Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1141 - 1160 of 2524]

Cobot

Hanwha Techwin HCR-5

Germany

2019

used

on request

INNO27857

A Hanwha Techwin collaborative robot is available. Axes: 6, reach: 915mm, payload: 5kg, repeatability: +/-0.1mm, collision detection: 25Nm-150Nm, weight: 21kg. Including platform (dimensions X/Y/Z: 780mm/700mm/910mm), suction pad, control unit and original packaging. Documentation available. On-site inspection is possible.

Coating Line

Rippert/maxon/weishaupt

Germany

2011

used

on request

INNO27855

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

Dough Cutting and Weighing Machine

Seewer/rondo Doge STC1 A0

Germany

2002

used

on request

INNO27853

Application: bread and pastry products, belt length: 1250mm, belt width: 610mm, dough thickness range: 0mm-35mm, dough weight range: 200g-2400g. On-site inspection is possible.

CNC Vertical Machining Center

Deckel Maho DMC 100 V

Germany

unknown

used

on request

INNO27851

Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15000rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12000kg. The machine has a damaged spindle. Documentation available. On-site inspection is possible.

Coordinate Measuring Machine

Keyence XM-1500

Germany

2018

used

on request

INNO27850

Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible.

Roller Coater

Hymmen TLX M

Germany

1990

used

on request

INNO27844

A roller coating machine specially designed for UV coating in the wood industry is available. Working width: 1350mm, max. workpiece thickness: 80mm, working height: approx. 980mm, application roller: 1350mm, feed speed: 5m-25m/min, machine dimensions X/Y/Z: approx. 2700mm/1200mm/1800mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Roller Coater

Bürkle DAL2 1300

Germany

1991

used

on request

INNO27843

Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.

Recoiler

Wanzke PM 1000/DC-S / PMS500-DC

Germany

1995

used

on request

INNO27840

Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible.

CNC Punching And Shearing Machine

Finn Power (prima Power) SG

Germany

2011

used

on request

INNO27839

Working range X/Y: 1500mm/3000mm, punching force: 30t, max. material thickness (punching): 8mm, max. working speed X/Y: 150m/min, tool stations: 21, multitool stations: 3, max. workpiece weight: 200kg, control: Siemens Sinumerik 840D. Including stacking unit (STS) and loading tower (Combo Tower). Documentation available. On-site inspection is possible.

Internal Cylindrical Grinding Machine

Jung C8

Germany

1969

used

on request

INNO27838

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

Multisensor Measuring Machine

Mahr MarVision MS662

Germany

unknown

used

on request

INNO27836

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

Laser Sorter

Best HELIUS

Germany

2008

used

on request

INNO27834

Sorting system for foreign object detection, suitable for salads and leafy vegetables, consists of two infeed vibrators and a sorting unit, compressed air connection: 10 bar, water connection: 3 bar, connected load: 3 kVA, with spare parts, has been regularly serviced by the manufacturer, on-site inspection is possible, not under power.

CNC Milling Machine

Maho MH 600E

Germany

1990

used

on request

INNO27829

Speed: 5000 rpm, machine dimensions X/Y/Z: approx. 3220mm/2120mm/2120mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 33494h. Documentation available. On-site inspection is possible.

Rack and Pinion Lift

Steinweg Böcker 500 Z

Germany

2002

used

on request

INNO27828

Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg SELECTA 1200T 800-150

Germany

2002

used

on request

INNO27826

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Hydraulic Press

Lauffer RMT 100

Germany

2002

used

on request

INNO27825

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Heavy-Duty Rack

Durige Lagertechnik

Germany

2008

used

on request

INNO27824

Includes (1) 12x upright 2C815-80x50, 1825mm, RAL-2001 red orange, max. load per pair: 2.26t (2) 352x upright 2X1115-110x50, 2700mm, RAL-2001 red orange, max. load per pair: 3.0t (3) 78x shelf frame M80 5500x1100mm, RAL-5003 sapphire blue, already dismantled, on-site inspection is possible.

Tube Bending Machine

Lang EL-HY 60 HY 70

Germany

2008

used

on request

INNO27822

Bending diameter (with tools): 42.4/ 45/ 50/ 55/ 60/ 63.5/ 70mm, weight: 2t, with tools and documentation, an on-site inspection is possible.

CNC Press Brake

Ermaksan AP 4100x120

Germany

1996

used

on request

INNO27821

Pressing force: 1200kN, working width: 4100mm, stand distance: 3550mm, table width: 215mm, throat depth: 400mm, stroke: 800mm, working speed: 80mm/s, power: 11kW, weight: approx. 12000kg. Dokumentation vorhanden. An on-site inspection is possible.

Milling Machine

Wabeco F1210E

Germany

unknown

used

on request

INNO27820

X-axis: 500mm, Y-axis: 150mm, Z-axis: 280mm, quill stroke: 55mm, throat depth: 185mm, table dimensions: 700x180mm, groove width: 12mm, weight: approx. 110kg, with base frame.