

2024

używany

na żądanie

INNO27715

A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.

więcej

Maszyna CNC do cięcia wzdłużnego i nawijania

Euromac TB-3.06iS

Niemcy

2013

używany

na żądanie

INNO27712

Working width: 1200mm, max. nut roll diameter: 1000mm, max. end roll diameter: 600mm, max. roll weight: 1500kg, min. roll width: 300mm, web tension: 50N-400N/axis, core inner diameter unwind/rewind: 152mm/76mm, speed: 500m/min, max. cuts: 32, products: painted aluminum: 25µm-70µm, aluminum laminates: 40g-150g/m², embossed aluminum: 105µm-160µm, underbridge space: 2000mm. Machine dimensions X/Y/Z: approx. 5731mm/5710mm/2652mm, control: Siemens PLC 7, operating hours: 5736h. Including spare lower knife shaft, sets of spacer rings, circular knives on sleeves including spare circular knives, hard-coated aluminum deflection rollers, rubberized smooth contact rollers, an optical positioning aid with spotlights, a handling trolley, a manually movable unloading frame, a mending table on the unwinder as well as area protection by floor scanner and a hood. Documentation available. On-site inspection is possible.

więcej