Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [21 - 40 of 2456]

Press Brake

Hämmerle AP 200x2600

Germany

1990

used

on request

INNO29070

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

Eccentric Press

Weingarten TYP AR 200.55

Germany

1975

used

on request

INNO29069

A Weingarten single-column eccentric press is available. Press force: 200kN, stroke rate: 40rpm, throat: 550mm, rear-front passage: 800mm, table ram distance: 400mm, ram stroke: 40mm-180mm, ram adjustment: 110mm, ram dimensions X/Y: 1200mm/800mm, table dimensions X/Y: 1200mm/1000mm, mortise diameter: 50mm, mortise depth: 85mm, motor power: 15kW, machine weight: approx. 13200kg. On-site inspection is possible.

Induction Hardening Machine

Fdf Fritz Düsseldorf Freiburg HGL-400

Germany

1978

used

on request

INNO29068

Connected loads: 3x 300V/ 50 Hz. Includes induction unit, fume extractor, main switch, control unit, frequency converter, cooling water system, industrial recooler for the hardening system and cooling water. Operated until last. On-site inspection is possible.

CNC Lathe

Pinacho Smart Turn 6/180-100

Germany

2006

used

on request

INNO29067

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

Blast System

Gutmann 1250

Germany

1995

used

on request

INNO29066

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.

Hardening Oven

Stahlmann Schienen-Härteofen

Germany

2018

used

on request

INNO29065

A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible.

Compressor

Bauer Verticus 5

Germany

2012

used

on request

INNO29064

Motor power: 11kW, speed: 1320rpm, volume flow: 520l/min, max. operating pressure: 330bar, filter: P61 with B-Securus, control: B-Control, machine dimensions X/Y/Z: approx. 900mm/1700mm/1600mm. Documentation available. On-site inspection is possible.

Panel Saw

Holz-her Super Cut 1215

Germany

unknown

used

on request

INNO29063

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Pendulum Saw

Pfeiffer Piccolo EP-150

Germany

1981

used

on request

INNO29062

A Pfeiffer parallel pendulum saw for the woodworking industry is available. Cutting height: 150mm, cutting width: 675mm, saw blade diameter: 500mm, machine length including roller conveyor: approx. 6800mm, roller conveyor width: 600mm, roller conveyor length left/right: 3000mm/1500mm. Including roller conveyor. On-site inspection is possible.

Deburring Machine

Reis RV30-26-RSVI

Germany

2014

used

on request

INNO29061

A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.

Truck

Man/hiab TGX 26.400/XS122

Germany

2016

used

on request

INNO29060

A MAN truck including HIAB crane superstructure and a trailer is available. 1) Truck MAN TGX 26.400, first registration: 2016, engine power: 400hp, transmission: automatic, mileage: approx. 815000km, engine: D26, 6-cylinder in-line engine, fuel: diesel, axles: 3, payload: approx. 17500kg, wheelbase: approx. 4800mm, tank volume: approx. 460l, cabin dimensions Y/Z: approx. 3500mm/2550mm, unladen weight: approx. 8500kg. 2) Built-in loading crane HIAB XS 122, load torque: 121kNm, max. reach: 12500mm, load capacity at max. reach: approx. 800kg, boom length: 8400mm, machine dimensions X/Y/Z: approx. 2500mm/850mm/2300mm. 3) Trailer with open box body, first registration: 2014, axles: 2, permissible total weight: approx. 13500kg, load securing: lashing eyes/C-rails. Documentation available. On-site inspection is possible.

Compressor

Atlas Copco GA 15 FF

Germany

2000

used

on request

INNO29059

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

Double Mitre Saw

Emmegi Norma 2-400 TU/4

Germany

2020

used

on request

INNO29058

Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.

Glass Frame Saw

Haffner GL 172

Germany

1995

used

on request

INNO29057

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

Mixing System

T-s-i mastermix gear basic

Germany

2014

used

on request

INNO29056

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Mesh Welding System

Ideal GA 400/1600

Germany

1988

used

on request

INNO29055

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

Mesh Welding System

Evg LGR/85-PV

Germany

2001

used

on request

INNO29054

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible.

Mesh Welding System

Filzmoser GH400V-ST

Germany

2009

used

on request

INNO29053

A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible.

Butt Welding Machine

Strecker SS 120 FPC

Germany

2011

used

on request

INNO29052

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Steam Boiler

Standardkessel Duisburg/weishaupt RGL50-2-A

Germany

2007

used

on request

INNO29051

A boiler system consisting of a Baumgartner boiler and a Weishaupt burner is available. 1) Standard boiler Duisburg. 2) Weishaupt RGL50/2-A burner, year of construction: 2007, version: ZM-NR, gas type: N, output min./max.: 600kW/5400kW, connection pressure min./max.: 15mbar/500mbar, heating oil min./max.: 95kg/453kg/h, electrical output: 16.59kW. Total system output: approx. 4000kg/h. Documentation available. On-site inspection is possible.