Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1201 - 1220 of 2596]

Turret Lathe

Froriep KE-Super

Germany

1955

used

on request

INNO28182

A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible.

Cutting Plotter

Aristo Aristomat 2032 GL

Germany

2003

used

on request

INNO28181

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

Screw Cap Machine

Alwid/bausch & Ströbel/müller K94073

Germany

2004

used

on request

INNO28180

Two manual capping machines and a pressure container are available. 1) Alwid capping machine, year of manufacture: 2004, operating pressure: 6bar-8bar, bottle height range: 81mm-257mm. 2) Bausch & Ströbel screwing machine, operating pressure: 4bar-6bar. 3) Müller K94073 pressure tank, year of manufacture: 2004, volume: 100l. On-site inspection is possible.

Filling Machine

Viscotec ViscoFill 3000L

Germany

2001

used

on request

INNO28178

A ViscoTec volumetric filling machine for filling and dosing low to high viscosity products is available. Filling quantity range: 50ml-20000ml, filling capacity: 25l/min, product contact materials: stainless steel 1.4571, machine dimensions X/Y/Z: approx. 1550mm/550mm/750mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Shrink Wrapper

Smipack S440

Germany

1999

used

on request

INNO28177

Sealing frame dimensions X/Y: 440mm/300mm, max. product height: 210mm, max. film width: 500mm, max. roll diameter: 300mm, packaging capacity: 300/h, connected load: 2.3kW. Machine dimensions X/Y/Z: approx. 1300mm/650mm/1100mm, weight: approx. 125kg. Documentation available. On-site inspection is possible.

Inline Machine

Dy Machinery FPS-120Gold Inliner

Germany

2009

used

on request

INNO28176

A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025.

Milk Clarifier

Gea Westfalia MSA 90-01-076

Germany

1981

used

on request

INNO28175

A GEA clarifier (skimmer) is available. Bowl speed: 5920 rpm, material density: 1.1 kg/dm³, production capacity: approx. 10000 l/h, motor power: approx. 18 kW, construction material: stainless steel 316, documentation available. On-site inspection is possible.

Transformer

Elin TDQ-632A01S5H-19

Germany

2001

used

on request

INNO28174

Rated power: 630kVA, type: Lithium, power St1/St2/St3: 10400V/10000V/9600V, cooling type: ONAN, rated current: 36.35A, short circuit: 4.24%, max. short circuit duration: 2s, insulating fluid: Technol 2002, max. oil temperature: 95°C, max. oil weight: 335kg, machine weight: 1865kg. Documentation available. On-site inspection is possible.

Transformer

Bub S5841B

Germany

1984

used

on request

INNO28173

Rated power: 630kVA, Type: Lithium, Operating mode: Continuous operation, Power St1/St2/St3: 10400V/10000V/9600V, Cooling type: ONAN, Rated current: 36.4A, Short circuit: 4.2%, Max. short circuit duration: 2s, Machine weight: 1680kg, Oil weight: 340kg. Documentation available. On-site inspection is possible.

Radial Drilling Machine

Mas VO 32

Germany

1992

used

on request

INNO28172

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg Allrounder 420C 1000-100/370S 700-100

Germany

2010

used

on request

INNO28171

There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible.

Linear Robot

Krauss Maffei LR 300

Germany

2008

used

on request

INNO28170

A Krauss Maffei linear device (handling) for injection molding machines is available. Travel X/Y/Z: 1500mm/2500mm/4000mm, load capacity: 30kg, vacuum: 4x, compressed air: 3x, weight: approx. 650kg, operating hours: 69100h. The Y-axis is slightly skewed. Documentation available. On-site inspection is possible.

Column-Mounted Slewing Crane

Evers AS20-3,0

Germany

2018

used

on request

INNO28168

Load capacity: 2000kg, reach: 3000mm, pre-buffer diameter: 1310mm, swivel range: 270°/180°. Documentation available. On-site inspection is possible.

Pneumatic Press

Mäder XL-DA 5600-80-300

Germany

2018

used

on request

INNO28166

A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible.

Sawmill

Söderhamn Eriksson

Germany

2008

used

on request

INNO28165

A sawmill with integrated log handling and sorting from Söderhamn Eriksson for the production of sawn timber is available. Production capacity: approx. 70000m³-100000m³ per shift, timber thickness range: 150mm-660mm. The log handling and sorting components include the log feeder, a root run-in cutter, a material thickness measurement system for calculating the volume of wood in cubic meters, a cross-cut saw, a metal detector, 13 log storage boxes, an HDS gripper, a debarker, a bark chipper and a fully automatic conveyor system. The components of the sawmill line include a debarking machine, a prism saw, a 4-belt band saw, a 3-belt band saw, a timber edging saw, a board sorting system with 22 pockets, a board stacking system and infeed and outfeed conveyors. Including various accessories such as rolling machine saw belt, sharpening machine saw belt, compressors, rollers, band saws, sawdust discharge and wood hall. The machine has not been used for eight years. Documentation available. On-site inspection is possible.

CNC Oxygen Cutting Machine

Messer Cutting MultiTherm Eco 3600

Germany

2021

used

on request

INNO28160

Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.

Robot Assembly System

Hbi Robotics/ Kuka

Germany

2018

used

on request

INNO28158

With feed system and Leibinger JET3up small character inkjet printer, has been little used. On-site inspection is possible.

Cleaning Machine

Silberhorn Multijet S3

Germany

2018

used

on request

INNO28156

Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.

Weight Per Unit Area Measuring System

Scantech HF3 XT10

Germany

2022

used

on request

INNO28151

A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.

Molding Press

Italpresse BG 800

Germany

1994

used

on request

INNO28149

Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.