Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [21 - 40 of 3094]

Szlifierka płaska stołowa

Elb-schliff Rotary H6 STC

Niemcy

2011

używany

na żądanie

INNO32388

Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible.

Sucha kłowa pompa próżniowa

Busch MINK MM 1252 AV

Niemcy

2008

używany

na żądanie

INNO32387

There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg.

Maszyna do strzyżenia

F. M. Hämmerle

Niemcy

nieznany

używany

na żądanie

INNO32386

The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible.

Uniwersalna tokarka do obróbki końcówek

Tos Trencin SN 500S

Niemcy

1998

używany

na żądanie

INNO32385

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.

Nośnik form

Optitek F1 4060-600 800

Niemcy

2007

używany

na żądanie

INNO32384

Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.

Maszyna do ostrzenia brzeszczotów

Vollmer CNG

Niemcy

nieznany

używany

na żądanie

INNO32383

Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment.

Linia do produkcji stringerów ogniw słonecznych

Wuxi Autowell Technology ATW / MS30A-S

Niemcy

2018

używany

na żądanie

INNO32382

Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement.

Maszyna do formowania wtryskowego

Krauss Maffei KM 80-220 C2

Niemcy

1999

używany

na żądanie

INNO32381

Clamping force: 80t, 3-phase mains supply: 400V, 50Hz, total rated current: 130A, upstream fuse: 160A, max. motor current: 30A, an on-site inspection is possible. The machine is located in Hungary.

Szczotkarka

Löwer SM 500

Niemcy

1986

używany

na żądanie

INNO32380

Working width: 500mm, voltage/frequency: 380V/50Hz, total connected load: 18A. Inspection possible by prior arrangement.

Szlifierka szerokotaśmowa

Bütfering AWS C-E 1100

Niemcy

1996

używany

na żądanie

INNO32379

Max. working width: 1100mm, voltage/frequency: 400V/50Hz, current: 74A. Inspection by appointment possible.

Filtr kasetowy

Pall

Niemcy

1990

używany

na żądanie

INNO32378

A Pall cartridge filter housing for beer filtration is available. Filter cartridge positions: 19, cartridge length: 30in or 40in, adaptor code: 7, permissible operating pressure: 10bar, permissible operating temperature: 140°C, vessel volume: 136L. Included are 10 stainless-steel blanking plugs for the filter cartridge sockets and three Kieselmann ball valves. An on-site inspection is possible.

Instalacja z filtrami świecowymi

Pall SFG7194GNW80

Niemcy

1993

używany

na żądanie

INNO32377

A complete Pall cartridge filter unit with cleaning equipment is offered. Filter housing: Pall SFG7194GNW80, filter cartridge positions: 19, max. operating pressure: 10bar, max. operating temperature: 140°C, volume: 153l. 2) CIP tank: approx. 5hl, steam-heated. Including Hilge CIP pump, Pall water filter with 3 filter cartridges, complete piping, Kieselmann butterfly valves, digital Barby+Kühner thermometer, inlet and outlet pressure gauges as well as 10 stainless steel blind plugs for the cartridge mounts. Suitable for depth filter cartridges and membrane filter cartridges. An on-site inspection is possible.

Filtr ramowy

Seitz Orion 60A/60

Niemcy

1969

używany

na żądanie

INNO32376

Filter format: 600mm×600mm, throughput: approx. 45hl/h, number of plates: 17, number of frames: 16, number of end plates: 2, inlet and outlet pressure gauges: included, overall length: approx. 3200mm, overall width: approx. 800mm. The machine is equipped with all seals and is ready for use. An on-site inspection is possible.

Pionowe centrum obróbcze

Mazak VQC 15/40

Niemcy

1986

używany

na żądanie

INNO32375

A vertical CNC machining center is offered. X/Y/Z-axis travels: 560mm/410mm/381mm, spindle speed: 60-6000rpm, drive power: 3.7/5.5kW, table size: 410mm × 900mm, max. table load: 300kg, tool shank: ISO 40 (MAS-BT40), rapid traverse X/Y/Z: 24/24/18m/min, control: Mazatrol CAM M-2. Equipped with original parameter lists. Weight: approx. 4200kg, overall dimensions X/Y/Z: approx. 2300mm/2000mm/2641mm. The program is missing because the machine has been disconnected from power for several years. Documentation available. Inspection possible by appointment.

Tokarka CNC

Spinner TTC 300 42SMMCY

Niemcy

2010

używany

na żądanie

INNO32374

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

Obkurczarka foliowa

Kallfass Universa 5050

Niemcy

1998

używany

na żądanie

INNO32373

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Maszyna do sitodruku

Tic SFM-650 DHE

Niemcy

2021

używany

na żądanie

INNO32372

Supply voltage: 230V, current consumption: 1A. Including two printing tables, one vacuum table and one table without vacuum. The machine was used only lightly for approx. two years and is fully functional. Documentation available. An on-site inspection is possible.

Suszarka próżniowa

Maguire VBD-150

Niemcy

2017

używany

na żądanie

INNO32371

A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, frequency: 50Hz, current consumption: 9.7A. An on-site inspection is possible.

Składarka

Eurofold T 435

Niemcy

2008

używany

na żądanie

INNO32370

A Eurofold T 435 folding machine in need of repair with a second unit for cross folding is offered. Main machine: A3 folding machine with 4 folding plates, second folding machine: A3 with 2 folding plates. Equipment: electric A3 folding plate set, counting and spacing unit, A2/A3 pile feeder, A3 angled conveyor, standard machine table, electric stream delivery, Becker compressor 25ccm, electric cross-fold folding plate set, L roller conveyor and cross-fold machine table. Motor, pumps, blower and electronics are technically in working order. The polyurethane on the rollers has leaked out, so the rollers must be replaced. Documentation available. Inspection by appointment possible.

Centrum obróbcze CNC

Homag BOF 20/60/14/K

Niemcy

1996

używany

na żądanie

INNO32369

Working area X/Y: approx. 6000mm/1400mm, operating voltage: 380V, frequency: 50Hz, rated current: 60A, control voltage: 220V/24V. The machine is fully functional. An on-site inspection is possible.