Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1861 - 1880 of 2789]

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

Mobile Crane

Demag LK 910/483-V

Germany

1972

used

on request

INNO27996

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

Electric Pedestrian Forklift Truck

Genkinger EGG 20/31 I

Germany

2019

used

on request

INNO27994

Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.

Cross Belt Grinding Machine

Linden Machines B.v. MC/QB-900

Germany

1990

used

on request

INNO27986

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Bulldozer

Liebherr PR 722 BL

Germany

1995

used

on request

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

CNC Profile Machining Center

Tekna TK 426/3

Germany

1998

used

on request

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Ultrasonic Welding System

Telsonic/ Amtek Gmbh

Germany

2014

used

on request

INNO27967

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

Compressed Air Tank

Atlas Copco

Germany

2020

used

on request

INNO27966

Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.

Ultrasonic Welding System

Telsonic/ Maschinenbau Raab TSP-3000-1P

Germany

2010

used

on request

INNO27965

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

Ultrasonic Welding System

Telsonic/ Ansotec ULTRASONIC USP 3000

Germany

2009

used

on request

INNO27963

Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.

Textile Dryer

Ernst Reinhardt 11/2/1621

Germany

1965

used

on request

INNO27958

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

Hot Stamping Machine

Baier 32/SV

Germany

2014

used

on request

INNO27948

A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible.

CNC Keyseating Machine

Balzat 32/300

Germany

1991

used

on request

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

CNC Spark EDM-Machine

Matra-fanuc TAPE-CUT-W1

Germany

unknown

used

on request

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Strapping Machine

Sander M.j. Maillis TZ/4

Germany

2003

used

on request

INNO27937

Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.

Surface Grinding Machine

Ziersch Gmbh ZT 820

Germany

2008

used

on request

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Can Making Machine

Eray Auto Lid UTM 10.B

Germany

2010

used

on request

INNO27922

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Hydraulic Press

Lauffer RPT 68

Germany

1987

used

on request

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.