Used Machines from Germany - Page 5 | Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [81 - 100 of 3128]

Refrigerated Circulator

Peter Huber Kältemaschinenbau Polystat K6 / CC2

Germany

unknown

used

on request

INNO32623

Offered for sale are 2 refrigerated heating circulators with digital temperature control. Unit 1: Temperature range: -25 to +150°C. Refrigeration system operation: up to max. +80°C. Unit 2: Temperature range: -25 to +200°C, refrigerant charge: 0.07kg. Maximum pressure: 17bar. Control system: Digital CC2 temperature controller with display and control buttons. Equipped with a stainless steel bath, circulation and cooling unit, and connecting lines. Inspection possible by arrangement.

Ultrapure Water System

Millipore Milli-Q Academic

Germany

unknown

used

on request

INNO32622

Offered for sale is a laboratory ultrapure water system with digital controls. Control system: Digital control panel with LCD display and function keys. Equipped with a handheld water dispenser, flexible coiled hose and side-mounted filter cartridge. Inspection possible by arrangement.

Gel Dryer

Scie-plas GD4534

Germany

unknown

used

on request

INNO32621

Offered for sale is a laboratory gel dryer with digital temperature control. Maximum power consumption: 800W. Digital temperature controller with °C display. Equipped with a heated drying surface, separate timers for the heating element and vacuum pump, and an indicator light for the heating element. Inspection possible by arrangement.

Ultrapure Water System

Thermo Scientific GenPure Standard with xCAD

Germany

2012

used

on request

INNO32620

Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement.

Mould Carrier

Kannegiesser MLFT 8,5x12,5/8

Germany

unknown

used

on request

INNO32619

Offered for sale is a hydraulic mold carrier for mounting and operating molds in polyurethane processing. Equipment: Hydraulic actuation, upper and lower mold mounting platens, column guidance. Inspection possible by arrangement.

Dyeing Autoclave

Icymsa ATU 3000

Germany

unknown

used

on request

INNO32618

Capacity: 2800l, vessel diameter: 1350mm. Documentation available. Inspection possible by prior arrangement.

UV Dryer

Lc UV4000

Germany

unknown

used

on request

INNO32617

Pass-through width: 320mm, max. conveyor speed:20m/min, UV lamp power: 4kW, generator power: 5kW. machine dimensions X/Y/Z: approx. 2650mm/800mm/1750mm, weight: approx. 350kg.

Injection Moulding Machine

Krauss Maffei 800-5700 MC

Germany

1999

used

on request

INNO32616

Clamping force: 8,000kN, operating voltage: 400V, mains frequency: 50Hz, power supply: three-phase AC, 3 phases, total rated current: 400A, max. motor current: 205A, upstream fuse protection: 2x200A, an on-site inspection is possible.

Ink Jet Printer

Linx 8910

Germany

2018

used

on request

INNO32615

Two identical inkjet printers are available, printhead: Mk11 Midi, nozzle size: 62µm, supported print lines: 1, 2 or 3, character height: 1.8-20mm, max. printing speed for 1 line, 5-pixel character height: 6.25m/s (0.47mm dot spacing), 1 line, 7-pixel character height: 4.89m/s (0.55mm dot spacing), 2 lines, 7-pixel character height: 2.09m/s (0.37mm dot spacing), 3 lines, 7-pixel character height: 1.01m/s (0.37mm dot spacing), max. characters per second: 2,222, recommended printhead distance from product: 12mm, printhead distance for carton coding: 35mm, printhead length: 223mm, printhead diameter: 42mm, housing material: stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating temperature with Linx 1240 ink: 0-50°C, max. relative humidity: 90%, power supply: 100-230V AC, rated power: 150W, upper length: 440mm, lower length: 400mm, width: 355mm, height: 503mm, weight including fluids and printhead: 24kg, an on-site inspection is possible.

Bagging and Palletizing Line

Votech VLR-400-N

Germany

2024

used

on request

INNO32614

Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible.

Cleaning System

Dürr Ecoclean Universal 81W

Germany

1999

used

on request

INNO32613

Loading height: 850mm, basket dimensions: 670x480x300mm, max. batch weight: 150kg, exhaust air volume: 200m³/h, throughput: approx. 8-10 batches/h, rinsing temperature: 70-80°C, max. drying temperature: 130°C, number of immersion tanks: 2, power supply: 3x400V/50Hz, connected load: 58kW, system height: 2300mm, height of side structure: approx. 2200mm, left system section: approx. 1000mm, main system section: approx. 2800mm, right overhang: approx. 400mm, length: 3200-4200mm, width: 1800mm, height: 2300mm, operating hours: 43,294h, components: working chamber, immersion tank I, immersion tank II, oil separator, drying unit, filter. An on-site inspection is possible.

Vertical 5-Axis Machining Center

Tajmac Zpc S.s. MCFV 1060S

Germany

2008

used

on request

INNO32612

X-axis travel: 1016mm, Y-axis travel: 610mm, Z-axis travel: 760mm, distance from spindle nose to pallet: 150-910mm, distance from spindle axis to column: 635mm, distance from spindle axis to front of machine: 820mm, distance from table to floor: 959mm, working surface dimensions: 1270x590mm, number of T-slots: 5, T-slot width: 18mm, center T-slot dimensions: 18 H6 mm, centering bore diameter: 30 H6 mm, T-slot spacing: 125mm, max. table load: 1350kg, working feed rate: 0-15m/min, max. programmable feed rate: 40m/min, rapid traverse speed: 40m/min, acceleration: 5m/s², max. spindle speed: 10,000rpm, control system: HEIDENHAIN, length: 2750mm, width: 2120mm, height: 2100mm, weight: approx. 7.7t, operational hours counter: approx. 17,000h, including documentation. An on-site inspection is possible.

Two-Column Hydraulic Press

Hans Schoen UTE/B

Germany

1978

used

on request

INNO32611

Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible.

Filtration System

Moldow 061MHL-336EX

Germany

2017

used

on request

INNO32610

Airflow: 27,000m³/h, filter area: 215m², filter load: 126m³/m²/h, number of filter bags: 204, number of filter sections with 36 bags: 5, number of filter sections with 24 bags: 1, number of air injection sections: 1, chain speed: 3.9m/min, drive shaft speed: 5rpm, max. material throughput: 20m³/h, regeneration carriage travel speed: 6m/min, chain conveyor motor power: 0.55kW, chain speed: 3.9m/min, max. material throughput: 20m³/h, regeneration fan motor power: 4kW, regeneration carriage motor power: 0.37kW, regeneration carriage travel speed: 6m/min, length: 4500mm, width: 2700mm, height: 6615mm, weight: 4.4t, including documentation. An on-site inspection is possible.

Surface Grinding Machine

Schleifmaschinenfabrik Aba FP 60/40

Germany

1989

used

on request

INNO32609

Max. grinding length: 600mm, max. grinding width: 400mm, max. working height with new/worn grinding wheel: 550/650mm, max. workpiece weight: 300kg, clamping surface: 1020x300mm, number of T-slots: 1, T-slot width: 10mm, max. height above floor level: 1005mm, dimensions: 3140x2900x2140mm, weight: 2.9t, with electromagnetic chuck: 600x300mm and coolant system. An on-site inspection is possible.

Hydraulic Flat Bed Die Cutter

Schön & Sandt 530

Germany

unknown

used

on request

INNO32608

Punching force: 630kN, operating voltage: 380V, rated current: 25A, an on-site inspection is possible.

Four-Side Planer

H+k Vierseiter Gmbh Quadroplan 180

Germany

1998

used

on request

INNO32607

Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible.

Optical Profile Grinding Machine

Wickman Limited

Germany

unknown

used

on request

INNO32606

Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible.

Sheetfed Offset Press

Sakurai 466 SIP

Germany

2011

used

on request

INNO32605

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

Multi-Needle Quilting Machine

Oehler Ag STEPPEX HIGH-SPEED VPV-2271 74 SA4

Germany

unknown

used

on request

INNO32604

Working width: 1880mm, an on-site inspection is possible.