Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1 - 20 of 2580]

Szlifierka taśmowa długa

Johannsen T84

Niemcy

nieznany

używany

na żądanie

INNO30124

A wide belt sanding machine (presumably Johannsen) is available. Working width: 150mm, sanding belt length: 7100mm, sanding belt width: 150mm, working height range: 0mm-150mm, table dimensions X/Y: approx. 3000mm/1000mm, sanding belt speed: approx. 20m/s, machine dimensions X/Y/Z: approx. 4000mm/1300mm/1800mm, weight: approx. 1000kg. An on-site inspection is possible.

Szlifierka powierzchniowa

Elb SWH 5 ND

Niemcy

1984

używany

na żądanie

INNO30122

Grinding dimensions X/Y/Z: 500mm/300mm/350mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76.2mm, magnetic table dimensions X/Y: 500mm/200mm, pole pitch: 5mm, machine dimensions X/Y/Z: approx. 3050mm/1600mm/2400mm, weight: approx. 3000kg. Including coolant system, paper band filter, sine table, digital display, and grinding wheel flange. Documentation available. An on-site inspection is possible.

Pozostałe zapasy

Siemens S7-1500/S7-300

Niemcy

nieznany

używany

na żądanie

INNO30121

A high-cube industrial container including two control cabinets, a twin-shaft shredder, and various conveying and transport systems is available as a package offer. 1) Industrial container with double-side opening and base frame. Contents: screw press discharge unit, hopper, vacuum drum, vacuum pump Atlas Copco DZS 300V, condensation unit, and various auxiliary electric motors. 2) Control cabinet with Siemens Simatic S7-1500 control system, control panel: Siemens KTP 700. 3) Control cabinet with Siemens Simatic S7-300 control system. 4) Industrial twin-shaft shredder, rotor shafts: 2, motor/gearbox: Brevini/Dana. 5) Conveying and transport system with an attached feeding unit. The container, its contents, and all listed units are part of a package offer. An on-site inspection is possible.

Maszyna do formowania, wypełniania i uszczelniania

Goglio GL 18/GLE B

Niemcy

1997

używany

na żądanie

INNO30120

A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.

System spawania na robotach

Cloos Rotomat II 350 Komp.

Niemcy

2005

używany

na żądanie

INNO30119

A welding system Cloos with two rotary tables and a suction unit is available. Electrical power: 35kVA, tilting torque: 1500Nm, rotary torque: 800Nm, max. load: 500kg, max. center of gravity distance: 500mm, control: Rotrol II, weight: approx. 600kg. Including a small cutting torch Cloos ESAB. Documentation available. An on-site inspection is possible.

Centrum tokarsko frezarskie CNC

Mazak Integrex 35

Niemcy

1998

używany

na żądanie

INNO30118

Turning diameter: 575mm, turning length: 1500mm, speed: 3300rpm, travel X/Z: 450mm/1500mm, travel Y: +/-90mm, rapid traverse: 12m/min, tool holder: SK40, tool positions: 40. Machine dimensions X/Y/Z: approx. 4400mm/2500mm/2500mm, weight: approx. 7500kg, control: Mazak Mazatrol PC-Fusion-CNC 34U MT. Including one LAS machine. An on-site inspection is possible.

Dziewiarka

Wilhelm Kneitz SiTnet

Niemcy

2010

używany

na żądanie

INNO30117

A Wilhelm Kneitz textile knitting system for the production of load securing fabrics is available. 1) Base machine Karl Mayer, year of manufacture: 2010, gauge: 1/6, output: approx. 350m²–500m²/8h, max. working width: 3250mm, installation area X/Y: 9000mm/9000mm, control: PGRS. Includes various wear parts and a new gearbox. 2) Base frame for a new machine with a working width of 8m. Includes all materials and finished goods currently in storage. It is likely that a frequency converter connected to the cutting system needs to be replaced. Documentation available. An on-site inspection is possible.

Linia do produkcji siatek budowlanych

Wilhelm Kneitz SITgrid

Niemcy

2007

używany

na żądanie

INNO30116

A glass and carbon roving production line (reinforcement mesh) Wilhelm Kneitz for the construction industry is available. 1) 3D production system consisting of two combined knitting machines Karl Mayer DG 6-30 2HS ELS, year of manufacture: 2007, working width: 2133.6mm, production capacity: approx. 800m²/8h, dimensions X/Y: approx. 8000mm/15000mm, weight: approx. 2600kg. 2) 2D production system consisting of one knitting machine Karl Mayer Cop HS 2-ST HG, gauge: 1/6inch, year of manufacture: 2012, working width: 2540mm, max. possible working width: 3505.2mm, dimensions X/Y: approx. 5500mm/8000mm, installation area X/Y: approx. 14000mm/18000mm. 3) Sample unit Karl Mayer Malimo 14022/PS-S2, year of manufacture: 1998, gauge: 1/6inch, optional gauge: 1/12inch, max. working width: 1270mm, installation area X/Y: 4000mm/6000mm, speed: approx. 800rpm. Documentation available. An on-site inspection is possible.

Podajnik baru

Iemca KID 80

Niemcy

2014

używany

na żądanie

INNO30115

A bar loading magazine Iemca is available. Bar length range: 250mm-1615mm, max. bar diameter: 80mm, magazine width: approx. 600mm, max. bar weight: 60kg, forward and return speed: 750mm/1000mm/s, weight: approx. 500kg. An on-site inspection is possible.

Podajnik baru

Fmb MINIMAG/4200/A

Niemcy

2002

używany

na żądanie

INNO30114

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Tokarka CNC

Okuma L270E

Niemcy

2001

używany

na żądanie

INNO30113

A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment.

Frezarka do kół zębatych

Pfauter P160 H/I

Niemcy

1970

używany

na żądanie

INNO30112

Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.

Przeciągarka

Frömag FSR6-800-MZB-PPC

Niemcy

2008

używany

na żądanie

INNO30111

A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.

Nożyce gilotynowe

Durmazlar SBT 3013

Niemcy

2013

używany

na żądanie

INNO30110

A guillotine shear Durma is available. Working width: 3100mm, max. sheet thickness: 13mm, stroke: 125mm, stroke rate: 13/min, oil capacity: 330l, machine dimensions X/Y/Z: approx. 4250mm/3850mm/2200mm, weight: approx. 11700kg. An on-site inspection is possible.

System niskiego napięcia

Siemens 4GD6164-3ZY

Niemcy

2013

używany

na żądanie

INNO30109

Two low-voltage systems consisting of two Siemens transformers and reactive power control units are available. 1) 3-phase dry-type transformer Siemens 4GD6164-3ZY, year of manufacture: 2013, power: 1250kVA, transformer dimensions X/Y/Z: approx. 3500mm/2400mm/3000mm, weight: approx. 3000kg, reactive power control unit dimensions X/Y/Z: approx. 1000mm/1000mm/3000mm, main low-voltage distribution dimensions X/Y/Z: approx. 3600mm/1000mm/3000mm, doors: 4. 2) 3-phase dry-type transformer Siemens 4GD6164-3ZY, year of manufacture: 2015, power: 1000kVA, transformer dimensions X/Y/Z: approx. 3500mm/2400mm/3000mm, weight: approx. 3000kg, reactive power control unit dimensions X/Y/Z: approx. 1000mm/1000mm/3000mm, main low-voltage distribution dimensions X/Y/Z: approx. 2400mm/1000mm/3000mm, doors: 3. Documentation available. An on-site inspection is possible. Individual sale possible.

Szlifierka

Elektra Beckum TF 904

Niemcy

2001

używany

na żądanie

INNO30108

Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible.

Jednostka ekstrakcyjna

Schuko VacoClean 120

Niemcy

nieznany

używany

na żądanie

INNO30107

Main pipe connection diameter: 120mm, pressure difference: 8000Pa, volume flow: 1200m³/h, connections: 3, container volume: 175l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2300mm. An on-site inspection is possible.

Tokarka CNC

Mori Seiki NL 2500

Niemcy

2005

używany

na żądanie

INNO30106

Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. Including short bar loader LNS Quickload Servo III (1500mm), year of manufacture: 2006. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.

Tokarka CNC

Mori Seiki NL 2500

Niemcy

2005

używany

na żądanie

INNO30105

Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. Including short bar loader LNS Quickload Servo III (1500mm), year of manufacture: 2006. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.

Tokarka CNC

Mori Seiki NL 2500/700

Niemcy

2005

używany

na żądanie

INNO30104

Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible.