Used machines Germany - Innovac GmbH

Gear Shaping Machine

Lorenz S360

Germany

1965

used

on request

INNO30154

A vertical gear shaping machine Lorenz is available. Module: 6.5, stroke: 120mm, max. gear diameter: 900mm, max. workpiece weight: 180kg, min. concentricity: 0.1mm, min. squareness: 0.05mm, roundness: 0.1mm. An on-site inspection is possible.

more

Gear Hobbing Machine

Liebherr L 1202

Germany

1982

used

on request

INNO30153

Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible.

more

Center Lathe

Boehringer M670

Germany

1982

used

on request

INNO30152

A conventional screw-cutting lathe Boehringer is available. Swing over bed/cross slide: 690mm/415mm, distance between centers: 1500mm, cylindricity deviation (tapered) over 100mm: 0.15mm, roundness deviation: 0.02mm, total runout: 0.02mm, perpendicularity deviation over 200mm: 0.05mm, chuck diameter: 630mm-700mm. An on-site inspection is possible

more

CNC Turret Lathe

Dörries CTE 160

Germany

1978

used

on request

INNO30151

A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible.

more

Punch Press

Ebu HK 80 FR

Germany

2016

used

on request

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

more

Extruder Line

Battenfeld/gloenco PS-Schaum

Germany

1998

used

on request

INNO30149

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe.

more

CNC Lathe

Emag VL 2

Germany

2018

used

on request

INNO30148

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

more

CNC Machining Center

Micromill Challenger MM430

Germany

2012

used

on request

INNO30147

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

more

Double Mitre Saw

Mange Jixie MG-841

Germany

2012

used

on request

INNO30146

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

more

Robot

Franka Robotics Panda

Germany

2018

used

on request

INNO30145

Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible.

more

Transport System

Schäfer Weasel

Germany

2020

used

on request

INNO30144

An automated guided vehicle for flexible in-plant material transport is available. Gradient unloaded/loaded: 20%/10%, max. payload: 35kg, max. product dimensions X/Y/Z: 600mm/400mm/220mm, max. speed: 1m/s, min. turning radius: 600mm, charging time: 8h, operating time: 16h. Machine dimensions X/Y/Z: approx. 810mm/420mm/1000mm, net weight: 30kg, battery weight: 9.4kg. Documentation available. On-site inspection is possible.

more

Lathe

Weiler MDU 260

Germany

1977

used

on request

INNO30143

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

more

Network Analyzer

Hp 8753D/3325A

Germany

unknown

used

on request

INNO30142

Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.

more

Filling and Capping Line

Alwid Superior 48HV/10PP

Germany

2019

used

on request

INNO30141

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

more

Upright Drilling Machine

Snow TA-3-S/TA-3

Germany

unknown

used

on request

INNO30139

Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible.

more

CNC Machining Center

Alzmetall GX 1000/5 - FDT

Germany

2008

used

on request

INNO30138

A CNC 5-axis portal machining center Alzmetall with milling-turning table is available. Travel X/Y/Z: 800mm/800mm/600mm, B-axis swivel: +/-120°, C-axis rotation: 360°, table diameter: 630mm, max. table load: 1000kg, tool holder: HSK-A63, spindle speed: 12000rpm, tool positions: 33, max. workpiece diameter: 90mm/125mm, max. tool length: 300mm, max. tool weight: 8kg, rapid traverse: 60m/min, feed rate: 30m/min. Machine dimensions: approx. 3700mm/3000mm/3200mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible.

more

Winding Machine

Blume & Redecker AM 100/AM150

Germany

1980

used

on request

INNO30137

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

more

Cable Processing Machine

Metzner Triathlon

Germany

2001

used

on request

INNO30136

An automatic cutting, stripping, and crimping machine by Metzner for stranded wires and cables is available. Feed rate: 60m/min, cable length range: 160mm-999mm, cable length tolerance: +/-0.5%, max. stripping length 1/2: 70mm/40mm. Conductor cross-section range: 0.14mm²-6mm², outer cable diameter: 6mm, crimping force: 15kN, cutting accuracy per 100mm: +/-0.2mm, throughput: approx. 1200 wires/h. Machine dimensions X/Y/Z: approx. 1650mm/1250mm/1650mm, weight: approx. 400kg. On-site inspection is possible.

more

Mixing System

Khs Paramix CMX 28

Germany

1992

used

on request

INNO30135

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

more

Empty Bottle Inspection Machine

Heuft InLine II IR/ HBBIP II//

Germany

2013

used

on request

INNO30134

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

more