Maszyny Uzywane Niemcy - Innovac GmbH

Centrum obróbcze CNC

Yamazaki Mazak AJV-35/60

Niemcy

1988

używany

na żądanie

INNO26880

Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg.

więcej

Kompletny system lakierowania

Bürkle/finnrose/hackemack/sergiani KTR 2040/FLT 6/DAL1-1200/Monomatic S

Niemcy

1993

używany

na żądanie

INNO26879

A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible.

więcej

Komora suszenia ciągłego

Finnrose/dustcontrol Fodo-3-1/DC/DT 5000/1300

Niemcy

1993

używany

na żądanie

INNO26878

There are 2 Finnrose/Dustcontrol drying channels available. 1) Finnrose A/S Fodo-3-1, year of manufacture: 1993. 2)Dustcontrol DC/DT 5000/1300, year of manufacture: 1984. Air capacity supply air/exhaust air: 1200/1200m³/h, power requirement supply air: 7.5kN ex, heating medium: 120-100°C, heat quantity: 66.2kW. Solvent vapor quantity/D max.: 140l/min, solvent quantity/C max. 480g/min. On-site inspection is possible.

więcej

Zmywarka kapturowa

Hobart UXTLH-10A

Niemcy

2021

używany

na żądanie

INNO26877

Internal dimensions X/Y/Z: 1320mm/735mm/850mm, capacity: 30cycles/h, drain hose: 1800mm, supply hose: 2000mm, required flow rate: 5l/min, max. supply water temperature: 60°C, water consumption: 7.5l/rack, water tank capacity: 130l, rack dimensions X/Y/: 1240mm/700mm, loading height: 880mm, weight: approx. 435kg. Automatic programs: 5 (short, standard, intensive, continuous, hygiene), Housing: double-walled. Documentation available. On-site inspection is possible.

więcej

Hydrauliczna wiertnica gąsienicowa

Klemm KR 802

Niemcy

2001

używany

na żądanie

INNO26876

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.

więcej

Komórka robota szlifierskiego

Stäubli RX160L

Niemcy

2015

używany

na żądanie

INNO26875

A robot cell with 2x Stäubli grinding robots is available. The robots were used for steel grinding. Robot specifications: Axes: 6, payload: 14 kg, reach: 1900 mm, repeat accuracy: ±0.05 mm, control: Siemens, weight: 250 kg. Including all conveyor belts and peripheral equipment shown in the pictures. Documentation available. On-site inspection is possible.

więcej

Rozdrabniacz

Zeno ZTLL 1400x2300

Niemcy

2010

używany

na żądanie

INNO26874

Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available.

więcej

Składarka CNC

Ras 74.30

Niemcy

2004

używany

na żądanie

INNO26881

Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.

więcej

Rozdrabniacz

Zeno ZTLL 1400x1600

Niemcy

2010

używany

na żądanie

INNO26873

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

więcej

Wymiennik ciepła ze skrobakiem powierzchni

Gerstenberg Schröder FK01/120-1400

Niemcy

1989

używany

na żądanie

INNO26864

Max. Operating pressure: 20 bar, max. temperature range: 120°C.

więcej

Prasa ręczna

Otto Kaiser

Niemcy

nieznany

używany

na żądanie

INNO26871

There are 5 identical Otto Kaiser Pforzheim foot-operated toggle presses available. The pressing force is probably 120 kN.

więcej

Piła taśmowa

Hema Garant 800

Niemcy

2012

używany

na żądanie

INNO26868

Roller diameter: 800mm, cutting width/height: 780mm/390mm, saw blade length: 5600mm, cutting speed: 1650m/min, diameter of suction nozzle: 2x120mm. Dimensions X/Y/Z: 1090mm/1310mm/2380mm, weight: 720kg.

więcej

Laserowa prasa wykrawająca

Trumpf TruMatic 6000

Niemcy

2013

używany

na żądanie

INNO26865

Max. Sheet thickness: 8mm, max. cutting force: 220kN, laser power: 2700W, C-axis punching: 330rpm, max. stroke rate marking: 2800rpm. Tool rotation: 360°, punching tool size: 76.2mm, max. tool change time: 0.3s, punching/laser part flap size: 500mm x 500mm. Documentation available.

więcej

Nośnik form

Bbg BFT-H 14x9

Niemcy

2008

używany

na żądanie

INNO26870

Installation height min.: 770mm, max. stroke: 100mm, max. locking force: 210kN, max. mold mass lower part: 2000kg, max. mold mass upper part: 1500kg, mass of clamping unit: 4500kg, control: Siemens Simatic Panel. Clamping table dimensions X/Y: 1400mm/900mm, floor height: approx. 550mm, max. opening angle: 60°. Used for PU foaming of sliding glass roofs. Documentation available.

więcej

W pełni automatyczna maszyna pakująca

H. Böhl Junior/S-450 VA

Niemcy

2007

używany

na żądanie

INNO26872

Output for 125mm wide packing material: Winding ring speed: 250rpm, packing material width: 125mm, overlap: 35mm, net use: 90mm, output: 22.5m/min. Packaging material roll dimensions: Width: 125mm, max. roll diameter: 250mm, core diameter: 76mm, thickness: approx. 17-50my. Product dimensions: Length: 800mm to open, max. width: 300mm, max. height: 300mm. Machine dimensions X/Y/Z: approx. 1930mm/1600mm/1930mm, weight: approx. 1500kg. Including frequency converter Siemens Sinamics G110 and machine-specific conveyor technology. Documentation available.

więcej

Suwnica pomostowa

Wilhelm Reich ZTK A

Niemcy

1970

używany

na żądanie

INNO26866

Load capacity: 15t, lifting height: 5100mm, reach of crane/trolley: 14.44mm/2240mm, wheel diameter of crane/trolley: 500mm/315mm, number of wheels on crane/trolley: 4/4. Weight of trolley/total: 1085kg/8800kg. Load handling attachment: 2-roller lower surface with single load hook with 15t payload. Documentation available.

więcej

Frezarka/Prasa mimośrodowa/System czyszczenia ciągłego

Fritz-werner/imatec/weingarten/schuler/ixion FU-145/160/80

Niemcy

1980

używany

na żądanie

INNO26867

Several used machines are available, including 1) a Fritz Werner milling machine, 2) a Weingarten 160 eccentric press, 3) a Schuler 80 eccentric press, 4) a Nilfisk floor cleaning machine, 5) a belt squeegee oiler, 6) a continuous cleaning machine, 7) an Ixion threading machine, 8) push forks, 9) a reel and 10) a continuous heating channel. Some of these machines are defective or damaged.

więcej

Fryer

Günther Heim/jufeba CW-20

Niemcy

nieznany

używany

na żądanie

INNO26860

There are 7 different Günther Heim and Jufeba fryers available. On-site inspection is possible.

więcej

Kuchenka kremowa

Rego Herlitzius CK 60

Niemcy

2016

używany

na żądanie

INNO26859

Heating output: 6kW, filling capacity min./max.: 4l/38l, boiler: 60l, dimensions X/Y/Z: 1020mm/780mm/1635mm, weight: 155kg. Documentation available. On-site inspection is possible.

więcej

Maszyna do układania palet

Weimer UPHS

Niemcy

1996

używany

na żądanie

INNO26862

A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible.

więcej

Niezawodny partner u Państwa boku w zakresie używanych maszyn z Niemiec