Used machines Germany - Innovac GmbH

Remaining Stock

Joos/frommia/schwabedissen/ayen FS 60

Germany

1985

used

on request

INNO29365

Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible.

more

Veneer Press

Bürkle FPMU 250/120

Germany

1965

used

on request

INNO29364

Two identical Bürkle veneer presses are available. Press area: 1200mm/2500mm. Stages: 1. piston: 6. piston stroke: 450mm. Total pressing force: 16t. Machine dimensions X/Y/Z: approx. 3250mm/1350mm/1950mm. Weight: approx. 2500kg. On-site inspection is possible.

more

CO2 Laser Cutting Machine

Sei S.p.a. PL 121 DieCut

Germany

1999

used

on request

INNO29363

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

more

Spark Erosion Machine

Ops-ingersoll Gantry Eagle 500

Germany

2012

used

on request

INNO29361

An OPS-Ingersoll die-sinking EDM machine is available. Travel X/Y/Z: 525mm/400mm/450mm, C-axis: 360°, table dimensions X/Y: 750mm/650mm, max. workpiece weight: 1000kg, container dimensions X/Y/Z: 770mm/670mm/440mm, generator power (Eagle Powertec): 60A, electrode changer: 20-fold, high-speed jump: 18m/min, fine finishing generator: PT60, weight: approx. 5000kg, control: Eagle Powertec PC/NC 3060. 5000kg, control: Eagle Powertec PC/NC 3060, including compressor recooling unit, CO2 fire extinguishing system and pressure rinsing. Documentation available. On-site inspection is possible.

more

Dissolver

Grieser GFVD 750 FU

Germany

2009

used

on request

INNO29360

A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible.

more

CNC Universal Milling Machine

Deckel FP 5 CCT

Germany

1990

used

on request

INNO29359

Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible.

more

Lathe

Dmt KD 400 TWIN

Germany

2018

used

on request

INNO29358

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

more

Container Press

Husmann SPB 24 SEN

Germany

1993

used

on request

INNO29357

Press force: 340kN, drive power: 5.5kW, volume: 24m³, max. operating pressure: 200bar, insertion dimensions X/Y: 1470mm/1860mm, transport dimensions X/Y/Z: 7200mm/2500mm/2600mm, empty weight: approx. 5300kg, max. total weight: approx. 13500kg. On-site inspection is possible.

more

Rolling and Foiling machine

Schüco Isomat 4

Germany

1994

used

on request

INNO29356

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

more

Rotary Lobe Pump

Netzsch Tornado T.Proc T2

Germany

2019

used

on request

INNO29355

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

more

CNC Vertical Machining Center

Röders RFM 600

Germany

2000

used

on request

INNO29354

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

more

Thermal Oil Heater

Htt wtö-rg 1000-40-1-X-H

Germany

2016

used

on request

INNO29353

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.

more

CNC Vertical Lathe

Emag VL 5i

Germany

2011

used

on request

INNO29352

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

more

Bar Loader

Index MBL65.4200

Germany

2021

used

on request

INNO29351

A bar feeder index is available. Bar diameter (round material): 10mm-65mm, max. bar diameter (hexagonal material): 55mm, max. bar diameter (square material): 46mm, bar length range: 1700mm/4200mm, feed force: 1500N, rapid traverse: 50m/min, feed rate: 30m/min. Machine length: approx. 5300mm, machine weight: approx. 2700kg. Documentation available. On-site inspection is possible.

more

CNC Circular Grinding Machine

Junker EJ 11

Germany

2009

used

on request

INNO29350

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

more

Winding Machine

Sahm 260 E

Germany

1995

used

on request

INNO29349

A winding machine SAHM for the textile industry is available. Heads: 182, core: 90mm, stroke: 400mm. Conversion to 200/250 is possible. On-site inspection is possible.

more

Parts Cleaning System

Mafac Elba

Germany

2005

used

on request

INNO29348

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

more

CNC Multi Spindle Lathe

Index MS32G

Germany

2002

used

on request

INNO29346

A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible.

more

Remaining Stock

Malucha/fama/mep/ips SK35/Cobra 350 MA/8013

Germany

unknown

used

on request

INNO29345

Various metalworking machines are available. 1) Eccentric punching press Malucha SK35. 2) Band saw Fama. 3) Semi-automatic circular saw MAP Cobra 350 MA. 4) Pneumatic C-frame press Ips 8013, pressing force: 80kN, weight: 39kg. 5) Long welding machine. 6) Compressor Renner RDT. 7) Compressor Renner RKT. 8) Welding machine Oerlikon Minicito 304. 9) Welding machine Oerlikon Minicito 304. 10) Hand lever bending machine VEB. 11) Welding machine Oerlikon Minicito 304. 12) Hand lever bending machine VEB MWG-S. On-site inspection is possible.

more

Press Brake

Promecam 02 100 40 115

Germany

unknown

used

on request

INNO29344

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

more