Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [101 - 120 of 2511]

CNC Tool Milling Machine

Deckel Maho FP 2 A

Germany

unknown

used

on request

INNO29240

A Maho universal tool milling machine is available. Travel X/Y/Z: 300mm/300mm/400mm, quill stroke: 60mm, table dimensions X/Y: 390mm/620mm, max. table load: 250kg, tool holder: SK40, feed: 3600mm/min, rapid traverse: 4000mm/min, control: Dialog 11. Documentation available. On-site inspection is possible.

Collating Machine

Theisen & Bonitz TB Sprint 303

Germany

1991

used

on request

INNO29239

Stations: 25, min. open format X/Y: 65mm/155mm, max. open format X/Y: 350mm/500mm, min. trimmed format X/Y: 65mm/65mm, output: 3100 cycles/h, paper thickness range: 18g-1000g/m², machine dimensions X/Y/Z: approx. 7350mm/1400mm/1600mm, weight: approx. 2700kg. On-site inspection is possible.

Pocket Folding Machine

Guk FA 36/4 SAF

Germany

1998

used

on request

INNO29238

Max. sheet format X/Y: 360mm/650mm, min. sheet format X/Y: 60mm/140mm, min. fold width: 26mm, folding speed: 10000-30000 sheets/h, speed: 30m-160m/min, suction feeder: SAF, buckle plates: 4, paper thickness range: 40g-200g/m². On-site inspection is possible.

Saddle Stitching Machine

Brehmer ST/HS

Germany

unknown

used

on request

INNO29237

A saddle stitching machine Brehmer Buchbindereimaschinen GmbH including 3-page trimmer, compensating stacker, circulating conveyor is available. Feeder stations: 6, weight: approx. 1630kg. On-site inspection is possible.

Capping Head

Datz VD 4 MCA

Germany

unknown

used

on request

INNO29236

A total of five Datz aluminum MCA capping heads are available for the VSO and VA series, but can also be used universally. One of the heads needs to be readjusted, the rest are ready for use. On-site inspection is possible.

Gearbox

Thyssen/polysius/wgw KS/027,5/N 45PS

Germany

1990

used

on request

INNO29235

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Burner

Weishaupt/seibold WC 500

Germany

2022

used

on request

INNO29234

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Cushioning Machine

Hildebrandt SpeedyPacker Insight

Germany

2014

used

on request

INNO29233

A Hildebrandt foam padding machine for padding fragile goods is available. Production capacity: 21 bags/min, padding combinations: 156, foam expansion: 280x, bag size range: 200mm-760mm, foam quantity range: 0%-55%, height adjustment: 600mm, machine dimensions X/Y/Z: approx. 1350mm/1000mm/2000mm-2600mm. Documentation available. On-site inspection is possible.

CNC Die Sinking Machine

Zimmer & Kreim ZK-1200

Germany

1998

used

on request

INNO29232

Travel X/Y/Z: 925mm/682mm/396mm, table dimensions X/Y: 1220mm/850mm, quill table distance: 650mm, dielectrum filling volume: 800l, filter cartridges: 4, electrode change: 16-fold, rinsing distributor positions: 12, rapid traverse: 2m/min, machine dimensions X/Y/Z: approx. 2200mm/2000mm/2750mm, weight: approx. 3700kg, operating hours: 50950h. The Z-axis must be adjusted, the machine control does not start up, the oil seals of the tank are leaking and the circulation pump is defective. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Alzmetall AB 3 ESV

Germany

1955

used

on request

INNO29231

Drilling capacity: 40mm, spindle mount: MK4, drill chuck: 1mm-13mm, throat depth: 250mm, quill stroke: 160mm, table dimensions X/Y: 620mm/470mm, column diameter: 120mm, spindle speed: 1420rpm. Machine dimensions X/Y/Z: approx. 900mm/725mm/1800mm, weight: approx. 615kg. The on/off switch of the machine must be replaced. An on-site inspection is possible.

Drying Oven

Memmert/binder UM 500/KBF 240

Germany

unknown

used

on request

INNO29229

A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.

Single Girder Bridge Crane

Konecranes CXTS1T

Germany

2020

used

on request

INNO29228

Load capacity: 1000kg, max. lifting height: 5700mm, crane span: 6000mm, total crane runway length: 7040mm, max. crane/crab travel: 4950mm/4800mm, max. hook position: 3100mm, rope diameter: 6.4mm, support base plate dimensions X/Y/Z: 400mm/400mm/15mm, operating hours: 21h. Documentation available. On-site inspection is possible.

Hot Stamping Press

Baier 4/B

Germany

unknown

used

on request

INNO29226

A Baier hot stamping machine is available. Pressing force: 100kN, heating power: 1800W, embossing dimensions X/Y: approx. 210mm/300mm, max. temperature: 130°C, table type: sliding table. On-site inspection is possible.

Welding Cell

Kuka flexibleCUBE DKP-400

Germany

2021

used

on request

INNO29225

A hardly used, compact Kuka gas-shielded welding cell with integrated robot, power source and media supply, especially for automated welding is available. Sides: 2, max. positioner load per side: 400kg, working area diameter and height: 700mm/800mm, robot type: Kuka KR10 R1420, robot repeat accuracy: +/-0.04mm, total system dimensions X/Y/Z: approx. 5850mm/4000mm/2700mm, weight: approx. 4000kg, operating hours: approx. 350h. Including a Fronius TPS 400i welding power source. Documentation available. On-site inspection is possible.

Tool Preset System

Zoller Venturion 500

Germany

2005

used

on request

INNO29224

A high-precision, modular Zoller V420DZ presetting and measuring machine for rotating tools is available. Measuring range X/Z: 220mm/500mm, max. tool diameter: 420mm, max. tool weight: 45kg, machine dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 1150kg. Including base frame, PC, monitor, printer and measuring software. Documentation available. On-site inspection is possible.

CNC Plate Drilling Machine

Wotan Rapid 2K

Germany

1983

used

on request

INNO29223

A CNC plate boring machine Wotan is available. Travel X/Y/Z/W: 6000mm/2500mm/800mm/600mm, tool positions: 60, spindle diameter: 130mm, tool holder: SK50, max. workpiece weight: 12500kg, rapid traverse: 10m/min. Rotary tables: 2, rotary table dimensions 1: 1250mm/1250mm, rotary table dimensions 2: 1600mm/1250mm, panel field dimensions X/Y: 6000mm/4000mm. Machine dimensions X/Y: approx. 12000mm/9000mm, weight: approx. 45000kg, control: Heidenhain iTNC 430, pendulum machining: possible. The machine was overhauled in 2015, the control system in 1998, including various accessories. The machine is at a standstill due to a cable break. Documentation available. On-site inspection is possible.

Continuous Inkjet Printer

Domino A320i

Germany

2013

used

on request

INNO29222

Printing speed: 325m/min, machine dimensions X/Y/Z: 450mm/360mm/530mm, weight: approx. 25kg, operating hours: 4143h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Thermal Transfer Printer

Domino V120i

Germany

unknown

used

on request

INNO29220

Five identical Domino V120i models are available. Max. Print area Intermittent Mode (IM)/ Continuous Mode (CM): 32x55/ 32x500mm, max. ribbon length: 650m, standard ribbon widths: 34mm, 22mm, max. print speed: 400mm/s, dimensions: 218x160x149.5mm, weight: 5.6kg. Printing features: date code format, offsets, shift codes, serial number generation, logos/bitmaps, bar codes, fonts. No known defects, with documentation and touch pads. On-site inspection is possible.

Embossing and Punching Machine

Baier Geba 46/A

Germany

unknown

used

on request

INNO29219

A fully automatic hot stamping and punching machine Baier Maschinenfabrik is available. Max. material width: 250mm, max. punching width: 240mm, heating power: 2200W, stamping force: 100kN. On-site inspection is possible.

Decoiler

H. Schleicher H-3

Germany

1978

used

on request

INNO29218

Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.