Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1241 - 1260 of 2654]

Fork Lift

Mitsubishi FG20NT

Germany

2019

used

on request

INNO28782

Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible.

Semi Automatic Strapping Machine

Mosca MOM-8

Germany

unknown

used

on request

INNO28781

Several Mosca strapping machines are available. Table dimensions X/Y: 980mm/540mm, working height: 820mm/900mm, strapping: polypropylene (PP), strap width: 5mm/8mm/12mm, strap thickness: 0.4mm/0.8mm, strap coil core diameter: 200mm, core width: 190mm, weight: approx. 120kg. Documentation available. On-site inspection is possible.

Refrigerant Dryer

Kaeser TB 26

Germany

2007

used

on request

INNO28780

Air volume flow: 2.55m³/min, pressure dew point: 3°C, operating pressure: 16bar, refrigerant: R134a, refrigerant capacity: 670g. Documentation available. On-site inspection is possible.

CO2 Laser Cutting Machine

Amada LC-2415 Alpha II/Resonator C-1500

Germany

1998

used

on request

INNO28779

Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Stork N-2500-1400

Germany

2005

used

on request

INNO28778

Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 520C 2000-675

Germany

1998

used

on request

INNO28776

Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

CNC Universal Milling Machine

Maho MH 1000 C

Germany

1984

used

on request

INNO28775

A Maho CNC universal tool milling machine is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, speed: 2000rpm, feed: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. An on-site inspection is possible.

Retracting Belt

Verbufa

Germany

unknown

used

on request

INNO28774

A VSB Verbufa for the positioning of minced meat, hamburgers, cookies, balls and sticks with high cycle output in packaging and packaging machines is available. Output: 110 portions/min, machine dimensions X/Y/Z: approx. 1700mm/950mm/1650mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Buffer Stand

Intray Smart Buffer

Germany

unknown

used

on request

INNO28772

A Smart Buffer Stand (destacker) Intray for tray packaging is available. Tray dimensions X/Y: 325mm/265mm, max. tray stack height: 500mm, lifting fittings: 4, belt width: 500mm, machine width: 770mm. Documentation available. On-site inspection is possible.

Cutting Table

Asco PS 50

Germany

2010

used

on request

INNO28770

Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. On-site inspection is possible.

Smelting Furnace

Rauch ZSO 700 B

Germany

1995

used

on request

INNO28768

A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Screen Printing Machine

Svecia SPC

Germany

1987

used

on request

INNO28764

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.

CNC Machining Center

Enshu WE30Ve

Germany

unknown

used

on request

INNO28763

Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 650mm/400mm, max. table load: 350kg, spindle mount: BT30, speed: 12000rpm, power: 5.5kW, torque: 82.7Nm. Rapid traverse: 50m/min, feed: 50m/min, tool positions: 21, tool diameter: 75mm, tool length: 210mm, tool weight: 3kg. Machine dimensions X/Y/Z: approx. 2550mm/1450mm/2900mm, control: Fanuc 0iMF. Documentation available. On-site inspection is possible.

CNC Machining Center

Enshu Je30S

Germany

unknown

used

on request

INNO28762

Travel X/Y/Z: 500mm/350mm/300mm, table dimensions X/Y: 320mm/320mm, max. table load: 450kg, speed: 13000rpm, spindle power: 5.5kW, spindle mount: HSK40, tool positions: 24, max. tool diameter: 75mm, max. tool length: 200mm, max. tool weight: 3kg, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 4200mm/1250mm/2450mm, weight: 4400kg, control: Fanuc Series 21i-MB. Documentation available. On-site inspection is possible.

CNC Machining Center

Kitamura MyCenter HX3000iG

Germany

2018

used

on request

INNO28761

Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible.

CNC Vertical Machining Center

Deckel Maho DMC 835 V

Germany

2006

used

on request

INNO28758

Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible.

CNC Machining Center

Deckel Maho DMC 105 V Linear

Germany

2008

used

on request

INNO28757

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.

CNC Machining Center

Deckel Maho DMC 105 V Linear

Germany

2006

used

on request

INNO28756

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.

Welding Cell

Kuka/akon/dinse KR 6 R900/Dix PI 900

Germany

unknown

used

on request

INNO28753

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

CNC Machining Center

Wagner-eumach EBM 3200

Germany

2009

used

on request

INNO28752

Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich.