Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1101 - 1120 of 3096]

Odciąg wiórów i filtr

Ivat Profi-Tower RS 28.000K

Niemcy

2019

używany

na żądanie

INNO31051

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Wywrotka

Faun K 35.5

Niemcy

1982

używany

na żądanie

INNO29368

Engine: Klockner Humboldt Deutz F12L413F, power: 282kW, torque: 1227Nm, cylinders: 12, displacement: 19144cm³. Speed: 55km/h, wheels: 6, skip capacity painted/heaped: 15.3m³/21.1m³. Unladen weight: approx. 23000kg, payload: 32000kg, total weight: approx. 55000kg, machine dimensions X/Y/Z: approx. 7750mm/3650mm/3600mm, operating hours: 10990h. The tipper got new tires from Bridgestone in 2019. Documentation available. On-site inspection is possible.

Maszyna do ostrzenia i walcowania

Krollmann Nowa 3/S

Niemcy

1991

używany

na żądanie

INNO31049

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

Maszyna do prostowania i cięcia drutu

Wafios R 31

Niemcy

nieznany

używany

na żądanie

INNO31047

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

Instalacja do pasteryzacji

Alfa Laval E 110/E 210

Niemcy

2009

używany

na żądanie

INNO31046

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

System chłodzenia

Green Box Twin 26/HP

Niemcy

2012

używany

na żądanie

INNO31045

An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.

Maszyna do cięcia laserowego CNC

Eurolaser LCS XL-1600

Niemcy

2010

używany

na żądanie

INNO31044

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible.

Wiertarka

Alzmetall Abomat 50

Niemcy

1987

używany

na żądanie

INNO31042

Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible.

Piec komorowy

Rohde KE 600 EW

Niemcy

nieznany

używany

na żądanie

INNO31040

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Szlifierka do zewnętrz wałków

Schaudt AR 1000

Niemcy

nieznany

używany

na żądanie

INNO31039

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Tokarka

Antonio Anselmi monoFap 260 EA

Niemcy

nieznany

używany

na żądanie

INNO31038

A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.

Stacja mieszania

Cavicchi 180RC

Niemcy

1991

używany

na żądanie

INNO31037

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

Maszyna do testowania kierownic

Urt

Niemcy

2018

używany

na żądanie

INNO31036

A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx. 1600mm/1800mm/2200mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Szlifierka do cięcia na mokro

Harald Baumgarten/sema Systemtechnik TM 400S

Niemcy

2014

używany

na żądanie

INNO31035

A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026.

Nożyce gilotynowe

Helmut Lotze 252.4000x5

Niemcy

1991

używany

na żądanie

INNO31033

Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.

Maszyna do cięcia z laserem CNC

Bystronic ByStar 4020

Niemcy

2008

używany

na żądanie

INNO31032

A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.

Prasa hydrauliczna

Müller SDZ 63.1.1

Niemcy

1978

używany

na żądanie

INNO31030

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

Komora do testów w mgle solnej

Köhler HKT 1000

Niemcy

2009

używany

na żądanie

INNO31028

A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions X/Y/Z: approx. 2100mm/1400mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Przenośnik taśmowy

Kittner 8300-600

Niemcy

2009

używany

na żądanie

INNO31025

A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.

Autoklaw

Bosch/sbm ADV ADV 12 09 12/2

Niemcy

2015

używany

na żądanie

INNO31022

A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible.