Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [2101 - 2120 of 3055]

Cnc wiertarka obrotowa

Rottler Portal 7000

Niemcy

2007

używany

na żądanie

INNO28447

Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.

Tokarka karuzelowa CNC

Rem SC50-70

Niemcy

nieznany

używany

na żądanie

INNO28446

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

Bobiniarka i przewijarka rolek

Sml W2000

Niemcy

2016

używany

na żądanie

INNO28439

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

Frezarka narzędziowa

Geldmacher UWF 405

Niemcy

nieznany

używany

na żądanie

INNO28438

Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible.

Cnc maszyna do nawijania sprezyn

Bb Spring (babbio) CNC 800

Niemcy

1995

używany

na żądanie

INNO28437

A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available.

Prasa ekscentryczna

Künstner & Hampel

Niemcy

1968

używany

na żądanie

INNO28418

An old Künstner & Hampel eccentric press is available. Pressure capacity: 25 tons, power requirement: 2.5 HP. On-site inspection is possible.

Maszyna do obróbki blachy

Niemcy

nieznany

używany

na żądanie

INNO28412

A sheet metal folding machine including a roller conveyor with digital length cutting is available. An on-site inspection is possible.

Depaletyzator

Ett FA-H 24

Niemcy

1992

używany

na żądanie

INNO28411

An ETT depalletizing machine is available. The machine is suitable for 0.1l small spirit bottles. Packaging capacity: 10000 bottles/h, pallet formats: 1000mm/1200mm, connected load: 3.5kW, compressed air: 6bar, air requirement: 14l/carton, machine dimensions X/Y/Z: approx. 1800mm/3000mm/2400mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Ploter

Oce-nederland 4015

Niemcy

nieznany

używany

na żądanie

INNO28409

An Oce DIN A0 tracing machine is available. Machine dimensions X/Y/Z: approx. 1400mm/1100mm/800mm. On-site inspection is possible.

Kompresor tłokowy

Alup CK

Niemcy

nieznany

używany

na żądanie

INNO28408

Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible.

Przenośna nagrzewnica olejowa

Kroll GP 45

Niemcy

nieznany

używany

na żądanie

INNO28407

Heating output: 42.8kW, tank capacity: 51l, fuel: heating oil, oil consumption: 3.63kg/h, blower output: 1600m³/h. An on-site inspection is possible.

Zbiornik ze stali nierdzewnej

Thrun 5000

Niemcy

2002

używany

na żądanie

INNO28404

Volume: 5000l, permissible operating temperature: 80°C. On-site inspection is possible.

Ploter

Hp DesignJet 600

Niemcy

nieznany

używany

na żądanie

INNO28401

Print technology: Thermal inkjet, max. print width: 914mm, print resolution: 600dpi, media types: Plain paper, coated paper, transparencies. Documentation available. On-site inspection is possible.

System przenośników granulatu

Mischboy/karl W. Müller 500 A 3/SD-600

Niemcy

nieznany

używany

na żądanie

INNO28400

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

Disolwer kadziowy

Niemann/vollrath/pendraulik NLD I/VDSVY 15/VDSVY 40/WDV 10

Niemcy

1995

używany

na żądanie

INNO28399

Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible.

Młyn perełkowy

Drais DCP-Superflow 170 C

Niemcy

1995

używany

na żądanie

INNO28398

A high-performance Drais bead mill for the chemical-cosmetic industry is available. Flour chamber volume: 15l, operating temperature: 98°C, speed: 1470rpm, flow rate: 2500l/h, power: 45kW. On-site inspection is possible.

Prasa do głębokiego tłoczenia

Mammut BSX-11

Niemcy

2021

używany

na żądanie

INNO28390

A Mammut trimming machine in mint condition for the further processing of drawn and pressed parts including welding device is available. Operating hours: 444h. Including welding device CEA BSW 50, documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Mazak FH 6800

Niemcy

1999

używany

na żądanie

INNO28382

Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible.

Wykrawarka

Helmerding KDH 100

Niemcy

1997

używany

na żądanie

INNO28380

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Linia do powlekania

Wmv TA700

Niemcy

1996

używany

na żądanie

INNO28379

A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible.