Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1441 - 1460 of 2591]

System klimatyzacji i wentylacji

Wolf WK-101

Niemcy

2008

używany

na żądanie

INNO27871

A Wolf air conditioning and ventilation system, consisting of a supply air unit, an extract air unit and a heater, is available. 1) Wolf WK-101 supply air unit, nominal volume flow: 8500m³/h or 2.36m³/s, total/exact delivery pressure: 675Pa/250Pa, fan efficiency: 75.3%, fan speed: 2131rpm, fan power: 2.4kW, differential pressure: 1861Pa, motor power: 3kW, motor speed: 1420rpm. 2) Wolf WK-101 exhaust air unit, nominal volume flow: 8500m³/h or 2.36m³/s, number of filters: 4, filter class: F5, filter type: Biost. Pocket filter TK F5 PVC, initial pressure difference: 69Pa, final pressure difference: 200Pa. 3) Wolf WK-101 heater, nominal volume flow: 8500m³/h or 2.36m³/s, nominal heat output: 51.4kW, air inlet and air outlet temperature: -14°C/4°C, heating medium: water-glycol, flow temperature: 12.8°C, return temperature: 0.7°C, medium flow rate: 4240l/h, glycol content: 30%, max. operating temperature: 120°C, pressure difference air/water: 0Pa/29.5Pa. On-site inspection is possible.

Maszyna do owijania taśmą

Humboldt Verpackungstechnik HS 560

Niemcy

2006

używany

na żądanie

INNO27870

Strapping capacity: 28/h, strap width: 12mm, strap tension: 100N-3500N, frame dimensions X/Y: 800mm/800mm, working height: 810mm, machine dimensions X/Y/Z: 1430mm/620mm/1540mm. On-site inspection is possible.

Maszyna do owijania taśmą

Cyklop CI SOY

Niemcy

1993

używany

na żądanie

INNO27869

Strap width range: 9mm-12mm, strapping capacity: 35rpm, max. package width: 600mm, max. package height: 1200mm, strap tension range: 7kg-70kg. On-site inspection is possible.

Piła tarczowa

Eisele VMSII PV PROD

Niemcy

1982

używany

na żądanie

INNO27868

Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 527 GS

Niemcy

1993

używany

na żądanie

INNO27866

Web width min./max.: 214mm/686mm, max. roll diameter: 1500mm, production output: 1000 covers/min. The machine is not equipped with peel-and-seal, but only with wet gumming. Including printing unit 2+1. The machine can cut and punch envelopes with windows. Documentation available. On-site inspection is possible.

Szlifierka szerokotaśmowa

Boere ELITE 1650 BM TB

Niemcy

2013

używany

na żądanie

INNO27865

Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible.

Frezarka uniwersalna CNC

Kunzmann WF 4/3

Niemcy

2001

używany

na żądanie

INNO27864

X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Charmilles Robofil 310

Niemcy

nieznany

używany

na żądanie

INNO27862

Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible.

Piła tarczowa

Eisele VMSII-033

Niemcy

1982

używany

na żądanie

INNO27859

Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.

Frezarka narzędziowa

Ipte FUS-32

Niemcy

nieznany

używany

na żądanie

INNO27858

Travel X/Y/Z: 560mm/320mm/400mm, speed: 3600rpm, tool holder: SK40, power: 3kW, table dimensions X/Y: 450mm/950mm, weight: approx. 1650kg. Including various accessories. On-site inspection is possible.

Cobot

Hanwha Techwin HCR-5

Niemcy

2019

używany

na żądanie

INNO27857

A Hanwha Techwin collaborative robot is available. Axes: 6, reach: 915mm, payload: 5kg, repeatability: +/-0.1mm, collision detection: 25Nm-150Nm, weight: 21kg. Including platform (dimensions X/Y/Z: 780mm/700mm/910mm), suction pad, control unit and original packaging. Documentation available. On-site inspection is possible.

Lakiernia

Rippert/maxon/weishaupt

Niemcy

2011

używany

na żądanie

INNO27855

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

Maszyna do wałkowania ciasta

Seewer/rondo Doge STC1 A0

Niemcy

2002

używany

na żądanie

INNO27853

Application: bread and pastry products, belt length: 1250mm, belt width: 610mm, dough thickness range: 0mm-35mm, dough weight range: 200g-2400g. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Deckel Maho DMC 100 V

Niemcy

nieznany

używany

na żądanie

INNO27851

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible.

Współrzędnościowa maszyna pomiarowa

Keyence XM-1500

Niemcy

2018

używany

na żądanie

INNO27850

Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible.

Maszyna do powlekania walców

Hymmen TLX M

Niemcy

1990

używany

na żądanie

INNO27844

A roller coating machine specially designed for UV coating in the wood industry is available. Working width: 1350mm, max. workpiece thickness: 80mm, working height: approx. 980mm, application roller: 1350mm, feed speed: 5m-25m/min, machine dimensions X/Y/Z: approx. 2700mm/1200mm/1800mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Maszyna do powlekania rolkowego

Bürkle DAL2 1300

Niemcy

1991

używany

na żądanie

INNO27843

Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.

Zwijak

Wanzke PM 1000/DC-S / PMS500-DC

Niemcy

1995

używany

na żądanie

INNO27840

Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible.

Szlifierka do otworów

Jung C8

Niemcy

1969

używany

na żądanie

INNO27838

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

Maszyna pomiarowa multisensorowa

Mahr MarVision MS662

Niemcy

nieznany

używany

na żądanie

INNO27836

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.