Used machines Germany - Innovac GmbH

Crane

Abus GM3 500.6

Germany

1994

used

on request

INNO29495

Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.

more

Safety Sensor Device

Sick S30B-2011GB

Germany

2015

used

on request

INNO29494

A total of 21x Sick 2D area monitoring safety sensor devices are available. Area of application: indoor areas, scanning angle: 270°, protective field range: 2000mm, warning field range: 8000mm, distance measuring range: 30000mm, field sets: 1, fields: 3, resolution: 30mm/40mm/50mm/70mm, angular resolution: 0.5°, response time: 80ms, interfaces: RS-232/RS-422, documentation available. On-site inspection is possible.

more

Sheetfed Offset Press

Man Roland R 709 3B LTT UV

Germany

2006

used

on request

INNO29493

Equipment: 8DLTTD + ColdFoil, printing units: 9, coating unit: 1, process: UV offset. Printing capacity: 12000 sheets/h, min. sheet format X/Y: 350mm/500mm, max. sheet format: 740mm/1040mm, max. print format: 710mm/1026mm, material thickness range: 80g-600g/m², gripper margin: 11mm, pile height feeder/delivery: 1400mm/1500mm. Counter reading: approx. 257 million, operating hours: 92553h. Documentation available. On-site inspection is possible.

more

Drum Mixer

Müller FTM 300 MG1

Germany

2014

used

on request

INNO29490

Two identical mixers from Müller GmbH are available. Payload: 200kg, process: Tumbling/mixing, bung drum volume range: 100l-200l, mixing speed: 15rpm, drum diameter: 560mm, max. drum height: 885mm, mixing angle range: 0°-180°, machine dimensions X/Y/Z: approx. 1400mm/2000mm/1800mm. One of the machines was used sporadically, the other hardly ever. Documentation available. On-site inspection is possible.

more

Screen Printing Machine

Werner Kammann 4, 15, 22

Germany

1982

used

on request

INNO29488

Inks: 6, UV dryer: 4, disk diameter: 120mm, cycle time: 75 cycles/min, print length: 315mm, print speed: 4200 prints/h. On-site inspection is possible.

more

Shredder

Cushion Pack CP 428 S2

Germany

2011

used

on request

INNO29487

A Cushion Pack cardboard shredder is available. Cutting width: 420mm, max. inlet height: 20mm, shredding capacity: approx. 6m³-9m³/h, working height: 890mm, feed speed: 14m/min, motor power: 3kW. Machine dimensions X/Y/Z: approx. 1100mm/750mm/800mm, weight: approx. 250kg. Including suction unit. Documentation available. On-site inspection is possible.

more

CNC Coordinate Measuring Machine

Keyence VL 500

Germany

2023

used

on request

INNO29486

A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

more

CNC Circular Grinding Machine

Gsn PF5 UM100

Germany

2013

used

on request

INNO29483

A CNC cylindrical grinding machine GSN Schleiftechnik including automatic paper belt filter, center point, diamond dressing tiles and grinding wheel changing aid is available. Workpiece length: 1500mm, max. workpiece diameter: 250mm, max. workpiece weight: 150kg, machine dimensions X/Y/Z: approx. 6300mm/2500mm/2500mm, weight: approx. 9000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

more

Belt Conveyor

Rheta

Germany

unknown

used

on request

INNO29481

A RHETA conveyor belt is available. Center distance: approx. 9300mm, belt width: 500mm. On-site inspection is possible.

more

Planing Machine

Reichle & Knödler P 4000

Germany

1965

used

on request

INNO29480

Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Deckel Maho DMC 70 H duoBlock

Germany

2005

used

on request

INNO29479

Travel X/Y/Z: 750mm/800mm/800mm, table dimensions X/Y: 500mm/500mm, max. table load: 800kg, tool holder: SK40, speed: 18000rpm, tool positions: 120, machine weight: approx. 17000kg, control: Siemens Sinumerik 840D, operating hours: approx. 85532h, spindle hours: approx. 44907h. Including a filter system with a 900l coolant tank, a chip conveyor and a Renishaw measuring probe. The machine spindle was replaced by Deckel Maho in 2022. Documentation available. On-site inspection is possible.

more

Injection Moulding Machine

Arburg 220 S/250-60

Germany

1997

used

on request

INNO29478

Clamping force: 250kN, approach force: 20kN, opening force: 65kN, max. opening stroke: 275mm, mold installation height: 200mm, platen distance: 475mm, column distance: 220mm, platen dimensions X/Y: 400mm/400mm, screw diameter: 22mm, stroke volume: 30cm³, molded part weight: 25g/hp, weight: approx. 1900kg, operating hours: approx. 42046h. Documentation available. On-site inspection is possible.

more

Panel Saw

Homag CH-03/32/22

Germany

1997

used

on request

INNO29477

A Homag horizontal panel saw is available. Saw blade outer diameter: 300mm, saw blade inner diameter: 75mm, speed: 4550rpm, scoring saw blade outer diameter: 125mm, scoring saw blade inner diameter: 45mm, speed: 5100rpm, cutting height: 50mm, cutting width: 1250mm/2200mm, workpiece length: 3200mm. Total system dimensions X/Y/Z: approx. 4700mm/5000mm/2000mm, machine weight: approx. 3500kg. Including saw blades and various spare parts. Documentation available. On-site inspection is possible.

more

CNC Grinding Machine

Junker Jucrank 3000/50

Germany

2001

used

on request

INNO29476

A defective Junker CNC crankshaft grinding machine is available. Workpiece diameter range: 35mm-70mm, max. workpiece length: 500mm, grinding wheel diameter: 350mm, bore: 127mm, pad width: 30mm, peripheral speed: 140m/s. Machine dimensions X/Y/Z: approx. 7200mm/3900mm/2700mm, weight: approx. 8000kg, VRF system weight: approx. 5700kg. Including Knoll cooling lubricant system with filter and sludge dryer. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Chiron FZ 15 S

Germany

2005

used

on request

INNO29475

A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible.

more

CNC Lathe

Traub TNS 65D

Germany

1991

used

on request

INNO29474

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D, operating hours: 19465h. Documentation available. On-site inspection is possible.

more

CNC Lathe

Traub TNS 65D

Germany

1991

used

on request

INNO29473

A CNC lathe is available. Turning diameter over bed: 450mm, turning length: 630mm, spindle bore: 65mm, speed: 4000rpm, rapid traverse: 15m/min, power: 57kW, travel X/Z: 175mm/630mm, tool positions: 12+8+4, machine dimensions X/Y/Z: approx. 4000mm/2200mm/2200mm, weight: approx. 6500kg, control: Traub System TX-8-D. Documentation available. On-site inspection is possible.

more

Reverse Osmosis System

Mwt

Germany

unknown

used

on request

INNO29472

A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.

more

Washing, Filling and Sealing Line

Niko/khs/krones 36.75.750.100/Innofil DNR 80/Starmatic

Germany

1999

used

on request

INNO29471

A complete bottle filling line for cold and hot products is available. Bottle types: 0.25l/0.33l/0.5l vegetable/0.75l Bordeaux/0.75l fruit oasis/1l VdF/1l PET hotfill. Closure types: 28er Alu-Anroll/33er TWO/43er TWO/PET closure. Products: Cold fill CO2/pressurized hot fill below 100°C/pressurized hot fill above 100°C. Carton outer packaging: tray/wrap-around, total line output: approx. 27000 bottles/h. 1) Bottle washer Niko 36.25.750.100, year of manufacture: 1999, control: Siemens S7, spare parts package: available. 2) Bottle filling machine KHS Innofill DNR80, year of manufacture: 1999, control system: Siemens S7 with HMI renewed in 2015, filling stations: 80, filling temperature range: 10°C-104°C, products: Soft drinks/mineral water/fruit juices, spare parts package: available. 3) Screw capper (connected to the KHS) Alcoa 15 VK, year of manufacture: 1999, cap types: 28 mm aluminum and 43 mm plastic caps, sorting units: 2, replacement spindles: available, spare parts package: available. 4) TWO capper Italmeccania/Crown S4BLH, year of manufacture: approx. 1993, control: Siemens S7, capper type: belt capper, spare parts package: available. Including suction unit and sorting unit for TWO sheet metal closures. 5) Tunnel pasteurizer/recooler Göbel Tuchenhagen K1-35-175, year of construction: approx. 1993, control: contactor control, heating zones: 3, cooling zones: 2, fresh water zones: 1, belt width: 3500mm, length: approx. 16000mm. 6) Drying tunnel Europool TF03, year of construction: 2007, control system: Siemens S7, blower: 3. 7) Krones Starmatic high-speed labeling machine, year of manufacture: 1991, control system: Siemens S5, spare parts package: available. 8) Sleever Krones, year of manufacture: 2007, control system: Siemens S7, sleeve dimensions X/Y: 139mm/149mm, sleeve magazine: available, spare parts package: available. 9) Wrap-around packaging machine Kisters 320/50, year of manufacture: 1999, control: Rexroth Indramat, packaging capacity: 50 cycles/min, packaging type: tray/wrap-around, spare parts package: available. Including a Nordson Problue 14 gluing unit and automatic glue conveyor. 10) Shrink tunnel Krones Schrinkmat 5000, year of construction: 2007, heating zones: 10, spare parts package: available. Including suction unit. 11) Indspect fill level label inspection machine, inspection method: Inclined seat inspection/fill tube detection/lid detection/fill level inspection/vacuum inspection and label inspection. 12) KHS Lord 1BSN2 palletizing system, year of manufacture: 1999, control system: Siemens S7, pallet formats: Düsseldorfer pallet/Euro pallet/industrial pallet, pre-grouping station: available. 13) 2-sided label printer Logopak 920 II PF, year of manufacture: 2004, label dimensions X/Y: 148mm/210mm. 14) Various conveyor belts for product transport between the above-mentioned machines. Documentation available. On-site inspection is possible.

more

CNC Cycle Lathe

Voest-alpine E 50/2

Germany

1992

used

on request

INNO29470

Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.

more