Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [2001 - 2020 of 2765]

Maszyna do skórowania

Grasselli RST 520-M

Niemcy

2014

używany

na żądanie

INNO27356

There are 2 identical Grasselli membrane skinning machines available. 1) Year of construction: 2013, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. 2) Year of construction: 2014, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. On-site inspection is possible.

Piła taśmowa

Centauro 750

Niemcy

nieznany

używany

na żądanie

INNO27353

Saw blade length: 4330mm-4450mm, dimensions X/Y/Z: approx. 850mm/520mm/1800mm. An on-site inspection is possible.

Zbiornik do przechowywania surowego mleka

Fabdec Delta T

Niemcy

2015

używany

na żądanie

INNO27349

A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included.

Wytaczarka pozioma

Tos Varnsdorf W9A

Niemcy

1981

używany

na żądanie

INNO27344

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

Maszyna do formowania wtryskowego

Arburg 420C 1500

Niemcy

1999

używany

na żądanie

INNO27341

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 420C 1000

Niemcy

2013

używany

na żądanie

INNO27340

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 370S 600-100

Niemcy

2012

używany

na żądanie

INNO27339

Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.

Maszyna filtrująca

Omodei & Mena KFP 470/II

Niemcy

nieznany

używany

na żądanie

INNO27334

An Omodei & Mena yeast, grape and diatomaceous earth filter is available. Number of plates: 32, plate format: 500mm/500mm, thread: NW32, max. pressure: 1000bar. Including dry run protection.

Dwuwrzecionowe centrum obróbcze CNC

Stama MC 536

Niemcy

2009

używany

na żądanie

INNO27333

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Dmuchawa

Sig Corpoplast Blomax 12

Niemcy

2008

używany

na żądanie

INNO27319

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.

Hydrauliczny system testowy

Niehues DN200-DN600

Niemcy

2019

używany

na żądanie

INNO27302

A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.

Prasa dziurkująca

Edel Stanzprofi 400

Niemcy

nieznany

używany

na żądanie

INNO27294

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Szlifierka taśmowa

Heesemann LSM8-S

Niemcy

2004

używany

na żądanie

INNO27291

A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible.

Pilarka tarczowa z wieloma ostrzami

Paul Machinenfabrik K34G 0/1200

Niemcy

2006

używany

na żądanie

INNO27290

Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible.

Tokarka i frezarka CNC

Kekeisen VFB 2000

Niemcy

2012

używany

na żądanie

INNO27282

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

Prasa

Wmw KD2320

Niemcy

1971

używany

na żądanie

INNO27269

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Automatyczna maszyna do kontroli optycznej

Göpel Opticon BasicLine NP

Niemcy

2009

używany

na żądanie

INNO27266

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.

Podajnik płyt SMT

Feeder Rüttelfeeder/8mm-44mm

Niemcy

nieznany

używany

na żądanie

INNO27262

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.