Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1501 - 1520 of 3028]

CNC Machining Center

Dmg DMU 80 T

Germany

unknown

used

on request

INNO30006

A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible.

Crushing Plant

Remax CR 810

Germany

2015

used

on request

INNO30005

A crawler-mounted crushing plant Remax including a land conveyor system is available. 1) Double roll crusher Remax CR 810 Hybrid, year of manufacture: 2015, operating weight: approx. 230t, conveyor belt width: 1600mm, conveyor belt length: 12200mm, discharge belt type: Mobcon, discharge belt width: 1400mm, discharge belt length: 40m, feed hopper volume: approx. 30m², feed hopper length: 4500mm, feed hopper width: 6000mm. Including plate conveyor (1.8m/9.5m) with crawler track, cleaning conveyor (2m/5.3m), transfer station (1800mm/1800mm), electrical equipment and control. 2) Two-part land conveyor system, year of manufacture: 2015, width: 1400mm, belt speed: 1.5m/s, conveying capacity: approx. 1000t/h, length 1/2: 190m/165m. The enclosure of the land conveyor system is only partially available. Documentation available. An on-site inspection is possible.

CNC Machining Center

Takumi V 11

Germany

1998

used

on request

INNO30001

Travel X/Y/Z: 1100mm/550mm/560mm, tool holder: BT40, spindle speed: 6000rpm, tool positions: 24, control: Mitsubishi. Documentation available. An on-site inspection is possible.

Band Saw

Kasto Twin A5

Germany

2007

used

on request

INNO30000

Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.

Doubler-Sided Grinding and Polishing Machine

Bottero 222L

Germany

2018

used

on request

INNO29999

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

Flat Bed Die Cutter

Ueda Shiko Kikai Uniplaten U-1400

Germany

1986

used

on request

INNO29998

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

Press Brake

Durma/knuth APH 1335

Germany

1993

used

on request

INNO29997

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Suction Unit

Lta DF 300 Jet

Germany

2018

used

on request

INNO29996

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Decoiling System

Dimeco 1690 Opti-Master & Simo-Star

Germany

2008

used

on request

INNO29995

A Dimeco Alipress coil-to-sheet line with decoiler, straightener, and shear is available. Sheet width range: 200mm-1300mm, sheet thickness range: 1mm-7mm, cross-section range: 1400mm²-3250mm², max. feed speed: 30m/min, max. stroke rate: 150/min, max. material feed: 1000mm/stroke, straightener: Schechtl MSB100. Documentation available. An on-site inspection is possible.

Punching Line

Finn-power F5S

Germany

2001

used

on request

INNO29994

Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.

Press Brake

Beyeler PR 10

Germany

2001

used

on request

INNO29993

Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.

Plasma System

Plasma Finish V15-G

Germany

2000

used

on request

INNO29989

A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Compressor

Kaeser CSD 122 SFC

Germany

2007

used

on request

INNO29986

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

CNC Table Drilling Machine

Toshiba BTD13F-R22

Germany

2002

used

on request

INNO29985

Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China.

CNC Turning- and Milling Center

Mazak Integrex e-500H II (1500)

Germany

2006

used

on request

INNO29984

A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

CNC Internal Grinding Machine

Okamoto IGM 15 NC III

Germany

2014

used

on request

INNO29983

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

CNC Machining Center

Dmg Mori HSC 55 linear

Germany

2009

used

on request

INNO29982

Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.

Radial Drilling Machine

Stankoimport 2H55

Germany

1973

used

on request

INNO29980

Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.

Remaining Stock

Eisele/magnetor VMS/PS50R

Germany

1973

used

on request

INNO29979

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Film Wrapping Packaging Machine

Avt 300-FF/XX°-FB

Germany

unknown

used

on request

INNO29977

An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible.