Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1481 - 1500 of 3028]

CNC Lathe

Emco Turn 345

Germany

1998

used

on request

INNO30052

Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.

Mandrel Bending Machine

Sommer S65

Germany

unknown

used

on request

INNO30047

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

Milling Head

Pfauter-gleason Genesis 130 H/P200/PE250

Germany

unknown

used

on request

INNO30045

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

CNC Vertical Machining Center

Stama MC 520

Germany

1994

used

on request

INNO30044

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Press Brake

Knuth AHK 3180

Germany

2005

used

on request

INNO30043

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Air Purifier

Crt Roomguard RG01

Germany

2020

used

on request

INNO30041

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Weaving Machine

Dornier HTV8-SD

Germany

1991

used

on request

INNO30040

A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible.

Lasagna Sheet Inserter

Pavan R/PS

Germany

2001

used

on request

INNO30038

Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible.

CNC Machining Center

Fritz Werner TC 800

Germany

1984

used

on request

INNO30037

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Drying Facility

B+b FH50/150V

Germany

2008

used

on request

INNO30036

A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible.

Suction and Filtering System

Krämer VFM-P/VKA-P/VFM-R/GFS Shake 160 25 250

Germany

2009

used

on request

INNO30034

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Vacuum Machine

Multivac C370

Germany

2011

used

on request

INNO30031

A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Single Flank Testing System

Gleason 13-Zoll Power Gear T.

Germany

2005

used

on request

INNO30030

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Screening Machine

Schinke

Germany

unknown

used

on request

INNO30029

A plastic laser sintering unit is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. An on-site inspection is possible.

Center Lathe

Matra DLZ 630

Germany

unknown

used

on request

INNO30021

Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

3D Metal Printer

Markforged/lömi Metal X/Sinter II

Germany

2021

used

on request

INNO30016

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. Including two additional FDM printing systems Markforged Onyx One and MarkTwo. Documentation available. An on-site inspection is possible.

Agitators

Behälter Kg/prg/ika R112M-6/RF 04-T-1085

Germany

2019

used

on request

INNO30015

A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.

Drying and Warming Cabinet

Binder ED 400/KBF 115

Germany

unknown

used

on request

INNO30014

Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.

Cleaning Robot

Cleanfix RA 660 Navi

Germany

unknown

used

on request

INNO30009

Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.

Tumbler

Glass Gmbh VSM 300

Germany

1994

used

on request

INNO30008

Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.