Maszyny Uzywane Niemcy - Innovac GmbH

Piec hartowniczy

Caldatrac CDF 60/90/60

Niemcy

2001

używany

na żądanie

INNO27580

Internal dimensions X/Y/Z: 600mm/900mm/600mm, nominal temperature: 350°C, heating capacity: 13.5kW, usable space: 0.32m³, total steam space: 0.57m³, min. exhaust air volume flow: 120m³/h.

więcej

System kontroli

Mettler Toledo Ci-Vision 2 Cam Container

Niemcy

2013

używany

na żądanie

INNO27578

Output: 1000/min, number of cameras: 2. On-site inspection is possible.

więcej

Odlewnia ciśnieniowa

Oskar Frech DAK 200

Niemcy

1989

używany

na żądanie

INNO27574

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

więcej

Wózek podnośnikowy

Still EXD-SF20

Niemcy

2012

używany

na żądanie

INNO27559

Two almost identical Still pallet trucks are available. Load capacity: 2000kg, drive: electric, drive power: 2.3kW, max. battery capacity: 375Ah, lifting height: 2110mm, wheelbase: 1518mm, tire type: polyurethane, fork length: 1150mm. Machine dimensions X/Y/Z: approx. 2100mm/720mm/1300mm, weight: approx. 1100kg, operating hours 1/2: 4472h/4904h. Documentation available. On-site inspection is possible.

więcej

Wózek widłowy elektryczny

Linde E16C

Niemcy

1997

używany

na żądanie

INNO27558

Load capacity: 1600kg, lifting height: 4000mm, free lift: 1500mm, overall height: 1970mm, turning radius: 1505mm, travel speed: 16km/h, lifting speed: 0.6m/s, lowering: 0.58m/s, tires: superelastic, fork length: 1200mm, drive: electric, weight: approx. 3300kg, operating hours: 9052h. Documentation available. On-site inspection is possible.

więcej

Pozioma piła taśmowa

Bauer HS 300 A

Niemcy

1990

używany

na żądanie

INNO27555

Saw blade dimensions: 3660mm/27mm/0.9mm, cutting range at 90° round material/flat material: 300mm/385mm x 220mm, saw blade speed: 20m-70m/min, saw blade roller diameter: 450mm, power: 1.5kW, machine dimensions X/Y/Z: approx. 220mm/1500mm/1200mm. On-site inspection is possible.

więcej

Piła taśmowa

Knuth

Niemcy

2010

używany

na żądanie

INNO27553

A Knuth band saw is available. Power: 0.75kW, voltage: 400V, frequency: 50Hz. On-site inspection is possible.

więcej

Tokarka pionowa CNC

Gildemeister CTV 250

Niemcy

2002

używany

na żądanie

INNO27550

Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.

więcej

Rozdrabniacz

Neue Herbold BM 170/260

Niemcy

2016

używany

na żądanie

INNO27548

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania, wypełniania i uszczelniania

Pfm

Niemcy

2009

używany

na żądanie

INNO27543

A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible.

więcej

Maszyna do formowania, wypełniania i uszczelniania

Pfm Zenith

Niemcy

2012

używany

na żądanie

INNO27542

Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible.

więcej

Pozostałe zapasy maszyn do przetwarzania żywności

Niemcy

nieznany

używany

na żądanie

INNO27541

1) 3x 500l stainless steel container. 2) 9x PVC lids for stainless steel containers, diameter: 1120mm, lid thickness: 20mm. 3) Telescopic table, length range: 1650mm-6800mm. 4) Stirrer. 5) Drying and screening cabinet, machine dimensions X/Y/Z: approx. 1250mm/1200mm/800mm.

więcej

Piec konwekcyjno-parowy

Rational CPC 102

Niemcy

2004

używany

na żądanie

INNO27540

Temperature range: 30°C-300°C, water pressure: 150kPa-600kPa, power: 31.5kW, cooking programs: 350, fan speeds: 5, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1200mm. Documentation available.

więcej

Sprężarka

Remeza/haro BK7/Remcomp SB4/CLA 200

Niemcy

2020

używany

na żądanie

INNO27538

Three Remeza compressors and a Haro feed pump are available. 1) Remeza Remcomp SB4/C-100, year of manufacture: 2011, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 2) Remeza Remcomp SB4/C-200, year of manufacture: 2012, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 3) Remeza BK7, year of manufacture: 2008, type: screw compressor, output: 700l/min, max. operating pressure: 10bar, power: 5.5kW. 4) Haro GF feed pump, year of manufacture: 2020.

więcej

Suszarnia

Klarstein Pro Series

Niemcy

nieznany

używany

na żądanie

INNO27537

A Klarstein dehydrator is available. Temperature range: 40°C-90°C, max. timer: 15h, compartments: 24, max. capacity: 85kg, power: 5850W, volume: approx. 10m², machine dimensions X/Y/Z: approx. 700mm/1400mm/880mm, weight: approx. 160kg.

więcej

Tokarka cykliczna CNC

Harrison Alpha 400 Plus

Niemcy

1997

używany

na żądanie

INNO27527

Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible.

więcej

Symultaniczne centrum tokarskie CNC

Spinner TTS65-Triplex

Niemcy

2019

używany

na żądanie

INNO27526

A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible.

więcej

Wóz paszowy

Walker Merkur 12

Niemcy

2012

używany

na żądanie

INNO27525

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

więcej

Silos

Wilhelm Kurz & Söhne

Niemcy

1986

używany

na żądanie

INNO27524

Volume: 29000m³, content: 29m³/l.

więcej

Chłodnica powierzchniowa

Heatcraft Europe FC PU06

Niemcy

nieznany

używany

na żądanie

INNO27520

A surface cooler with various small appliances is available. 1) Surface cooler Heatcraft Europe FC PU06DL02D3 1C4 33 B, volume flow: 62dm³. 2) KSB pump, year of manufacture: 2020, output: 4kW. 3) Lifting machine for coil holder Oerlikon HM-2529. 4) Blower Ferrari FR 1001 N04S/3RD 90, year of manufacture: 2019, speed: 1500 rpm, max. temperature: 100°C, power: 75kW. Documentation available. On-site inspection is possible.

więcej