Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [121 - 140 of 2592]

Compressor

Atlas Copco XAS 137

Germany

unknown

used

on request

INNO30098

A diesel compressor Atlas Copco is available. Year of manufacture: approx. 2015, max. operating pressure: 7bar, volume flow: 7.6m³/min, power: approx. 55kW, fuel tank: 117l, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1500mm, weight: approx. 1500kg. An on-site inspection is possible.

Underground Loader

Ghh LF-6.1

Germany

1994

used

on request

INNO30097

A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.

Center Lathe

Stanko Samat 400S-750

Germany

1999

used

on request

INNO30096

A lead and feed screw lathe Stanko with a 2-axis digital display Heidenhain is available. Distance between centers: 750mm, center height: 200mm, turning diameter over bed/support: 400mm/220mm, spindle bore: 45mm, spindle taper: MK6, speed: 2000rpm, chuck diameter: 200mm, tool positions: 4. Machine dimensions X/Y/Z: approx. 2300mm/1150mm/1550mm, weight: approx. 2100kg, control: 2-axis digital display Heidenhain. Including machine feet, digital display, and 2–3 tool holders. Documentation available. An on-site inspection is possible.

Compact Gear Motor

Lenze g500-B600

Germany

unknown

used

on request

INNO30095

Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.

Injection Moulding Machine

Arburg/battenfeld/demag 420C/BA 500-200/Concept/System

Germany

2000

used

on request

INNO30094

Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible.

Surface Grinding Machine

Jakobsen SJ 824

Germany

unknown

used

on request

INNO30093

Table dimensions X/Y: 400mm/800mm, max. workpiece height: 300mm, grinding wheel diameter: 300mm-350mm, weight: approx. 2000kg. An on-site inspection is possible.

CNC 5-Axis Machining Centre

Mtrent MTCut UDS80H-5A

Germany

2019

used

on request

INNO30092

A CNC 5-axis high-speed milling machine Maxiport Corporation is available. Travel X/Y/Z: 800mm/1010mm/650mm, speed: 20000rpm, torque: 120Nm, drive power: 35kW, tool holder: HSK-63, tool positions: 96, tool changer: double gripper, rotary table diameter: 800mm, weight: approx. 19000kg, control: Heidenhain TNC 640, operating hours: 6905h, running hours: 2215h. Including Heidenhain TS460, chip conveyor, Blum tool measurement, 50bar ICS with coolant system, Heidenhain KinematicsOpt with calibration sphere KKH250, extraction system Filtermist FX4002, and tool package. The machine has a defect that will be repaired before sale. Documentation available. An on-site inspection is possible.

Heat Exchanger

K. Ley/weisstaler/vehterus/gea

Germany

2012

used

on request

INNO30091

Four heat exchangers from various manufacturers are available. 1) Shell and tube heat exchanger K. Ley Maschinen- und Apparatebau, year of manufacture: 1999, material: stainless steel/cast iron, heat transfer surface: 30m²-40m², operating pressure inside/outside: 25bar/45bar, max. operating temperature: 250°C, internal/external volume: 290l/200l, machine dimensions X/Y: approx. 6400mm/400mm, weight: approx. 1800kg. 2) Shell and tube heat exchanger Wisstaler Hüttental, year of manufacture: 1979, heat transfer surface: 80m²-120m², max. operating temperature: 150°C, internal/external volume: 579l/1387l, machine dimensions X/Y: 2500mm/800mm, weight: approx. 2800kg. 3) Shell and tube heat exchanger Vehterus PSHE 3LL-270/5/5, year of manufacture: 2012, heat transfer surface: 19.9m², capacity: 245kW, operating pressure: 16bar, test pressure: 33bar, max. operating temperature: 110°C, internal/external volume: 21.4l/33.2l, machine dimensions X/Y: approx. 850mm/400mm, weight: approx. 300kg. 4) Plate heat exchanger GEA BT30-5C-10V-80, year of manufacture: 2010, heat transfer surface: 5m²-10m², max. operating temperature: 200°C, machine dimensions X/Y/Z: approx. 500mm/350mm/750mm, weight: approx. 520kg. Documentation available. An on-site inspection is possible. A package sale is preferred.

Remaining Stock

Ruchser/elumatec RU-FE/RU-EV-HS/KF 78-60

Germany

2006

used

on request

INNO30090

Three smaller machines for window and profile processing purposes are available. 1) Profile gluing machine Ruchser RU-FE, year of manufacture: 2003, film width range: 30mm-250mm, film inner/outer diameter: 75mm/270mm, profile thickness range: 30mm-100mm. 2) Rubber inserting machine Ruchser RU-EV-HS, year of manufacture: 2006, profile width range: 20mm-100mm. 3) 2-head profile milling machine Elumatec KF 78/60, year of manufacture: 1993, vertical milling X/Y/Z: 290mm/100mm/120mm, horizontal milling X/Y/Z: 270mm/70mm/120mm, speed: 6000rpm/12000rpm. An on-site inspection is possible.

Metal Press

Rmh / Diebels Recyclingmaschinen RMH MB (Mini Baler)

Germany

2013

used

on request

INNO30089

A metal press RMH MB (Mini Baler) by RMH Diebels Recyclingmaschinen is offered. Filling box dimensions: approx. 815mm/350mm/510mm, bale size: approx. 350mm/200mm, pressing cycle: approx. 1min, cutting blades on three sides of the filling box, lid shear force: 20t, bottom ram force: 40t, operating pressure: approx. 220bar, machine dimensions X/Y/Z: approx. 2450mm/1200mm/1400mm, weight: approx. 1800kg. An on-site inspection is possible by appointment.

Reflow Soldering Oven

Smt 1.7 TC

Germany

2002

used

on request

INNO30088

A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026.

Film Wrapping Packaging Machine

Beck beck-Multiplex MP pico

Germany

unknown

used

on request

INNO30087

A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment.

Tube Filling Machine

Norden Machinery Nordenmatic 1400-M/HF/HA

Germany

1992

used

on request

INNO30086

A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.

Cellophane Wrapping Machine

Amtec ROTOwrap C 65

Germany

unknown

used

on request

INNO30085

A fully automatic cellophane wrapping machine is available. Packaging capacity: approx. 65cycles/min, folding box length range: 40mm-120mm, folding box width range: 40mm-120mm, folding box height range: 20mm-75mm, film types: PP/BOPP, machine dimensions X/Y/Z: approx. 1550mm/850mm/2200mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Flatbed Printer

Fuji Acuity 15

Germany

2018

used

on request

INNO30084

A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated.

Industrial Robot

Kuka KR 30 L16-2

Germany

2015

used

on request

INNO30083

A KUKA robot is offered. Axes: 6, control: KUKA KR C4, payload: 16kg, reach: 3102mm, repeat accuracy: +/-0.07mm, net weight: approx. 700kg, operating hours: approx. 44.000h. Documentation available. An on-site inspection is possible by appointment.

CNC Milling Machine

Klsa KPL 330

Germany

unknown

used

on request

INNO30082

A self-built CNC milling machine by Klein GmbH is available. Travel X/Y/Z: 980mm/415mm/90mm, machine dimensions X/Y/Z: approx. 2200mm/1550mm/3000mm. An on-site inspection is possible.

Robot Welding Plant

Cloos QRC-350/Quirox

Germany

2018

used

on request

INNO30081

A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible.

Wet Glue Labeller

Langguth E20

Germany

1990

used

on request

INNO30080

A linear wet glue/cold glue labeling machine Langguth for cylindrical containers is available. Gluing height: 210mm, labeling capacity: approx. 7000/h, labeling method: wet glue/cold glue, container diameter: 73mm/83mm/99mm, machine dimensions X/Y/Z: approx. 3000mm/1300mm/1800mm, weight: approx. 350kg. An on-site inspection is possible.

Stirring Tanks

Sielmann

Germany

1997

used

on request

INNO30079

Material: stainless steel, stainless steel type: 1.4301, volume: 1900l. Including agitators. An on-site inspection is possible.