Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
Innovac used-machines Latest Offers  [1541 - 1560 of 2594]
Injection-Moulding-Machine-Arburg-420C-1500 used
Injection Moulding Machine
Arburg 420C 1500
Germany
1999
used
on request
INNO27341
Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-420C-1000 used
Injection Moulding Machine
Arburg 420C 1000
Germany
2013
used
on request
INNO27340
Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-370S-600-100 used
Injection Moulding Machine
Arburg 370S 600-100
Germany
2012
used
on request
INNO27339
Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.
more
Injection-Moulding-Machine-Arburg-270S-350-100 used
Injection Moulding Machine
Arburg 270S 350-100
Germany
2012
used
on request
INNO27338
Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible.
more
Diatomaceous-Earth-Filter-Omodei-and-Mena-KFP-470-II used
Diatomaceous Earth Filter
Omodei & Mena KFP 470/II
Germany
unknown
used
on request
INNO27334
An Omodei & Mena yeast, grape and diatomaceous earth filter is available. Number of plates: 32, plate format: 500mm/500mm, thread: NW32, max. pressure: 1000bar. Including dry run protection.
more
CNC-Double-Spindle-Machining-Center-Stama-MC-536 used
CNC Double Spindle Machining Center
Stama MC 536
Germany
2009
used
on request
INNO27333
Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.
more
Conveyors-Profipack-Gebinde-Höhenförderer used
Conveyors
Profipack Gebinde- Höhenförderer
Germany
2009
used
on request
INNO27326
Two identical Profipack container height conveyors are available. Capacity: 25 cycles/min for 6, 8 and 12 packs, dimensions X/Y/Z: approx. 1100mm/1000mm/4100mm.
more
CI-Flexo-Press-Printplas-1200-6CI used
CI Flexo Press
Printplas 1200-6CI
Germany
2018
used
on request
INNO27322
Number of colors: 6, film passage width: 1250mm, print width: 1200mm, print length min./max.: 300mm/900mm, max. print speed: 200m/min, dimensions X/Y: approx. 9000mm/3600mm. Including anilox rollers and Rossini impression cylinder sleeves with the required gears. Documentation available. An on-site inspection is possible.
more
Blow-Moulding-Machine-Sig-Corpoplast-Blomax-12 used
Blow Moulding Machine
Sig Corpoplast Blomax 12
Germany
2008
used
on request
INNO27319
A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.
more
Lathe-Meuser used
Lathe
Meuser
Germany
1959
used
on request
INNO27318
A Meuser lathe including various holders, 3-jaw chuck and center punch is available.
more
CNC-Lathe-Colchester-Alpha-Cat used
CNC Lathe
Colchester Alpha Cat
Germany
1985
used
on request
INNO27317
Turning diameter over bed/face slide: 560mm/370mm, turning length: 2000mm, spindle bore: 90mm, speed: 1800rpm, dimensions X/Y/Z: approx. 3800mm/1700mm/2100mm, weight: approx. 3300kg, control: Bosch CNC Alpha 2000/2, operating hours: 60000. Including various holders, 3- and 4-jaw chucks.
more
Foil-Cutting-Machine-Trapo used
Foil Cutting Machine
Trapo
Germany
2020
used
on request
INNO27315
A film cutting machine with a handling portal from Trapo is available. Electrical components of the machine are available. However, the controls and the gripper of the handling portal are not available.
more
CNC-Machining-Center-Axa-VSC-1 used
CNC Machining Center
Axa VSC 1
Germany
1988
used
on request
INNO27313
Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.
more
Fully-Automatic-X-Ray-Inspection-Anritsu-XR75 used
Fully Automatic X-Ray Inspection
Anritsu XR75
Germany
2018
used
on request
INNO27312
A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.
more
Vacuum-Lifter-Schmalz-SCH500-EVE-TR-4 used
Vacuum Lifter
Schmalz SCH500/EVE-TR 4
Germany
2012
used
on request
INNO27311
A crane with a vacuum lifter Schmalz is available. Vacuum pump: Speed: 3300 rpm, power requirement: 0.21 kW, pumping speed: 4.7 m³/h, suction pressure: 850 mbar. Crane: Load capacity: 200kg.
more
Hot-Air-Welding-Machine-Vetron-Typical-5374 used
Hot Air Welding Machine
Vetron Typical 5374
Germany
2021
used
on request
INNO27304
A Vetron Typical hot-air welding machine for continuous seam sealing is available. Heating power: 700W, max. welding speed: 12m/min, material thickness: 0.2mm/20mm, air temperature range: 20°C-600°C, air volume: 50l-450l/min, weight: approx. 50kg. Documentation available. On-site inspection is possible.
more
Hydraulic-Testing-System-Niehues-DN200-DN600 used
Hydraulic Testing System
Niehues DN200-DN600
Germany
2019
used
on request
INNO27302
A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.
more
Universal-Milling-Machine-Deckel-FP4MA used
Universal Milling Machine
Deckel FP4MA
Germany
1990
used
on request
INNO27298
Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible.
more
Pallet-Magazine-J.-Horstmann-PALMA-812 used
Pallet Magazine
J. Horstmann PALMA 812
Germany
2014
used
on request
INNO27295
A J. Horstmann pallet magazine is available. Pallet type: Euro pallets, pallet dimensions X/Y: 1200mm/800mm, number of pallets: 15, documentation available. On-site inspection is possible.
more
Punch-Press-Edel-Stanzprofi-400 used
Punch Press
Edel Stanzprofi 400
Germany
unknown
used
on request
INNO27294
Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.
more
Innovac Gebrauchtmaschinen Our Program
Agricultural-machines 2
Automation-technology 65
Beverage-filling-technology 30
Complete-production-lines 1
Construction-machinery 23
Energy-management 123
Food-processing-and-beverage 137
Material-storage 71
Materials-handling-technology 64
Measurement-and-testing 62
Medical-equipment 7
Metal-processing-machines 998
Mining 2
Office-equipment 2
Other-machines 70
Packaging-machines 222
Pharmaceutical-and-cosmetics 16
Plastics-processing-machines 180
Printing-machines 77
Process-equipment-and-chemistry 148
Packaging-material-machinery 71
Robotics 34
Surplus-goods 6
Textile-machinery 81
Utility-vehicles 12
Woodworking-machines 90