Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1281 - 1300 of 2604]

Lathe

Wmw DLZ 630 IV x2000

Germany

1983

used

on request

INNO28026

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Clamp Jaw Elevator

Gronemeyer

Germany

unknown

used

on request

INNO28022

A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past.

CNC Tool Grinding Machine

Smp Numaffut CA6

Germany

2001

used

on request

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

Pick-And-Place Machine

Mechatronika M10V

Germany

2013

used

on request

INNO28008

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

UV Dryer

Esc special

Germany

2005

used

on request

INNO28007

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Engel

Germany

2009

used

on request

INNO28006

There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible.

Slitting and Winding System

Calator/weiss/bastian SEM-SRE

Germany

1988

used

on request

INNO28005

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Mobile Crane

Demag LK 910/483-V

Germany

1972

used

on request

INNO27996

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

Electric Pedestrian Forklift Truck

Genkinger EGG 20/31 I

Germany

2019

used

on request

INNO27994

Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.

Remaining Stock Assembly Line

Rna/sortimat/asba/intec/maximator/tox/videojet/bihler Model 1510/DUO-5-PN-K/BB50/ET180

Germany

unknown

used

on request

INNO27993

After the closure of an assembly line, various accessories, spare parts and individual small used machines are available. 30+ drives for RNA, Sortimat, ASBA, OKU and Lanco reversible conveyors. 6x Intec BB50 belt hoppers. 4x hydraulic units Maximator and Hawe. 4x Schling Duo-5-PN-K toggle presses. 5x TOX EL 15.30 power packs. 8x linear conveyors with swing arm and left-hand grid. 4x Bihler ET 130.0.G-1000/4 welding transformers. 6x VideoJet Model 1510 inkjet printers. Documentation available. On-site inspection is possible.

Pallet Wrapping Machine

Geho Basicstretch 1500

Germany

2013

used

on request

INNO27988

Film carriage: 2x manual via belt, column height: 2260mm, max. loading height including pallet: 2300mm, turntable diameter: 1500mm, turntable load capacity: 1500kg, turntable speed: 13.5rpm, turntable height: 76mm. Machine dimensions X/Y: 2600mm/1500mm, weight: approx. 330kg. Documentation available. On-site inspection is possible.

Cross Belt Grinding Machine

Linden Machines B.v. MC/QB-900

Germany

1990

used

on request

INNO27986

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Bulldozer

Liebherr PR 722 BL

Germany

1995

used

on request

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Diesel Fork Lift

Linde H50D/H70D

Germany

2017

used

on request

INNO27984

There are 4 high-quality forklift trucks with diesel drive from the Linde HxxD series available. 1) Linde H50D, year of manufacture: 2015, operating hours: 17,213h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 2) Linde H50D, year of construction: 2016, operating hours: 13,499h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 3) Linde H50D-03, year of construction: 2020, operating hours: 10,616h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Without attachment. 4) Linde H70D, year of construction: 2017, operating hours: 8,365h, rated load capacity: 7000kg, weight: approx. 12,000kg. Without attachment. Documentation available. On-site inspection is possible. Individual sale possible.

CNC Universal Milling Machine

Deckel FP4-60

Germany

1999

used

on request

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

CNC Profile Machining Center

Tekna TK 426/3

Germany

1998

used

on request

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Ultrasonic Welding System

Telsonic/ Amtek Gmbh

Germany

2014

used

on request

INNO27967

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.