Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1921 - 1940 of 2654]

Kompletny system lakierowania

Bürkle/finnrose/hackemack/sergiani KTR 2040/FLT 6/DAL1-1200/Monomatic S

Niemcy

1993

używany

na żądanie

INNO26879

A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible.

Komora suszenia ciągłego

Finnrose/dustcontrol Fodo-3-1/DC/DT 5000/1300

Niemcy

1993

używany

na żądanie

INNO26878

There are 2 Finnrose/Dustcontrol drying channels available. 1) Finnrose A/S Fodo-3-1, year of manufacture: 1993. 2)Dustcontrol DC/DT 5000/1300, year of manufacture: 1984. Air capacity supply air/exhaust air: 1200/1200m³/h, power requirement supply air: 7.5kN ex, heating medium: 120-100°C, heat quantity: 66.2kW. Solvent vapor quantity/D max.: 140l/min, solvent quantity/C max. 480g/min. On-site inspection is possible.

Hydrauliczna wiertnica gąsienicowa

Klemm KR 802

Niemcy

2001

używany

na żądanie

INNO26876

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.

Wymiennik ciepła ze skrobakiem powierzchni

Gerstenberg Schröder FK01/120-1400

Niemcy

1989

używany

na żądanie

INNO26864

Max. Operating pressure: 20 bar, max. temperature range: 120°C.

Maszyna do układania palet

Weimer UPHS

Niemcy

1996

używany

na żądanie

INNO26862

A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible.

Sprężarka i osuszacz chłodniczy

Gea Grasso OS3

Niemcy

2007

używany

na żądanie

INNO26863

Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg.

Kompletna linia do produkcji mozzarelli

Dima

Niemcy

2020

używany

na żądanie

INNO26852

A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets.

Sprężarka śrubowa

Atlas Copco GX5FF EP

Niemcy

2019

używany

na żądanie

INNO26851

There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available.

Piec retortowy

Xerion XRetort

Niemcy

2015

używany

na żądanie

INNO26848

There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible.

Przenośnik rolkowy

Niemcy

2016

używany

na żądanie

INNO26847

There are 2 pallet roller tracks available with separation and brake rollers at the end of the track. Format: pallets 1200mm/800mm, length: 4000mm, width: 1000mm.

Roboty

Kuka/abb KR/IRB

Niemcy

2014

używany

na żądanie

INNO26842

There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel.

Bonder do grubego drutu

Hesse Bondjet 939

Niemcy

2012

używany

na żądanie

INNO26845

There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg.

Maszyna do piaskowania

Peenmatic 1800 SDK

Niemcy

2000

używany

na żądanie

INNO26817

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

Wiertarko-frezarka

Hille/raboma/shw UE 21/SKM/BG 80

Niemcy

1959

używany

na żądanie

INNO26815

There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible.

Nawijarka foliowa

Cyklop GL110/11

Niemcy

nieznany

używany

na żądanie

INNO26808

Diameter of the winding plate: 1500mm, height of the machine: 2500mm. Documentation available.

Ploter

Hp Designjet T520 ePrinter

Niemcy

2014

używany

na żądanie

INNO26809

Number of print cartridges: 4 (cyan, magenta, yellow, black), ink types: Dye-based (C, M, Y) and pigment-based (K), print quality max: 2400 x 1200 optimized dpi, minimum line width: 0.07mm, line precision: ±0.1%, max optical density (black): 8 L* min/2.10D. Documentation available.

Profilometr

Keyence VR-5200

Niemcy

2019

używany

na żądanie

INNO26798

Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.

Piła tarczowa

Eisele VMS-III-S

Niemcy

1991

używany

na żądanie

INNO26791

Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm.

Obrotowa prasa krawędziowa

Reinhardt RAS 74.30

Niemcy

nieznany

używany

na żądanie

INNO26790

Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg.

Optyczny system pomiarowy

Keyence IM-6125

Niemcy

nieznany

używany

na żądanie

INNO26781

Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).