Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [221 - 240 of 2462]

CNC Laser Marking System

Trotec SP 1500

Germany

2018

used

on request

INNO28870

A Trotec CNC laser marking machine is available. Working area X/Y: 1500mm/1250mm, loading area X/Y: 1700mm/1600mm, max. working height without table: 185mm, max. processing speed: 1.65m/s, acceleration: 1G, repeat accuracy: +/-30µm, max. workpiece weight: 25kg. Laser type: CO2 laser, laser class: 2, laser power: 200W, power consumption: 9.5kW. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/1300mm, weight: approx. 1300kg, transport dimensions X/Y/Z: approx. 3100mm/2350mm/1650mm. Including suction unit. Documentation available. An on-site visit is possible.

Bridge Saw

Weha Master

Germany

unknown

used

on request

INNO28869

A bridge saw for the mining industry, especially for stone, is available. An on-site visit is possible.

Lift Truck

Still/gram EGV14/K41

Germany

2020

used

on request

INNO28868

A Still pallet truck including a Gram pallet scale are available. 1) Electric pallet truck Still EGV 14, year of manufacture: 2003, load capacity: 1400kg, load center distance: 600mm, fork length: 1150mm, turning radius: 1500mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/2000mm, weight: approx. 1200kg. The accumulator of the trolley is weak and one fork is bent. 2) Gram K4i pallet scale, year of manufacture: 2020, machine dimensions X/Y/Z: approx. 1200mm/800mm/200mm. Documentation available. On-site inspection is possible.

Container Press

Husmann SPB 20 SEN-E

Germany

2007

used

on request

INNO28867

Two Husmann self-pressing containers are available. Volume: 20m³, drive power: 5.5kW, pressing force: 34t, top feed opening: 1470mm/1860mm, bottom feed opening: 970mm/1860mm, feed height: 1380mm, time per pressing process: 42s, stroke volume: 1.14m³, theoretical hourly output: 95m³, machine dimensions X/Y/Z: approx. 6400mm/2550mm/2600mm. Documentation available. An on-site visit is possible.

Hydraulic Press

Hymag HE 15 SSET

Germany

1998

used

on request

INNO28866

A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible.

CNC Lathe

Traub TNC 42/65 DGY

Germany

1996

used

on request

INNO28865

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

CNC Double Spindle Lathe

Traub TNC 42/65 DGY

Germany

2015

used

on request

INNO28864

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

CNC Machining Center

Briesse Rover Plast A FT 1531

Germany

2017

used

on request

INNO28863

Travel X/Y/Z: 3100mm/1530mm/150mm, spindle power: 13.2kW, tool holder: HSK F63, table rotation range: 360°, speed: 24000rpm, tool positions: 16, vacuum pump capacity: 250m³/h, connected load: 35kW, machine weight: approx. 6000kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Deckel Maho DMU 50 eVolution

Germany

2005

used

on request

INNO28862

Travel X/Y/Z: 500mm/420mm/380mm, table dimensions X/Y: 500mm/380mm, max. table load: 200kg, speed: 18000rpm, tool holder: SK40, tool positions: 30, rapid traverse X/Y/Z: 50m/min, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2500mm, weight: approx. 6000kg. The table of the machine has an inclination error. Documentation available. On-site inspection is possible.

Laminating System

Suchy/klieverik/tekatex

Germany

2021

used

on request

INNO28861

A complete laminating line is available. General data: Fabric weight range: 125g/m²-1800g/m², fabric width range: 1050mm-3200mm, upper roller width: 3400mm, creep speed: 2m/min, creep speed: 10m/min, production speed: 100m/min, total system length: 28100mm. 1) Fabric storage infeed and outfeed Suchy, year of construction: 2012, roller width: 3400mm, guide roller diameter: 200mm, max. fabric thickness: 20mm, max. fabric width: 3200mm, fabric storage: approx. 50m, operating speed: 60m/min, machine dimensions X/Y/Z: approx. 4200mm/5550mm/3600mm, weight: approx. 4250kg. 2) Powder control Klieverik, scattering roller width: 3500mm, scattering roller diameter: 188mm, max. scattering width: 3200mm, max. scattering capacity: 2000g/m/min, powder size range: 100µm-600µm, machine dimensions X/Y/Z: approx. 4750mm/600mm/700mm, weight: approx. 1100kg. 3) Laminating machine Klieverik, year of construction: 2012, printing blanket dimensions X/Y/Z: 7310mm/3500mm/7mm, heating power: 100kW, heating cylinder diameter: 760mm, thermal oil tank: 800l, max. working temperature: 240°C, heating time at 3m/min and 6m/min: approx. 2h/3h, machine dimensions X/Y/Z: approx. 2100mm/5000mm/2300mm, weight: approx. 9000kg. 4) Winder Tekatex WL-35, year of construction: 2022/2023, working width: 3500mm, machine dimensions X/Y: 4500mm/1050mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Motor

Abb M3GP 400LB 8 B3

Germany

2008

used

on request

INNO28860

Speed: 892rpm, current consumption: 660A, Cos: 0.83, power: 355kW, insulation class: F, operating mode: continuous operation. On-site inspection is possible.

Optical Measurement System

Keyence LS-9000

Germany

unknown

used

on request

INNO28859

Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.

Robot

Universal Robots UR-3e

Germany

2022

used

on request

INNO28858

Two Universal Robots Universal Robots are available. 1) Universal Robot UR-3e, year of manufacture: 2020, payload: 3kg, reach: 500mm, axes: 6, repeat accuracy: +/-0.03mm, weight: approx. 11kg, operating hours: under 5000h. 2) Robot Universal Robot UR-3e, year of manufacture: 2022, payload: 3kg, reach: 500mm, axes: 6, repeat accuracy: +/-0.03mm, weight: approx. 11kg. Documentation available. On-site inspection is possible.

Cutting Machine

Krumbein BBS

Germany

2002

used

on request

INNO28857

A Krumbein horizontal slicing machine for baked goods is available. Material: stainless steel, max. product height: 90mm, max. product width: 140mm, machine dimensions X/Y/Z: approx. 500mm/1200mm/550mm, weight: approx. 150kg. On-site inspection is possible.

Center Lathe

Weipert W 800e

Germany

1961

used

on request

INNO28856

Rotation diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, spindle bore: 52mm, speed: 1400rpm, quill taper: MK4, quill adjustment: 160mm, upper part displacement 10mm, machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.

CNC Cutter

Kuris ZAT III CNC

Germany

unknown

used

on request

INNO28855

A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Demag/engel Concept/ET/VC

Germany

2007

used

on request

INNO28854

Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible.

Granules Dryer

Piovan DP620/TN600

Germany

2012

used

on request

INNO28853

Dryer: Diameter of process line/regeneration drain line/compressed air line: 88.9mm/50mm/8mm, degree of filtration: 20µm, filter area: 0.24m², max. process temperature: 200°C, weight: approx. 415kg. Tank: diameter: 996mm, height: approx. 2000mm, total height: approx. 2450mm, empty weight: approx. 160kg. Documentation available. On-site inspection is possible.

Vertical Eroding Machine

Agie EMS 2-20

Germany

1978

used

on request

INNO28852

Travel X/Y/Z: 320mm/220mm/385mm, max. workpiece dimensions X/Y/Z: 490mm/370mm/340mm, max. workpiece weight: 600kg, max. electrode force: 800N, magnet dimensions X/Y: 400mm/200mm, container dimensions X/Y/Z: 650mm/530mm/420mm, operating hours: approx. 23000h. Including clamping system, clamping head, extinguishing system and digital position indicator. Documentation available. On-site inspection is possible.

CNC Machining Center

Mcm Clock 600 MP7

Germany

2000

used

on request

INNO28849

Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible.