Used machines Germany - Innovac GmbH

Point-Rolling Machine

Krollmann Nowa 3/S

Germany

1991

used

on request

INNO31049

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

more

Wire Straightening and Cutting Machine

Wafios R 31

Germany

unknown

used

on request

INNO31047

A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible.

more

Heat Exchanger

Alfa Laval E 110/E 210

Germany

2009

used

on request

INNO31046

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

more

Cooling System

Green Box Twin 26/HP

Germany

2012

used

on request

INNO31045

An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.

more

CNC Laser Cutting Machine

Eurolaser LCS XL-1600

Germany

2010

used

on request

INNO31044

A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2017. Documentation available. An on-site inspection is possible.

more

Drilling Machine

Alzmetall Abomat 50

Germany

1987

used

on request

INNO31042

Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible.

more

Chamber Furnace

Rohde KE 600 EW

Germany

unknown

used

on request

INNO31040

A Rohde chamber kiln is available. Volume: 600l, max. temperature: 1000°C, internal dimensions X/Y/Z: 710mm/870mm/920mm, power: 40kW, insulation layers: 2, heating directions: 4, heating element: grooved refractory brick. Machine dimensions X/Y/Z: approx. 1100mm/1500mm/2300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

more

External Cylindrical Grinding Machine

Schaudt AR 1000

Germany

unknown

used

on request

INNO31039

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

more

Lathe

Antonio Anselmi monoFap 260 EA

Germany

unknown

used

on request

INNO31038

A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.

more

Mixing Station

Cavicchi 180RC

Germany

1991

used

on request

INNO31037

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

more

Steering Wheel Testing Machine

Urt

Germany

2018

used

on request

INNO31036

A test station for steering wheel testing is available. Workpiece: steering wheels, operating pressure: 6bar, test processes: ALDW/heating mat resistance/horn contact force measurement/horn contact travel measurement. Machine dimensions X/Y/Z: approx. 1600mm/1800mm/2200mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

more

Guillotine Shear

Helmut Lotze 252.4000x5

Germany

1991

used

on request

INNO31033

Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.

more

CNC Laser Cutting Machine

Bystronic ByStar 4020

Germany

2008

used

on request

INNO31032

A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026.

more

Hydraulic Press

Müller SDZ 63.1.1

Germany

1978

used

on request

INNO31030

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

more

Salt Spray Chamber

Köhler HKT 1000

Germany

2009

used

on request

INNO31028

A Köhler salt spray chamber for corrosion testing of materials and components is available. Test chamber volume: 1000l, temperature constancy: +/-1K, water pressure range: 2.5bar-5bar, internal dimensions X/Y/Z: 1250mm/950mm/760mm, machine dimensions X/Y/Z: approx. 2100mm/1400mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

more

Belt Conveyor

Kittner 8300-600

Germany

2009

used

on request

INNO31025

A Kittner food conveyor is available. Width: 600mm, total length: 8300mm, motor power: 370W, belt speed: 6.6m/min, angle: 31.5°, conveying height: 3300mm. Documentation available. An on-site inspection is possible.

more

Autoclave

Bosch/sbm ADV ADV 12 09 12/2

Germany

2015

used

on request

INNO31022

A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible.

more

Granules Dryer

Arburg Thermolift 100-2

Germany

1999

used

on request

INNO31018

An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible.

more

Blow Cleaning Machine

Munder M-Air-217-1400

Germany

2019

used

on request

INNO31017

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

more

Truck

Man ME 18.250

Germany

2004

used

on request

INNO31014

A MAN truck including a rear-mounted loader crane Palfinger PK 7501 is available. Engine power: 184kW, displacement: 6871cm³, fuel: diesel, wheel and tire size: 265/70 R 19.5, crane type: hydraulic knuckle boom loader crane, max. lifting capacity: 5400kg, reach: 13800mm, max. inclination: 20°. Documentation available. An on-site inspection is possible.

more