Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1221 - 1240 of 2601]

CNC Oxygen Cutting Machine

Messer Cutting MultiTherm Eco 3600

Germany

2021

used

on request

INNO28160

Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.

Robot Assembly System

Hbi Robotics/ Kuka

Germany

2018

used

on request

INNO28158

With feed system and Leibinger JET3up small character inkjet printer, has been little used. On-site inspection is possible.

Cleaning Machine

Silberhorn Multijet S3

Germany

2018

used

on request

INNO28156

Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.

Weight Per Unit Area Measuring System

Scantech HF3 XT10

Germany

2022

used

on request

INNO28151

A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.

Molding Press

Italpresse BG 800

Germany

1994

used

on request

INNO28149

Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.

CNC Tool Milling Machine

Deckel Maho DMF 220 linear

Germany

unknown

used

on request

INNO28147

A 5-axis CNC tool milling machine DMG Mori is available. Travel X/Y/Z: 2200mm/560mm/720mm, B-axis: +/-100°, speed: 1800rpm, tool holder: SK40, power at 40%: 35kW, rapid traverse X/Y/Z: 100m/min / 50m/min / 50m/min, feed: 50m/min, table dimensions X/Y: 2600mm/600mm, max. table load: 2200kg, control: Siemens 840D powerline with ShopMill.Table load: 2200kg, control: Siemens 840D powerline with ShopMill. The motor spindle, the Y-axis linear guide and the storage bladder of the machine were replaced in 06/2024.

Compressor

Atlas Copco SF8

Germany

2004

used

on request

INNO28146

An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.

Vertical Bag Forming, Filling and Sealing Machine

Bosch SVB 2501 A/SVB 3601 L

Germany

1996

used

on request

INNO28135

Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.

CNC Machining Center

Dmg Mori NHX 4000

Germany

2017

used

on request

INNO28134

Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible.

Continuous Inkjet Printer

Videojet Ink Jet 1580

Germany

unknown

used

on request

INNO28132

Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

Office Container

Germany

unknown

used

on request

INNO28129

An office container is available. Internal length: 4600mm, internal width: 2900mm, area: 13.35m². An on-site inspection is possible.

Upright Drilling Machine

Donau Alpha

Germany

2010

used

on request

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

CNC Press Brake

Coastone Cone 1600

Germany

unknown

used

on request

INNO28127

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Welding Rotating Device

Reinartz Thieler 300 R

Germany

unknown

used

on request

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Surface Grinding Machine

Proth PSGS-3060AH

Germany

1987

used

on request

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Band Saw

Jaespa MSP-4

Germany

1990

used

on request

INNO28124

A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

CNC Circular Grinding Machine

Gp CNC 650

Germany

2012

used

on request

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Eccentric Press

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Germany

1988

used

on request

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Single-Shaft Shredder

Gross GAZ 62

Germany

2011

used

on request

INNO28119

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

Aluminum Wet Separator

Beck Alu-Waschboy BE-AL-F1

Germany

2023

used

on request

INNO28116

A mobile wet extraction system Beck for the extraction and filtration of aluminum dusts and other explosive dusts is available. Suction capacity: 1600m³/h, pressure: 2500Pa, suction nozzle diameter: 200mm, motor power: 1.85kW, fan type: BN 30/28 Ex, machine dimensions X/Y/Z: approx. 1050mm/1000mm/2250mm, weight: approx. 210kg. Documentation available. On-site inspection is possible.