Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1561 - 1580 of 2654]

Ultrasonic Welding System

Telsonic/ Maschinenbau Raab TSP-3000-1P

Germany

2010

used

on request

INNO27965

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

Ultrasonic Welding System

Telsonic/ Ansotec ULTRASONIC USP 3000

Germany

2009

used

on request

INNO27963

Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.

Textile Dryer

Ernst Reinhardt 11/2/1621

Germany

1965

used

on request

INNO27958

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

Tube Filling System

Gustav Obermeyer TUFÜBA 40 PE

Germany

2006

used

on request

INNO27951

A Gustav Obermeyer tube filling machine including a SpeMaBa labeler is available. Filling capacity: 15-20 tubes/min, hopper volume: 40l, dosing piston diameter: 35mm (10cm³-100cm³), tube format: 30mm/150mm, tube material: HDPE/LLDPE, tube diameter range: 5mm-90mm, tube length range: 65mm-240mm. Printing system: Allen NX 4 (ITW-Diagraph), processed labels: 80mm/77mm, printing: thermal transfer, printing foil: N508SW110 x 600 (Novexx), labeling machine: BBK Rapid SR 160/610-3800 S. Documentation available. On-site inspection is possible.

Hot Stamping Machine

Baier 32/SV

Germany

2014

used

on request

INNO27948

A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible.

CNC Keyseating Machine

Balzat 32/300

Germany

1991

used

on request

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

CNC Spark EDM-Machine

Matra-fanuc TAPE-CUT-W1

Germany

unknown

used

on request

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

Strapping Machine

Sander M.j. Maillis TZ/4

Germany

2003

used

on request

INNO27937

Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.

Surface Grinding Machine

Ziersch Gmbh ZT 820

Germany

2008

used

on request

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

Tea Bag Packaging Machine

Fr. Hesser

Germany

1958

used

on request

INNO27924

An old Hesser tea bag packaging machine is available. This machine is part of the German industrial and production history. Production capacity: approx. 1500/h, machine dimensions including multihead weigher X/Y/Z: approx. 4700mm/4200mm/3000mm, weight: approx. 2500kg. Including multihead weigher and accessories. On-site inspection is possible.

Can Making Machine

Eray Auto Lid UTM 10.B

Germany

2010

used

on request

INNO27922

A fully automatic Eray transparent round can machine with Rinco ultrasonic sealer for the production of plastic-based transparent round cans for the food and beverage industry is available. Dosing capacity: approx. 800-1200/h, can diameter min./max.: 50.8mm/180mm, can height min./max.: 55mm/328mm, crimping per side: 6mm, max. cutting length: 340mm. Available diameters: SET 1: 50.8mm/80mm/110mm/150mm/180mm, SET 2: 65mm/95mm/125mm/160mm. Components: 1) Ultrasonic welding machine, 2) Cylinder box binding machine, 3) Ultrasonic box sole welding machine. Including accessories, crimping disks, contour wheels from a diameter of 50.8mm and length 340mm, oval module for oval cans built in-house in 2015 and 2x Lanico V 110 S can seaming machine for tin bottoms, built in 2012. Total system dimensions X/Y/Z: approx. 6000mm/2500mm/2000mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Hydraulic Press

Lauffer RPT 68

Germany

1987

used

on request

INNO27919

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

Guillotine Shear

Georg Eckart

Germany

1990

used

on request

INNO27915

An old GEKA (Georg Eckart) guillotine shear is available. The emergency stop of the machine is defective. On-site inspection is possible.

CNC Machining Center

Heller MCH 250

Germany

2006

used

on request

INNO27911

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025.

Labelling Machine

E-packaging Saturno

Germany

2020

used

on request

INNO27910

A Labelling Machine E-Packaging S.r.l. for bottling lines, including a printing system, is available. Max. Speed: 20m/min, label length: 500mm, label width: 10-140mm, product height: 30-150mm. The machine was stored and not used, has therefore not been serviced, no known defects, documentation available. An on-site inspection is possible.

Tipping and Sorting System

Skako/ventzki 50D/NEE 511-111-S

Germany

2013

used

on request

INNO27909

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

Dry Evaporator

Pp-tec 3000M

Germany

2023

used

on request

INNO27907

Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.

Liquid Gas Tank

Kadatec

Germany

2022

used

on request

INNO27906

Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.

Stirrup Bending Machine

Mep Macchine Elettroniche Piegatrici System N

Germany

1997

used

on request

INNO27902

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

Flame Cutting Machine

Esab SUPRAREX SXE-P (D)

Germany

1999

used

on request

INNO27891

Track height: 500mm, track length: 14,000mm, cutting length: 12,000mm, cutting width: 3000mm, cutting thickness: 150mm, table height: 700mm, connected load: 2kVA, length: 2250mm, height: 1900mm, width: 5270mm, weight: 2.5t. The machine is not functional, but mechanically in order. The computer still runs under Windows XP and needs a new program. With documentation, without accessories. On-site inspection is possible.