Used machines Germany - Innovac GmbH

Boiler

Viessmann SX1

Germany

unknown

used

on request

INNO28473

Heat output: 225kW, water volume: 399l, operating overpressure: 4bar, flow temperature: 120°C, heating medium: natural gas. On-site inspection is possible.

more

Hydraulic Aggregate

Hydropa WE 10 HG-F4M/QX 10

Germany

2005

used

on request

INNO28467

Pump type: QX 31-020/21-016/21-012 R, power: 5.5kW, flow rate: 29l+23l+18l/min, max. pressure: 3x40bar, oil viscosity: 32-46cSt, usable volume: 300l. On-site inspection is possible.

more

Carton Cutting Machine

Wupa 6.3

Germany

unknown

used

on request

INNO28464

Corrugation types: F/W/E/B/C, double corrugation types: FF/FE/FB/EB, gray board weight: 600g-1200g/m², board thickness range: 0.15mm-6mm, grammage capacity: 180g-1200g/m², min. sheet size: 590mm/700mm, max. sheet size: 1015mm/1410mm, blade size X/Y: 995mm/1390mm, sheet start to 1st blade: 15mm. Documentation available. On-site inspection is possible.

more

Enveloping Machine

Neopost E2430ZZ

Germany

unknown

used

on request

INNO28459

Production capacity: 5500 envelopes/h, feeding stations: 3 standard/1 special, document feeder: 500 sheets, envelope feeder: 800 envelopes, folding types: single fold/corrugated fold/Z-fold/double parallel fold/without fold, max. folding capacity: 8 sheets. Document dimensions X/Y min./max.: 140mm/140mm-229mm/406mm, envelope dimensions X/Y min./max.: 89mm/152mm-165mm/264mm, max. insert thickness: 4mm, max. typesetting thickness: 6mm. On-site inspection is possible.

more

Paper Belt Filter

Ame PS 150

Germany

2024

used

on request

INNO28456

A brand new AME belt filter system for continuous cleaning of cooling lubricants (e.g. emulsions, oils) using the gravity principle is available. Emulsion capacity: 150l/min, oil capacity: 90l/min, tank volume: 800l, machine dimensions X/Y/Z: approx. 1900mm/1000mm/1300mm, weight: approx. 410kg. Documentation available. On-site inspection is possible.

more

Plate Shear

Weinbrenner 6/3050

Germany

1970

used

on request

INNO28455

Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.

more

Rotary Transfer Machine

Elmeg RT VD

Germany

1974

used

on request

INNO28454

Voltage: 220V/380V, frequency: 50Hz, power: 250W, cycle rate: 3600 cycles/h. On-site inspection is possible.

more

Single Column Eccentric Press

Franz Berrenberg LEPr. 45/220

Germany

1970

used

on request

INNO28453

Pressing force: 45t, cutting area: 1000mm², stroke adjustment: 20mm-100mm, ram adjustment: 45mm, stroke rate: 60 strokes/min, table dimensions X/Y: 730mm/500mm, opening in table: 180mm/180mm, table height: 710mm, ram area: 350mm/220mm. On-site inspection is possible.

more

Eccentric Press

Boettcher & Brückmann ERL 160t

Germany

unknown

used

on request

INNO28452

Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible.

more

Pipe Welding System

Uhrhan & Schwill Innenschweißen

Germany

2013

used

on request

INNO28451

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, workpiece inner diameter min./max.: 600mm/4500mm, max. workpiece length: 12700mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

more

Pipe Welding System

Uhrhan & Schwill Außenschweißen

Germany

2013

used

on request

INNO28450

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

more

Bending System

Löcher/faccin/asdorfer Giotto 3000/HY1500

Germany

unknown

used

on request

INNO28448

A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Preheating furnace holes, machine dimensions X/Y/Z: approx. 1500mm/500mm/22000mm. 2) Faccin conveyor belt, length: 22000mm. 3) Ring bending machine Faccin Giotto 3000. 4) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 5) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible.

more

CNC Vertical Rotary Indexing Drilling Machine

Rottler Portal 7000

Germany

2007

used

on request

INNO28447

Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.

more

CNC Turret Lathe

Rem SC50-70

Germany

unknown

used

on request

INNO28446

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

more

CNC Double Spindle Lathe

Mazak MP-6200 Y

Germany

2001

used

on request

INNO28443

A Mazak CNC double-spindle lathe is available. Chuck diameter: 8 inch, max. swing diameter: 320mm, max. machining length chuck workpiece/shaft workpiece: 180mm/530mm, max. bar diameter: 51mm, speed: 5000rpm, rated power: 22kW. Traverse path X: 240mm, traverse path Y: +/-50mm, traverse path Z left/right: 440mm/495mm, rapid traverse X1/X2: 30.5m/min, rapid traverse Z1/Z2: 33m/min. Tool positions: 12, speed of driven tools: 4500 rpm. Machine dimensions X/Y/Z: approx. 3600mm/2000mm/2100mm, weight: approx. 8000kg, control: Mazatrol 640T. Including Cut-Feeder 80, Knoll high-pressure system and some tool holders. Documentation available. On-site inspection is possible.

more

CNC Double Column Press

Wanzke HPV 100 F

Germany

1992

used

on request

INNO28442

Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible.

more

Sawing plant

Omp

Germany

2019

used

on request

INNO28441

An OMP pole sawing machine is available. The system is used to cut 6-meter bars in half. Documentation available. On-site inspection is possible.

more

Corona Pre-Treatment System

Afs AVE-250E

Germany

2019

used

on request

INNO28440

An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible.

more

Roll Cutting and Winding Machine

Sml W2000

Germany

2016

used

on request

INNO28439

A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible.

more

Tool Milling Machine

Geldmacher UWF 405

Germany

unknown

used

on request

INNO28438

Travel X/Y/Z: 400mm/300mm/400mm, speed: 2000rpm, spindle mount: SK40, feed: 380mm/min, rapid traverse X/Y/Z: 1200mm/min, table dimensions X/Y: 320mm/750mm, quill stroke: 80mm, milling head tilt: +/-90°. Machine dimensions X/Y/Z: approx. 1800mm/1200mm/1200mm, weight: approx. 1300kg. On-site inspection is possible.

more