Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1121 - 1140 of 2563]

Maszyna do sitodruku

Thieme 3020H

Niemcy

1996

używany

na żądanie

INNO28629

Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.

Składarka

Mbo FW 56/4

Niemcy

nieznany

używany

na żądanie

INNO28627

An MBO folding machine is available. Buckle plates: 4, max. paper width: 560mm. On-site inspection is possible.

Maszyna wykrawająca

Drinns CDCS251P81

Niemcy

2005

używany

na żądanie

INNO28626

A Drinns flywheel eccentric punching machine is available. Pressing force: 250kN, ram table distance: 230mm, stroke adjustment: 10mm-65mm, number of strokes: 145 strokes/min, flywheel speed: 145rpm, max. tool weight: 190kg, machine weight: approx. 2250kg. Documentation available. On-site inspection is possible.

Maszyna do sitodruku

Europa-siebdruckmaschinen-centrum Serifast 80-120

Niemcy

2004

używany

na żądanie

INNO28625

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

Automatyczny system kontroli rentgenowskiej

Anritsu XR 75 (KXS7522AVCLE)

Niemcy

2016

używany

na żądanie

INNO28620

An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible.

Maszyna licząca

King TB4

Niemcy

2006

używany

na żądanie

INNO28618

Counting capacity: tablets: 2600/h, capsules: 800/h, containers: 30/h, batch capacity: 10000 units, material: stainless steel. Machine dimensions X/Y/Z: approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

Kompaktowa jednostka obkurczająca

Italdibipack Espert 2N

Niemcy

2014

używany

na żądanie

INNO28617

Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Wózek widłowy

Heli/jungenheinrich/linde CPOD25H/EJC Z16/L 14

Niemcy

2010

używany

na żądanie

INNO28616

Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.

Aluminiowy separator mokry

Ventilatorenfabrik Oelde RWA315E-AL

Niemcy

2014

używany

na żądanie

INNO28614

Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Aluminiowy separator mokry

Ventilatorenfabrik Oelde RWA450E-AL

Niemcy

2018

używany

na żądanie

INNO28613

Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Maszyna do szlifowania i polerowania cylindrycznego

Loeser RP+S 374/2

Niemcy

2016

używany

na żądanie

INNO28612

Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Tokarka centralna

Wmw DLZ 450x1600

Niemcy

1965

używany

na żądanie

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Kabina lutownicza

Pötter PK-IAT-L 1400

Niemcy

2011

używany

na żądanie

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.

Wciągarki linowe

Konecranes HoistMaster 2i

Niemcy

nieznany

używany

na żądanie

INNO28600

Six identical Konecranes wire rope hoists are available. Including frequency converter and braking resistor. Documentation available. On-site inspection is possible.

Wiertarka stołowa CNC

Tos WHN 10 TNC

Niemcy

1989

używany

na żądanie

INNO28598

Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible.

Prasa jednokolumnowa

Neff T 6.3/EP10

Niemcy

1989

używany

na żądanie

INNO28594

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

Wiertarka

Alzmetall Abomat 30

Niemcy

1982

używany

na żądanie

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Piła taśmowa

Mep Shark 281

Niemcy

nieznany

używany

na żądanie

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

Odciąg oparów spawalniczych

Teka Filtercube 4H

Niemcy

2014

używany

na żądanie

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Bystronic ByStar Fiber 10kW

Niemcy

2017

używany

na żądanie

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.