Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [241 - 260 of 3047]

Maszyna do lutowania w oparach

Ibl SLC504

Niemcy

2005

używany

na żądanie

INNO31857

A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.

Automatyczna piła taśmowa

Forte BA321/SJP

Niemcy

1997

używany

na żądanie

INNO31856

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Suwnica pomostowa

Abus HB

Niemcy

nieznany

używany

na żądanie

INNO31855

Offered is an ABUS lightweight crane system with electric chain hoist and trolley. Load capacity: 500kg, rail length: approx. 5000mm. Inspection by appointment possible.

Centrum do cięcia strumieniem wody

Flow Europe HyPlex 50

Niemcy

2006

używany

na żądanie

INNO31854

A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible.

Nożyce gilotynowe

Ras 86.43

Niemcy

2000

używany

na żądanie

INNO31853

Offered is a RAS guillotine shear. Cutting length: 4040mm, max. steel sheet thickness: 5mm, backgauge range: approx. 5mm-1000mm, cutting angle: approx. 1.0°, stroke rate: approx. 28-46strokes/min, control system: RAS System 2005, weight: approx. 9200kg. Inspection by appointment possible.

Maszyna etykietująca

Bbk Sonderbau

Niemcy

2006

używany

na żądanie

INNO31851

A customized semi-automatic BBK labeling system for the pharmaceutical industry is available. Product shape: cylindrical, Bottle: amber glass bottle, Bottle volume: 10ml, Bottle height: 61mm, Bottle diameter: 25mm, Label dimensions X/Y: 265mm/33mm, Weight: approx. 175kg. The vacuum rail arm has a defect that is presumably caused by a pneumatic cylinder. Documentation available. An on-site inspection is possible.

Giętarka czterorolkowa

Haeusler VRM-hy 3000x70

Niemcy

1978

używany

na żądanie

INNO31850

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

Maszyna CNC do erodowania drutu

Sodick AQ750L

Niemcy

2005

używany

na żądanie

INNO31849

A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible.

Tor kublowy

Dudik/vahle/sew RK 2250/ FR 285 III/MKHS

Niemcy

nieznany

używany

na żądanie

INNO31848

A Dudik bucket conveyor system with trolley is available. Trolley: Dudik RK2250, Travel drive: Bockwoldt/SEW FR 285 III, Conductor rail: Vahle MKHS, Bucket volume: 2250l. The mechanical drive was renewed in 2013. Documentation available. An on-site inspection is possible. Expected to be available from January 2027.

Betoniarka

Eirich R15

Niemcy

1984

używany

na żądanie

INNO31847

Three nearly identical Eirich intensive concrete mixers are expected to be available from January 2027. Years of manufacture: 1974/1974/1984, Volume: 500l, Max. filling weight: 655kg, Mixing pan speed: 36rpm, Rotor speed: 130rpm, Rotor tool diameter: 880mm. Documentation available. An on-site inspection is possible.

System spawania na robotach

Cloos ROMAT 310 / ROTROL II-D

Niemcy

2002

używany

na żądanie

INNO31846

A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement.

Linia montażowa skrzydeł okiennych

Ruchser/max Striffler RU-GOB-ES

Niemcy

2007

używany

na żądanie

INNO31845

A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only.

Maszyna do cięcia szkła

Hegla VSG-A 46 MT

Niemcy

2002

używany

na żądanie

INNO31843

A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.

Maszyna do czyszczenia części

Ibs Scherer BK-50

Niemcy

2006

używany

na żądanie

INNO31842

A compact, manual parts cleaning unit (brush wash table) IBS Scherer is offered, designed for the material-friendly cleaning of oil- and grease-contaminated metal and plastic parts. Max. load capacity: 50kg, Capacity: 50l, Working height: approx. 820mm, Working surface internal dimensions X/Y: 646mm/465mm, Weight: approx. 15kg, Machine dimensions X/Y/Z: approx. 656mm/475mm/1005mm. Inspection possible by appointment.

Centrum obróbcze CNC

Quick Jet Depo-Jet

Niemcy

2001

używany

na żądanie

INNO31840

A CNC vertical machining center Quick Jet is offered. Travel X/Y/Z: approx. 1200mm/800mm/700mm, spindle taper: HSK-A80, max. spindle speed: 14000rpm, spindle power: 25kW, spindle torque: 170Nm, tool magazine: 16, max. tool length: approx. 300mm, max. tool diameter: 100mm, max. tool weight: 7kg, rapid traverse X/Y/Z: 24m/min, distance between table surface and spindle nose: 100mm-800mm, table size X/Y: 1350mm/1300mm, max. workpiece weight: 8000kg, control: Heidenhain TNC 530. Including HSK-A80 tool holder inventory. Machine dimensions X/Y/Z: approx. 3335mm/2780mm/3595mm, weight: approx. 11050kg. Inspection possible by appointment.

Automat CNC do cięcia na zimno

Kaltenbach SKL 400 NA

Niemcy

1994

używany

na żądanie

INNO31839

A refurbished Kaltenbach CNC cold circular saw with an L45NC length stop is available. Year of refurbishment: 2016, max. feed length: 1000mm, miter adjustment: +/-90°, saw blade dimensions X/Y/Z: 400mm/3.2mm/40mm, max. cutting diameter: 130mm, max. cutting capacity for rectangular material: 315mm/40mm, max. cutting capacity for square material: 120mm/120mm, cutting speed: 3000m/min, saw blade feed range: 0mm-1100mm/min, max. material feed speed: 10m/min, machine dimensions X/Y/Z: approx. 2350mm/1250mm/1800mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible.

Stół do prasowania

Veit Varioset

Niemcy

2013

używany

na żądanie

INNO31838

Various Veit ironing tables including Reverberi steam generators are available. 1) 7x Veit Varioset flat ironing table, ironing surface: 1300mm/650mm, height adjustment range: 830mm-990mm, weight: approx. 120kg. 2) 5x Veit pointed ironing table, ironing surface: 1100mm/380mm, weight: approx. 120kg. 3) 3x Reverberi GAK5DP steam generator, year of manufacture: 2013, version: Duplex, heating capacity: 5kW, operating pressure: 3bar. In addition, two steam generators and one flat ironing table are included as defective units. Documentation available. An on-site inspection is possible. Sale only as one complete package.

Pozostałe zapasy

Mbo/herzog+heymann/böwe/hunkeler ET46/Z2/310 Systec/ARAW 50-20

Niemcy

2001

używany

na żądanie

INNO31837

Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible.

Tokarka CNC

Traub TNM 42

Niemcy

1993

używany

na żądanie

INNO31836

A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115mm, max. back-side machining speed: 5600rpm, back-side machining torque: 18Nm, drilling/thread cutting station clamping range: 1mm-16mm, max. Q-axis working stroke: 25mm, max. drilling spindle speed: approx. 3500rpm, max. thread cutting spindle speed: approx. 1000rpm, weight: 3200kg, machine dimensions: approx. 2500mm/1120mm/1620mm. Inspection by appointment possible.

Wiertarka rzędowa

Gillardon R25

Niemcy

nieznany

używany

na żądanie

INNO31835

A conventional Gillardon multi-spindle drilling machine is available. Drilling units: 4, spindles: 4, drilling capacity in steel: 25mm, tapping capacity: M20, drilling stroke: 150mm, speed: 3000rpm/1400rpm. An on-site inspection is possible.