Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1081 - 1100 of 3074]

Laminar Flow Unit

Bleymehl Flora-DF III-965

Germany

2005

used

on request

INNO31080

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

CNC Vertical Machining Center

Chiron FZ 12 L

Germany

1991

used

on request

INNO31076

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

CNC Press Brake

Weinbrenner GP 125

Germany

1986

used

on request

INNO31075

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Wind Turbine

Vestas V52-MK3

Germany

2005

used

on request

INNO31074

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

Mixing System

Wam WBHP 15000

Germany

2013

used

on request

INNO31072

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

Filling and Sealing Machine

Hamba BF 5012/2-Glas

Germany

1992

used

on request

INNO31071

A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Cup Filling Machine

Gasti

Germany

unknown

used

on request

INNO31070

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

CNC Travelling Column Maching Center

Matec 30L

Germany

2000

used

on request

INNO31069

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

Cleaning System

Mea L160

Germany

1998

used

on request

INNO31068

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

Labelling Machine

Khs/anker Roland 10/4

Germany

2009

used

on request

INNO31067

A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible.

CNC Lathe

Eguro Nuclet-10A

Germany

1995

used

on request

INNO31066

A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.

Gantry Crane

Teichmann

Germany

2014

used

on request

INNO31064

A single-girder gantry crane newly built and converted in 2014 by Teichmann is available. Load capacity: 5000kg, track center distance: 6000mm, lifting height: 6000mm, crane travel length: 3000mm, trolley: monorail underhung trolley, hoisting speed: 5m/min, trolley travel speed: 20m/min, crane travel speed: 20m/min. Documentation available. An on-site inspection is possible.

Mixer

Eirich R15/ RV 15

Germany

1996

used

on request

INNO31062

Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.

CNC Milling Machine

Haas VF-3

Germany

1997

used

on request

INNO31058

A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.

Assembly Station

Nutek NTM 530 WSL-1500-3(S)

Germany

2013

used

on request

INNO31056

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

Vacuum Angle Valve

Leybold BAV DN800 ISO-F EP VA

Germany

unknown

used

on request

INNO31055

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

Welding Cell

Kuka/genius KR300-R2500/KR60-3/HWI408

Germany

2017

used

on request

INNO31054

Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible.

CNC Lathe

Doosan Puma 240 MS

Germany

2006

used

on request

INNO31053

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

Suction and Filtering System

Ivat Profi-Tower RS 28.000K

Germany

2019

used

on request

INNO31051

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Dump Truck

Faun K 35.5

Germany

1982

used

on request

INNO29368

Engine: Klockner Humboldt Deutz F12L413F, power: 282kW, torque: 1227Nm, cylinders: 12, displacement: 19144cm³. Speed: 55km/h, wheels: 6, skip capacity painted/heaped: 15.3m³/21.1m³. Unladen weight: approx. 23000kg, payload: 32000kg, total weight: approx. 55000kg, machine dimensions X/Y/Z: approx. 7750mm/3650mm/3600mm, operating hours: 10990h. The tipper got new tires from Bridgestone in 2019. Documentation available. On-site inspection is possible.