Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1501 - 1520 of 2524]

Linia okleinująca

Ima Combima

Niemcy

1996

używany

na żądanie

INNO26973

An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available.

Maszyna do makaronu

Bralyx Big Plus 10.0 MK

Niemcy

2015

używany

na żądanie

INNO26976

A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available.

Oczyszczalnia ścieków

Agw Chargenbehandlung

Niemcy

2004

używany

na żądanie

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

Wózek wysokiego składowania

Jungenheinrich EJC Z14

Niemcy

2009

używany

na żądanie

INNO26971

Fork dimensions X/Y/Z: approx. 1140mm/185mm/50mm, max. lifting height: approx. 4090mm, fork spacing: approx. 190mm, max. load capacity: 1400kg, drive: electric, weight: approx. 1100kg, battery weight: approx. 240kg, dimensions X/Y/Z: approx. 2000mm/840mm/1820mm. Defective battery.

Centrum obróbcze z oknem kątowym

Weinig Unicontrol 10

Niemcy

1998

używany

na żądanie

INNO26960

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

System mieszania

Grieser

Niemcy

2018

używany

na żądanie

INNO26963

A vacuum butterfly mixer with container is available. Mixer: lifting height: 650mm, butterfly agitator inserts: 3, butterfly speed: 72-720rpm, scraper arm speed: 17rpm, control: Siemens Sinatic HMI, dimensions X/Y/Z: approx. 1360mm/2650mm/2450mm, weight: approx. 2400kg. Tank: mixing chamber volume: 100l, mixing chamber pressure: 0bar-1bar, heating/cooling chamber volume: 13l, heating/cooling chamber pressure: 3bar, tank jacket operating temperature min./max.: 15°C/150°C, max. bearing and seal operating temperature: 130°C.

Kabina do malowania proszkowego

Gema StandardClassic

Niemcy

2015

używany

na żądanie

INNO26948

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.

Maszyna do druku kopert

Winkler + Dünnebier 26 FF

Niemcy

nieznany

używany

na żądanie

INNO26954

A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible.

Obkurczarka kapturowa

Tbs-pack HSM-320

Niemcy

nieznany

używany

na żądanie

INNO26959

Semi-tubular films: POF/PP/PE/PVC, max. film thickness: 50µm, max. product dimensions: 440mm/300mm/200mm, max. roll diameter/length: 250mm/400mm, output: 6/min. Welding frame dimensions X/Y: 320mm/460mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

Półautomatyczna maszyna do wiązania taśmą

Linstrap LS320

Niemcy

2009

używany

na żądanie

INNO26958

A semi-automatic strapping machine with a transport box is available. Strap width: 9mm-15mm, max. strap tension: 70kg, power: 30rpm, working height: 820mm-920mm (adjustable). Dimensions X/Y/Z: 1200mm/600mm/1540mm, weight: 110kg. Including transport box. On-site inspection is possible.

Maszyna tampodrukowa

Tampoprint TS90/TS80

Niemcy

2007

używany

na żądanie

INNO26949

There are 2 TampoPrint pad printing machines available. 1) TampoPrint TSQ90, year of manufacture: 2007, printing force: 3000N, cliché size: 50x150mm-150x550mm, pad stroke: 40mm-110mm, squeegee strokes: 150mm, cycles per hour: 600-2000, dimensions X/Y/Z: 1200mm/1600mm/600mm, weight: approx. 240kg. Documentation available. 2) TampoPrint TT/TS 80/100/41. printing force: 1200N, cliché size: 100x250mm, pad stroke: 50mm-100mm, cycles per hour: 1500-2000, dimensions X/Y/Z: 1200mm/1600mm/600, weight: 200kg.

Maszyna do druku kopert

Winkler + Dünnebier 627 GS

Niemcy

nieznany

używany

na żądanie

INNO26952

Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible.

Prasa hydrauliczna

Dunkes HZS 125

Niemcy

2000

używany

na żądanie

INNO26947

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

Frezarka CNC

Makino FNC-A20

Niemcy

1985

używany

na żądanie

INNO26937

Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible.

Frezarka uniwersalna

Shw UF 2

Niemcy

nieznany

używany

na żądanie

INNO26939

Travel X/Y/Z: 650mm/442mm/442mm, speed: 2170rpm, feed: 254mm/min, milling table clamping surface X/Y: 1080mm/400mm, number of clamping grooves: 5, quill stroke: 100mm, ram stroke: 100mm, swivel range in the milling table: +/-30°, swivel range milling ram device: +/-180°. Dimensions X/Y/Z: 1700mm/1800mm/1850mm, weight: approx. 3200kg. Documentation available.

System mieszania

Jiangsu Xinda SHR-800

Niemcy

2009

używany

na żądanie

INNO26921

Capacity: 800l, power: 110kW, mixing chamber material: stainless steel, speed: 475rpm, dimensions X/Y/Z: 2800mm/1800mm/2500mm, weight: approx. 3600kg.

Maszyna do druku kopert

Winkler + Dünnebier 249

Niemcy

1991

używany

na żądanie

INNO26924

Envelopes (wallet): min.: 127mm/150mm, max.: 255mm/420mm, pockets: Center seam: min.: 228mm/127mm, max. 420mm/305mm, Side seam: min.: 228mm/127mm, max.: 420mm/262mm. Speed: 500 pockets/min, paper weight: 80g/m²-150g/m².

Maszyna do druku kopert

Winkler + Dünnebier 102

Niemcy

1993

używany

na żądanie

INNO26923

Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 5+0 or 4+1 Doctor Blade, ink tanks: 4x Inkcan, ink pump: 4x Pneumatic, window unit: traditional punching knives and adhesive paper. Includes Top and bottom scriber, time lubrication unit, latex and dextrin sealing, infrared drying, electronic counter and monitoring.

Tokarka wielowrzecionowa

Mori-say 6/32M

Niemcy

1997

używany

na żądanie

INNO26918

A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg.

Tokarka CNC

Takamaz X180

Niemcy

2010

używany

na żądanie

INNO26917

One CNC lathe Takamaz X180 available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg.