Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
Innovac used-machines Latest Offers  [1261 - 1280 of 2789]
Rotary-Transfer-Machine-Eubama-S20-10 used
Rotary Transfer Machine
Eubama S20/10
Germany
unknown
used
on request
INNO29660
Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible.
more
Punch-Riveting-Tool-Böllhoff-SZ-26-50-50-30 used
Punch Riveting Tool
Böllhoff SZ-26-50-50-30
Germany
unknown
used
on request
INNO29645
A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.
more
Elevator-Büter-Säulenheber-GEH-20-80 used
Elevator
Büter Säulenheber GEH 20-80
Germany
2022
used
on request
INNO29640
An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible.
more
Slip-Grinding-Machine-Rösler-R-550-4600-DA used
Slip Grinding Machine
Rösler R 550/4600 DA
Germany
1995
used
on request
INNO29634
A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.
more
Induction-Oven-Itg-ITPA-50K200+10K100 used
Induction Oven
Itg ITPA 50K200+10K100
Germany
2006
used
on request
INNO29632
An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.
more
Bogie-Hearth-Furnace-Nabertherm-W-1000-A used
Bogie Hearth Furnace
Nabertherm W 1000/A
Germany
1999
used
on request
INNO29630
Volume: 1000l, max. temperature: 750°C, heating capacity: 40kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1900mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Expected to be available from October/November 2025.
more
Injection-Moulding-Machine-Krauss-Maffei-KM-50-KM-125 used
Injection Moulding Machine
Krauss Maffei KM 50/KM 125
Germany
2000
used
on request
INNO29626
Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.
more
Rotary-Transfer-Machine-Mikron-Multistar-LX-24 used
Rotary Transfer Machine
Mikron Multistar LX-24
Germany
1994
used
on request
INNO29625
Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible.
more
Emergency-Generator-Elin-sgp-S2506-S12 used
Emergency Generator
Elin/sgp S2506/S12
Germany
unknown
used
on request
INNO29624
An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible.
more
T-Connector-Machine-Ruchser-RU-TMV-6 used
T-Connector Machine
Ruchser RU TMV 6
Germany
1998
used
on request
INNO29623
A T-connector assembly fixture Ruchser for precise and time-saving installation of T-connectors in window or door profiles is available. Usable length: 6000mm, max. mullion width: 250mm, profile supports: 6, clamps: 4, positioning stops: 4, working height range: 950mm-1100mm, machine dimensions X/Y/Z: approx. 6450mm/1200mm/1750mm. Documentation available. An on-site inspection is possible.
more
Universal-Tool-Milling-Machine-Wilhelm-Grupp-UF-20 used
Universal Tool Milling Machine
Wilhelm Grupp UF 20
Germany
1981
used
on request
INNO29622
Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.
more
Surface-Grinding-Machine-Matra-MF-6A used
Surface Grinding Machine
Matra MF 6A
Germany
1973
used
on request
INNO29621
Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.
more
Cylindrical-Grinding-Machine-Kellenberger-S11 used
Cylindrical Grinding Machine
Kellenberger S11
Germany
unknown
used
on request
INNO29620
An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible.
more
CNC-Universal-Milling-and-Drilling-Machine-Hermle-UWF-1001-H used
CNC Universal Milling and Drilling Machine
Hermle UWF 1001 H
Germany
1994
used
on request
INNO29619
A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.
more
CNC-Vision-Measuring-System-Mitutoyo-QS-250Z used
CNC Vision Measuring System
Mitutoyo QS-250Z
Germany
2001
used
on request
INNO29618
A CNC image processing and measuring device Mitutoyo is available. Travel X/Y/Z: 200mm/250mm/100mm, accuracy: 5µm, resolution: 0.5µm, travel speed: 80mm/s, acceleration: 250mm/s², glass table dimensions X/Y: 269mm/311mm, max. workpiece weight: 10kg, weight: approx. 70kg, control: QSPAK Version 3.1. Documentation available. An on-site inspection is possible.
more
Sheet-Metal-Shear-Schuler-St-0,75x780 used
Sheet Metal Shear
Schuler St 0,75x780
Germany
1955
used
on request
INNO29613
Sheet thickness iron: 0.75mm, sheet thickness steel: 0.5mm, working width: 780mm, stroke rate: 135/min. An on-site inspection is possible.
more
Punching-Machine-Illig-ZSM-90 used
Punching Machine
Illig ZSM 90
Germany
1969
used
on request
INNO29612
A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.
more
Cut-Off-Saw-Pressta-Eisele-GS-600 used
Cut-Off Saw
Pressta Eisele GS 600
Germany
2023
used
on request
INNO29610
An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.
more
Optical-Inspection-System-Bizerba-Prosecure-L-Pro used
Optical Inspection System
Bizerba Prosecure L Pro
Germany
2018
used
on request
INNO29609
An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.
more
Heating-Unit-Kleindienst-3-294-3-174-3-1194 used
Heating Unit
Kleindienst 3-294/3-174/3-1194
Germany
1994
used
on request
INNO29607
Three heating units Kleindienst are available. 1) Kleindienst 3-294, year of manufacture: 1994, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar, connected load: 4.9kW. 2) Kleindienst 3-174, year of manufacture: 1992, heating: D, max. operating temperature: 206°C, operating pressure: 8bar–17bar. 3) Kleindienst 3-1194, year of manufacture: 1994, connected load: 0.1kW. An on-site inspection is possible.
more
Innovac Gebrauchtmaschinen Our Program
Agricultural-machines 2
Automation-technology 57
Beverage-filling-technology 39
Complete-production-lines 1
Construction-machinery 27
Energy-management 134
Food-processing-and-beverage 159
Material-storage 61
Materials-handling-technology 70
Measurement-and-testing 80
Medical-equipment 9
Metal-processing-machines 1084
Mining 5
Office-equipment 3
Other-machines 62
Packaging-machines 245
Pharmaceutical-and-cosmetics 15
Plastics-processing-machines 178
Printing-machines 69
Process-equipment-and-chemistry 172
Packaging-material-machinery 87
Robotics 35
Surplus-goods 5
Textile-machinery 88
Utility-vehicles 9
Woodworking-machines 93