Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [421 - 440 of 3047]

Tokarki

K. Martin DLZ 502

Niemcy

1958

używany

na żądanie

INNO31661

Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement.

Chłodnica ssąca

Werner & Pfleiderer Aroma + Cooler AC

Niemcy

2009

używany

na żądanie

INNO31660

A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible.

Automat do owijania taśmą

Signode SBM 4300

Niemcy

2014

używany

na żądanie

INNO31659

A Signode plastic strapping machine is available. Load capacity: 35kg, arch dimensions X/Y: 1550mm/500mm, min. package width: 100mm, min. package height: 20mm, strap tension range: 40N-450N, strap quality: PP, strap width: 9mm/12mm, strap thickness range: 0.4mm-0.6mm, strap reel core diameter: 200mm, strap reel outer diameter: 430mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Wózek widłowy

Toyota/bt Reflex RR B7

Niemcy

2009

używany

na żądanie

INNO31657

An electric reach truck Toyota (BT) is available. Rated capacity: 2500kg, load center: 600mm, lift height: 8000mm, free lift: 2757mm, max. travel speed: 12km/h, gradeability with/without load: 12%/7%, wheelbase: 1600mm. Machine dimensions X/Y/Z: approx. 3200mm/1300mm/3350mm, weight: approx. 5000kg, operating hours: approx. 5438h. The battery of the machine was replaced in 2016. Documentation available. An on-site inspection is possible.

Maszyna do formowania, wypełniania i uszczelniania

Hugo Beck Flexo 500 S

Niemcy

2007

używany

na żądanie

INNO31656

A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.

Frezarka uniwersalna CNC

Maho MH 500 W

Niemcy

1991

używany

na żądanie

INNO31655

Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Krauss Maffei 650-5700 CM

Niemcy

1999

używany

na żądanie

INNO31654

A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible.

CNC Video-Messmikroskop

Garant MM2 CNC

Niemcy

nieznany

używany

na żądanie

INNO31653

X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible.

Dziewiarka

Karl Mayer Raschel RSE 4-1

Niemcy

2022

używany

na żądanie

INNO31652

Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible.

Dwustronna formatyzerka krawędzi

Ima FBA/II/260

Niemcy

1985

używany

na żądanie

INNO31651

An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Maszyna do układania

Mimot Advantage 27 BI

Niemcy

2008

używany

na żądanie

INNO31650

An SMT pick-and-place placement machine Mimot including feeders, board handling system Mimot Easytrans and additional accessories is available. Placement heads: 6, max. placement capacity: 14400/h, placement accuracy at sigma 4: +/-35mm, repeat accuracy at sigma 4: +/-10mm, angular accuracy at sigma 4: +/-0.07°, max. component dimensions X/Y: 55mm/55mm, min. pitch: 0.3mm, max. component height: 10mm. Machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2750kg. Including Mimot Easytrans, destacker/loader, conveyor units, inspection station, FIFO, unloader with evaluation, feeders, stick feeders, setup trolley and feeder trolley. Documentation available. An on-site inspection is possible. The system is now separated.

Centrum do cięcia strumieniem wody

Cms Idroline S 1730

Niemcy

2017

używany

na żądanie

INNO31649

A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible.

Taśma rozbiorowa

Westerhoff 10-Personen

Niemcy

2020

używany

na żądanie

INNO31647

A poultry cone cutting line from Westerhoff Geflügeltechnik GmbH is available. Number of operators: 10, cutting cones: 40, max. throughput capacity: 1000pcs/h, length: approx. 11000mm, width: approx. 2000mm. Including a platform for the operators. An on-site inspection is possible.

Giętarka obrotowa

Metallkraft MSBM 2520/35 Pro

Niemcy

2019

używany

na żądanie

INNO31646

Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.

Prasa do gięcia krawędzi

Hämmerle BM 200-3100

Niemcy

2001

używany

na żądanie

INNO31645

A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible.

5-osiowe centrum obróbcze CNC

Maka Systems Gmbh Moving Beam BC150t compact

Niemcy

nieznany

używany

na żądanie

INNO31644

A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment.

Tokarka cykliczna CNC

Boehringer VDF DUS 560

Niemcy

1992

używany

na żądanie

INNO31643

A universal CNC cycle lathe Boehringer is available. Center height: 280mm, swing diameter over bed/cross slide: 570mm/365mm, turning length: 1000mm, distance between centers: 1500mm, quill diameter: 80mm, quill travel: 190mm, spindle speed: 2500rpm, bed width: 360mm, rapid traverse X/Z: 5m/min/10m/min. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2400mm, weight: approx. 4000kg, control system: Siemens. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Krauss Maffei KM300-1900 C2

Niemcy

2000

używany

na żądanie

INNO31642

Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.

Linia do produkcji okien

Stürtz STBAZ/SE-HSM-25/SE-HSM-40/2MC/WST-30/FBS-1

Niemcy

2011

używany

na żądanie

INNO31641

A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible.

Tokarka CNC

Jungenthal Ju6-4D

Niemcy

nieznany

używany

na żądanie

INNO31640

A CNC vertical lathe Jungenthal is available. Gear stages: 2, max. speed: 160rpm, max. workpiece height: 800mm, chuck jaws: 6, faceplate diameter: 2000mm, motor power: 50kW, control: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible.