Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [41 - 60 of 2583]

Flat Bed Punching and Embossing Machine

Heidelberger Druckmaschinen Promatrix 106 CS/CSB

Germany

2021

used

on request

INNO29812

Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.

Spark Erosion Machine

Wagner Maschinen DM-323

Germany

1988

used

on request

INNO29811

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

Low-Voltage Motors

Siemens SIMOTICS SD 1LE5/ 1LE1

Germany

2021

used

on request

INNO29810

A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible.

Lathe

Meuser M1 P

Germany

unknown

used

on request

INNO29809

Speed: 45-1800/min, the machine is functional. An on-site inspection is possible.

CNC Lathe

Gildemeister NEF 400

Germany

2006

used

on request

INNO29808

Max. spindle speed: 4000/min, connected load: 21kVA, control: Siemens Sinumerik 840D, length: 2100mm, width: 1750mm, height: 1710mm, weight: 2.8t. With chip conveyor, internal cooling and manually movable tailstock, without turret. The machine requires an overhaul. An on-site inspection is possible.

Vacuum Machine

Vac-star S220 CLGSL

Germany

unknown

used

on request

INNO29807

Pump type: Busch R5 0021 (21m³/h rotary vane vacuum pump), power: 0.8kW, voltage: 3x 400V, current consumption: 3A, max. vacuum performance: 99.9%, housing: stainless steel, transparent acrylic hood, operation: digital control with program memory. Variant: chamber machine, larger chamber design, gas-flush function, simple sealing bar. Year of manufacture unknown, without documentation. An on-site inspection is possible.

Semi-Automatic Tray Sealer

Multivac T200

Germany

2006

used

on request

INNO29806

Tray dimensions variably divisible: 380x300mm, max. tray height: 110mm, material: preformed sealable trays made of monofilm or multilayer film, foam materials, cardboard and aluminum trays with sealable layer, top film material: heat-sealable film, print: unprinted or with continuous print, max. width: 450mm, max. roll diameter: 250mm, output capacity depending on pack and tray size: 3–12 trays/min, vacuum pump: installed; standard 40m³/h, optional 63m³/h, compressed air connection: 7bar, compressed air consumption: approx. 30 l/cycle, cooling water pressure: 4bar, connected load: 3.8kW, working height: 723mm, length: 1460mm, height: 1629mm, width: 781mm, weight: approx. 300kg. Equipment: gas flushing system for modified atmosphere packaging (MAP), oxygen flushing possible, register control for spot-printed top film, external gas mixer, monitoring packages for validation and calibration. An on-site inspection is possible. Without documentation.

Semi-Automatic Skin Pack Machine

Sealed Air Cryovac VS26

Germany

2021

used

on request

INNO29805

A semi-automatic machine that uses preformed trays loaded outside the line with a multi-tray carrier is designed for use with Cryovac Darfresh® film. Max. output capacity: 15 packages/min, connected load: 7.7kW, weight: 500kg. Suitable for fresh meat, fish, fresh seafood, processed meat, frozen products, poultry, cheese, ready meals. Features: change of product format, positioning and unwinding of the film, produces packaging with the high-temperature Darfresh® process, produces packs with long shelf life. With documentation. An on-site inspection is possible.

Universal Smoking and Cooking Machine

Bayha & Strackbein 1500C

Germany

1999

used

on request

INNO29804

Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible.

Band Saw

Meber SR700

Germany

2017

used

on request

INNO29803

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

Centrifugal Disc Finishing Unit

Walther Trowal TT 90-A/2C-V9

Germany

2018

used

on request

INNO29802

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible.

CNC Wire EDM Machine

Charmilles Technologies Robofil 6000

Germany

1990

used

on request

INNO29801

With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible.

Manual Pedestrian Reach Stacker

Combilift COMBI-WR4

Germany

2023

used

on request

INNO29800

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible.

Cross-Cut Saw

Reinhardt Slimline SL 170

Germany

2005

used

on request

INNO29799

Max. cutting width: 290mm, max. cutting height: 170mm, positioning accuracy: +/- 0.5mm, saw blade, carbide diameter/thickness: 600/5mm, saw blade diameter: 600mm, saw blade bore: 30mm, feed speed: 90m/min, extraction diameter: 2x125mm, saw blade dimensions: 600x30mm, saw unit power: 7.5kW, connected load: 10kW, length: 12,610mm, width: 1908mm, weight approx. 2t, with operating manual and spare parts list. In 2024, the pusher was renewed. An on-site inspection is possible.

Preheating Oven

Global Vacuum Presses Ecotherm Professional GET-P-3114-ZZ

Germany

2015

used

on request

INNO29798

Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible.

Sliding Table Saw

Otto Martin T 73 BASIC

Germany

2005

used

on request

INNO29797

Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible.

Lathe

Tislar TIS-140 NP

Germany

2000

used

on request

INNO29796

Rated current: 16A, rated fuse current: 16A, control voltage: 24V, rotational speed: 63-4500/min, connected load: 2.5/3kW, control panel: RATIONAL, weight: 1.05t. With digital display: rational 3-axis display (X, Y, Z) for precise position reading, headstock: conventional drive with change gears for thread cutting, tailstock: manually movable with handwheel, support: top slide and cross slide, manually operable, emergency stop and operating elements. An on-site inspection is possible.

Thread Milling Machine

Mikron 132.02

Germany

unknown

used

on request

INNO29795

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

Cart Beam Punch

Leiner KKD-50

Germany

2003

used

on request

INNO29794

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Cart Beam Punch

Leiner KKD-30

Germany

2000

used

on request

INNO29793

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.